Vertical Processing Centers used for sale (226)

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

Manufacturer: DOOSANYear: 2008Type: CNC Vertical Machining CenterNumerical Control: FANUC 0i-M SeriesStrokes: X 1020 mm / Y 510 mm / Z 525 mmFast Feeds: X/Y 36 m/min – Z 30 m/minSpindle: 12,000 rpm – 11 kW (continuous)Tool magazine: 30 toolsTable: 1200 × 500 mm – max. load 799 kgAccuracy: ±0.005 mm – repeatability±0.003 mmDimensions (mm): 2795 × 2850 × 2275Weight (kg): 6500 Auction-ID: A1-46647-211

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D)Strokes: X 1,000 mm / Y 600 mm / Z 600 mmTable: 1,250 ×,800 mmTool changer: 30 positionsSpindle taper: SK 40 (DIN)Spindle speed: up to 15,000 rpmSpindle motor power: 18 / 15kW IKZ / CTS: 40 barEquipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-46647-243

Key data: 762 mm, 630 mm, 610 mm

Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D PowerlineStrokes: X 640 mm / Y 600 mm / Z 500 mmTable: 850 × 600 mmMaximum table load: 600 kgSpindle taper: SK 40 (DIN 69871)Spindle speed: 1 – 8,000 rpmFast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Toolchanger: 30 positionsSpindle motor power: 12 / 17 kWEnergized hours: 43,000 hOperating hours: 15,000 hNote: Without tool holder Auction-ID: A1-46647-242

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

Control: Heidenhain iTNC 530 Speed: 10,000 rpm Travel in X/Y/Z: 1,050/540/720 mm Spindle: Technology: Belt spindle Speed: 10,000 rpm Power: 12 kW Tool holder: SK40 Work table: Clamping area: 1,120 x 610 mm Table load (max.): 1,000 kg General: Tool magazine: 30 stations Rapid traverse in X/Y/Z: 36/36/30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ pump with filter and high pressure Setup operation: Electronic handwheel Other accessories: Div. gebr. Tool holder and 3 pcs machine vices (1x 125/2x 160), rinsing gun Auction-ID: A7-46660-102

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

Manufacturer: FAMUPYear: 1998Type: CNC vertical machining centerNumerical control: Heidenhain 410 AC.Strokes: X 1000 mm / Y 470 to 600 mm / Z 470 to 600 mm (according to documentation)Table: 1300 x 520 mm – T-slots 5 x 18 mm (pitch 100 mm) – max. load 800 kgSpindle: ISO 40 DIN 69871 – AC Brushless – 50 to 8000 rpm – 11 kW (30 min) / 7.5 kW S1Feeds: X/Y/Z 10000 mm/min – X/Y/Z 30000 mm/min fasttool magazine: 24 positions – max. tool diameter 94 mm – max. length 280 mm – max. weight 6 kg – changeover time 3 sEquipment: without spindle center coolant, without chip conveyor, sold without toolsDimensions: 4247 x 3105 x 3310 mmWeight: 6000 kgLots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-221

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

Manufacturer: SIGMAYear: 2002Type: CNC Vertical Machining CenterNumerical Control: FANUC 18MAxes: 3-Axis (X, Y, Z)Strokes: X 750 mm / Y 400 mm / Z 450 mmTable: 900 x 400 mm – max. load 600 kgSpindle: SK40 (DIN 69871-A) – 6,000 rpm – 15 kW – max. torque 191 NmTool magazine: random carousel – 21 toolsGuides: Linear guides Weight: 6,000 kgRemarks: Italian-made CNC vertical machining center, functional machine. Auction-ID: A1-46647-223

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

CNC vertical machining center for machining metal parts. CNC control: Heidenhain TNC 410Axes: 3 axesStrokes: X 1,020 mm / Y 610 mm / Z 560 mmTable: 1,400 ×,650 mmMaximum load table: 2,000 kgSpindle taper: BT 40Spindle speed: 10,000 rpmSpindle power: 15 kWTool changer: 40 positionsHigh-pressure coolant: 20 bar through spindleEquipment: Chip conveyor, 2 augers, spindle cooling, closed cab, machine lighting Auction-ID: A1-46647-247

The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.

Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO)Year: 1990Type: CNC Vertical Machining CenterCNC Numerical Control: FANUC Series 15-MAxes: 3-axis (X, Y, Z)Strokes: X 1030 mm / Y 210 mm / Z 610 mmSpindle: BT40 – up to 6000 rpm – power approx. 11 kWTool magazine: 20 positions BT40Weight: approx. 6000 kgOrigin: TaiwanNotes: Heavy-duty CNC vertical milling and boring machine for general machining. Auction-ID: A1-46647-228

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left

CNC vertical machining center for machining metal parts. Axes: 3-axisStrokes: 610 x 410 x 450 mmNumerical Control: Fanuc OTEquipment: Chip ConveyorManufacturer: Yang Iron Works Co., Ltd.Country of Manufacture: TaiwanSerial No.: Z00321 Auction-ID: A1-46647-239

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

Machine sold without tools Included only probe Auction-ID: A1-46647-1

The machine is in good technical condition, testing is possible by prior arrangement.

