Vertical Processing Centers used for sale (243)

The machine is in good technical condition, after prior agreement it is possible to test it. It has a modified system to TNC640, touch screen. Without tools and without water management,

Auction-ID: A1-49365-3

Key data: 830 mm, 530 mm, 580 mm

Manufacturer: ROMI Model: D 800 Year: 2014 Condition: Used Stock number: 9342 Control system: Fanuc 0i-MD Hours: 18832 h Work table length: 914 mm Work table width: 500 mm Spindle drive power: 22.4 kW Number of axes: 4 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 830 mm Y-axis travel: 530 mm Travel travel Z-axis: 580 mm Machine weight: 5800 kg Equipments: Chip conveyor High-pressure central cooling (30 bar) 4. Axle ROMI MGR 230 v 4.0 Renishaw OMP 40-2 Workpiece Probes Aspira OMC 1200 Suction Tool holders and cutting tools (22 pieces in total)

table: 1270 x 510 mm,traverses: 1000 x 510 x 520 mm,spindle speed: 25 - 4000 rpm,spindle motor power: 11/7.5 kW,tool magazine: ATC20, Auction-ID: A7-49398-9

Control Winmax Travel X/Y/Z: 1,067 x 610 x 610 mm Spindle speed 12,000 min-1 Tool magazine for 30 Wkz., SK 40 IKZ Chip conveyor Detachable handwheel

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-49302-3000

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9330 Type: MCV 1270 R Producer: MAS Generated: Parameters: Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine height: 3330 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11800 t Equipment: Grips Vise

Technical data Manufacturer: HURCO Model: VMX42i Date of manufacture: 2018/3/6 Spindle speed: 12,000 rpm Machine mass according to nameplate: 6,450 kg Travel X/Y/Z: 1,067 / 610 / 610 mm (Source: Online research) Table size: 1,270 x 610 mm (Source: Online research) Max. table load: 1,750 kg (Source: Online research) Spindle power: 18 kW (Source: online research) Tool holder: ISO 40 (Source: Online Research) Tool changer: 30 places (Source: Online Research) Control: HURCO MAX5 / WinMax with double screen (Source: Online research) Configuration 3-axis CNC vertical machining center with 2 machine vices, chip conveyor and separate cooling/tempering unit. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Note information researched to the best of my knowledge and belief. No guarantee is given for completeness and  ...

Key data: 760 mm, 510 mm, 570 mm

Inv. Num. : 9328 Type: ACE VC 500 Producer: DAEWOO Created: 2005 Parameters: Control System: FANUC Series 21i-MB Work table length: 860 mm Work table width: 560 mm Maximum table load (even): 300 kg Spindle drive power: 15 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 510 mm Travel Z axis: 570 mm

  CNC Siemens 840D   Table size 1200 x 800 mm   Movement X 1020 mm Y travel 610 mm Feed Z 620 mm   Centre of spindle to column 670 mm Spindle to table 140 - 760 mm   Column face to table centre 365 - 975 mm   Fast feed of XYZ axis 43 M/min.   Cutting feeds 1 - 10000 mm/min.   Maximum table load 800 Kg   Spindle speed 150 - 12000 rpm   Maximum spindle motor power: 16Kw   Spindle motor duty cycle: 12 kW   BT 40 spindle taper   Tool magazine capacity 24 stations Arm type   Tool change time between tools 2.5 s   Tool change time from chip to chip 3.5 s   Maximum tool diameter 100 mm   Maximum tool weight 8 kg   Coolant capacity 280 l   Plan area W x D x H 2650 x 2750 x 2900   Chip conveyor   High pressure coolant through spindle Auction-ID: A7-49260-1

The machine is in good technical condition; it can be tested by prior arrangement.

CNC VERTICAL MACHINING CENTRE Inv. No.13.164M1 Make DMG Model 63V Serial number 28850011162 Control Heidenhain TNC426M Year 2000 X-travel 630 mm Y-travel 500 mm Z-travel 500 mm Table size 500 x 800 mm Spindle taper SK 40 R.P.M. 8000 kW 13 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-49027-54

Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor

Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-49302-1008

Control Siemens Sinumerik 828D Travel X/Y/Z: 1020 x 560 x 510 mm Spindle speed 8000 min-1 Tool magazine for 24 Wkzg. SK 40 IKZ Chip conveyor

Table Dimensions (mm): 610mm x 370mm X-Travel (mm): 560mm Y-Travel (mm): 400mm Z-Travel (mm): 500mm Number Of Tools In Magazine: 10 Spindle Speed Range: 5 - 8000 rpm Distance Between Spindle & Table (Verticl): 100mm - 600mm Spindle Taper: BT40 Cutting Feed rate: 1 - 20000mm Rapid Traverse Range X,Y,Z: 20M/pm Table load max: 300Kgs Main Drive Power: 15 hp Control: Siemens 802 Foot print W x D x H: 2000mm x 2060mm x 2530mm Weight: 3100Kgs Auction-ID: A7-49260-2