Manufacturer: HARTFORDYear: 1999Type: CNC Vertical Machining CenterNumerical Control: FANUC O-MAxes: 3 Axes (X, Y, Z)Strokes: X 1000 mm / Y 500 mm / Z 550 mmSpindle: BT40 – 8000 rpmEquipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation)Condition: Machine in working order, loaded on truck (LOADED)Condition: used Auction-ID: A1-46647-229

Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

X / Y / Z axis strokes: 1020 × 510 × 550 mmSpindle power: 11 kWMax. spindle speed: 6,000 rpmSpindle taper: BT 40Tool magazine: 22 positionsWeight (kg): approx. 6000Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-251

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

CNC vertical machining center for machining metal parts. CNC control: Fanuc 0MStrokes: X 850 mm / Y 440 mm / Z 630 mmTable: 940 × 400 mmMax. table load: 250 kgSpindle taper: BT 40Spindle speed: 45 – 8,000 rpmSpindle motor power: 7.7 / 5.5 kWTool changer: 22 positionsProjection: 380 mmTotal power: 10 kVAVoltage: 380 V Auction-ID: A1-46647-240

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

Year: 1995Serial No.: 488-11Type / Function: 4-axis vertical CNC machining centerConfiguration: 2 pallets, 2 × 4th axis Peiseler RT 160Numerical control: SIEMENSSpindle: New spindle replaced in 2021Included equipment: KNOLL filter unit, chip conveyorWeight: 4000 kg Auction-ID: A1-46647-271

The machine is in good technical condition, testing is possible after prior agreement. The machine is mechanically worn (play in the table axes approx. 0.1 mm). The gearbox is currently not shifting (when trying to change gear, there is no signal about shifting).

Control: Siemens Acramatic A2100 Di Speed: 6,000 rpm Travel in X/Y/Z: 510/510/510 mm Spindle: Technology: Belt spindle Speed: 6,000 rpm Tool holder: SK40 Work table: Clamping area: 700 x 520 mm Table load (max.): 500 kg General: Tool magazine: 21 stations Rapid traverse in X/Y/Z: 24/24/24 m/min Equipment/accessories: Chip management: chip tray Coolant management: IKZ pump with filter and high pressure Tool Measurement: Pushbutton, Renishaw TS27R Setup operation: Electronic handwheel Other equipment: Div. gebr. Tool holder and 1 pc. machine vice (Allmatic HD 125), transformer ATTENTION: The machine is not wide and is sold as a parts carrier. According to the dispenser, the control (board) is defective. Auction-ID: A7-46660-129

Control Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

CNC Control: FANUC 0M (original manual)Number of axes: 3Axis strokes: X 1100 mm / Y 650 mm / Z 800 mmMaximum spindle speed: 8000 rpmCooling: with coolantSpindle taper: BT40Tool changer: automatic, 30 stationsYear: 1994Manufacturer: SUPERMAX Auction-ID: A1-46647-269

CNC Vertical Machining Center DECKEL MAHO DMF 260 linear NEW DMG Design With rail control Siemens 840 D with Shop Mill Year of Make: 2011 Travel: X 2600 Y 700 Z 700 Speed range: 20 – 14000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 2920 mm x 750 mm clamping surface Controlled swivel milling head ( B axis ) NC Dividing head Hofmann with tailstock tip height: 200 mm Vertical tool changer with 40 magazine positions ( SK 40 ) Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ 40 bar Chip conveyor Operating mode 3 + 4 2 x Rotoclear (rotating lens) Partition wall Coolant Setup Control cabinet cooling unit RITTAL 4 Height Adjustable Machine Shoes Operating instructions

Manufacturer: DMG (Deckel Maho Gildemeister)Year: 2006Type: CNC Vertical Machining CenterNumerical Control: Heidenhain TNC 530Strokes: X 635 mm / Y 510 mm / Z 460 mmSpindle: 12,000 rpmTool magazine: 32 positionsSpindle center coolant: 20 barFiltration: Cartridge filtrationTooling: No tooling supplied with the machineWeight (kg): approx. 6000Notes: Multi-purpose CNC vertical machining center. Serial number included in the description. Auction-ID: A1-46647-216

Inv. Num. : 8973 Type: MCFV 1680 Producer: ZPS Created: 2010 Parameters: Work table length: 1800 mm Work table width: 780 mm X-axis travel: 1650 mm Y-axis travel: 810 mm Travel Z axis: 810 mm

Year: 1998Serial No.: 458-66Type/Function: 4-Axis Vertical CNC Machining CenterConfiguration: 2 Pallets, 2 × 4th Axis TsudakomaNumerical Control: SIEMENSIncluded Equipment: KNOLL Filter Unit, Chip Conveyor Auction-ID: A1-46647-270

Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change

CNC Machining Center JOHNFORD VMC-850 | Year of construction 2023 | FANUC | 60-fold tool changer Manufacturer: JOHNFORD Model No.: VMC-850 Machine Type: CNC Machining Center Year of manufacture: 2023 Operating hours: approx. 667 h ⸻ CNC control • FANUC 0i-MF Plus • Manual Guide i • Dual Check Safety (safety software) ⸻ Spindle & Tool Changer • Tool changer with double-arm gripper • 60 tool positions • Tool holder: SK40 • Milling spindle: 5.5 / 7.5 kW • Speed: up to 12,000 1/min ⸻ Measuring & Cooling Systems • Glass scales in X, Y and Z axes • IKZ 30 bar through the spindle • Programmable air/water switching • Oil mist extraction, programmable • Renishaw OMP40-2 touch probe (wireless) • Renishaw OTS tool measuring tool setter (wireless) ⸻ Workspace • X-axis travel: 800 mm • Y-axis travel: 500 mm • Z-axis travel: 6 ...

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

Manufacturer: FAMUPYear: 1994Type: CNC vertical machining centerNumerical control: FANUC Series O-MStrokes: X 600 mm / Y 400 mm / Z 400 mmTable: 400 × 400 mm – max. load 300 kgSpindle: ISO / SK 40 – 6,000 rpm – 11 kWTool magazine: 18 positions – Max. tool Ø 75 mm – changeover time 2 sChip conveyor: YesDimensions (mm): 3200 × 2900 × 2600Weight (kg): approx. 3500Notes: Italian-made CNC vertical machining center, suitable for general milling. Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-219

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions

CNC Control: HAASX/Y/Z Axis Travels: 750 × 410 × 500 mmMax. Spindle Speed: 10,000 rpm4th Axis: HAAS Compatible (Presence Shown)Spindle Hours: Approx. 19,678 h (Meter Reading)User Documentation: Present Weight (kg): Approx. 5600Year & Manufacturer: 2000 – HAAS Auction-ID: A1-46647-256

Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System

CNC Control: SIEMENS 810 DX/Y/Z axis strokes: 1020 × 510 × 510 mmTable dimensions: 1200 × 500 mmPermissible load on table: 800 kgMax. spindle speed: 10,000 rpmSpindle power: 10 kWSpindle taper: ISO 40Tool changer: 20 positionsWeight (kg): 5800Year & Manufacturer: 2000 – HURON Auction-ID: A1-46647-250

Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar

CNC Control: FANUC series O-MAxis strokes: X 600 mm / Y 420 mm / Z 450 mmTable: 750 × 400 mmSpindle speed: 6000 rpmSpindle power: 13 kWSpindle taper: ISO 40Tool changer: 30 positionsIncluded equipment: NIKKEN 4th axis divider Ø 250 mmYear: 1989Manufacturer: SIGMALots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-267

Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading

CNC vertical machining center for machining metal parts. Numerical control: Hurco WinMaxAxes: 4 axes (including 1 rotary axis)Strokes: X 660 mm / Y 355 mm / Z 457 mmTable: 762 × 355 mmMaximum load table: 500 kgSpindle taper: ISO 40Spindle speed: 10,000 rpmSpindle power: 11 kWTool changer: 24 tools (RANDOM type)Equipment: 1-axis divider with tailstock Auction-ID: A1-46647-245

Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Equipment Chip conveyor Signal lamp Tool measuring arm Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basi ...

Manufacturer: HEAD / KENTModel: CUV-10 (KMV 10)Year: 1999Robust CNC vertical machining center, Meehanite cast iron construction, suitable for machining single parts and small to medium series.Numerical control: FANUC OMDStructure: Meehanite cast ironTurcite B-coated slidesRigid threadPortable electronic crankFull protective guardSprinkler systemWork light and end-of-cycle lampToolboxRaces:X: 1,020 mmY: 510 mmZ: 510 mmDistance between spindle nose and table: 105 to 740 mmTable: Dimensions: 1,200 × 600 mmT-slots: 18 mm – 3 groovesMax. permissible load: 1,000 kgSpindle:Speed: 30 – 7,500 rpmTransmission: ZF gearbox – 2 rangesCone: BT 40Engine power: 11 kWFeeds:Fast feed (X,Y,Z): 24 m/minWorking feed: 1 – 10,000 mm/min Toolchanger: Capacity: 20 toolsMax. tool weight: 6 kgBidirectional selectionMachine dimensions: 2,880 × 2,420 × 2,980 mmFloor space required: 4,000 × 3,000 mmNet we ...