Control Brother B-00 Travel X/Y/Z: 700 x 400 x 300 mm Spindle speed: 10,000 min-1 Tool magazine for 21 Wkz., BT 30 4. Axis W&R 3D Probes OP 40 Manual handwheel Chip conveyor Chip wagon Vacuum unit Various clamping devices and tool holders

Condition:good Table clamping surface 800x500 mm X-axis travel 630 mm Y-axis travel 500 mm Z-axis travel 500 mm Spindle speed 10 - 10000 /min. Number of controlled axes 3 Central cooling no Spindle clamping taper SK 40. Max. table load 500 kg 29Heb8Zqm Total power consumption 33 kVA Sinumerik control system. sn: 28850021282 Auction-ID: A7-49260-3

Key data: 750 mm, 500 mm, 500 mm

Inv. Num. : 9301 Type: MCV 750 SPEED Producer: MAS Created: 2009 Parameters: Control system: Heidenhain TNC 530 Work table length: 1000 mm Work table width: 640 mm Maximum table load (uniform): 650 kg Tool magazine: 20 pieces Maximum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2700 mm Machine length: 3700 mm Machine width: 2200 mm Machine weight: 5350 kg Equipment: 4. Axis Workpiece Probe Tool probe 2024: Replacement of the X and Y axes (including new screws)

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-49056-157

Key data: 1300 mm, 635 mm, 610 mm

Inv. Num. : 9296 Type: MCV-1300iS Producer: Leadwell Created: 2015 Parameters: Control System: FANUC Series Oi-MD Hours: 7088 h Work table length: 1420 mm Work table width: 610 mm Maximum table load (even): 1000 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 1300 mm Y-axis travel: 635 mm Travel travel Z-axis: 610 mm Cone: ISO 50 Number of all tools: 24 pieces Machine height: 2721 mm Machine length: 3840 mm Machine width: 2200 mm Machine weight: 7000 kg Equipment: 4. Axis Workpiece probes

CNC VERTICAL MACHINING CENTRE Inv. No.13.017M1 Make EUMACH Model MC1300P Control Heidenhain 360 Serialnumber E3045 X-travel 1350 mm Y-travel 610 mm Z-travel 610+160 mm Table size 1500 x 700 mm Max loading weight 1500 kg Spindle taper ISO 50 R.P.M. 60 – 4500 Machine weight 9000 kg Dimensions 4400 x 3076 x 3000 mm kW 15 Volts 400 Cycles 50 Including: Automatic lubrication. Telescopic way covers. ATC 32 positions Auction-ID: A1-49027-36

Control Heidenhain iTNC 530 Travel X/Y/Z: 2200 x 560 x 720 mm Spindle speed 18,000 min-1 Clamping area 2600 x 600 mm Max. table load 2200 kg Swivel head IKZ 25 bar Tool magazine for 30 Wkz, SK 40 Choice of C- or A-axis Measuring Probe Heidenhain TS 640 Chip conveyor Paper Belt Filter

Make BURGSMÜLLER Model VIWM 800-CNC Mach. No. 2000/4533 Year of Manufacture 7/2000 Control SIEMENS SINUMERIK 840D Chuck Dia. ø 500 mm Max. Dia. ø 840 mm Spindle Bore 70 mm Max. Height over Bed 415 mm Max. Height over Cross Slide 185 mm R.P.M. Stepless 0 - 100 kW 8,5 Max. Load 700 kg Milling Spindle: kW 12 Max. Load 800 – 3,200 200-800 Taper QSP 50/2500 IK Including: Tool Changer 10 pos. Chip Conveyor Auction-ID: A1-49027-6

Key data: 762 mm, 508 mm, 508 mm

Inv. Num. : 9268 Type: VF-2SSYT Producer: HAAS Created: 2021 Parameters: Switch-on hours: 13517 h Operating hours: 6225 h Work table length: 914 mm Work table width: 457 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Spindle power: 22.4 kW Cone: SK 40 Number of Stacking Positions: 31 pieces Machine weight: 3450 kg Equipment: Chip conveyor Renishaw tool probe Renishaw workpiece probe High-pressure tool cooling through the spindle center Extraction system from the machine cover

CNC VERTICAL MACHINING CENTRE Inv. No. 13.039M1 Make MAZAK Model AJV60/80 Control MAZATROL M-32 Year of manufacture 1989 Pallet size 1.250 x 2240 mm X-travel (longitudinal) 2.000 mm Y-travel (cross) 1,400 mm Z-travel (vertical) 508 mm Spindle ISO 50 TOOL CAT 50 Workpiece weight 15 kg R.P.M. 22 – 3.150 kW Volts Cycles Including: Chip conveyor spiral on-side of the table 40 Tool Magazine Auction-ID: A1-49027-8

Control Fanuc OM Travel distances X/Y/Z: 450 x 300 x 400 mm Table size 600 x 300 mm Spindle speed 8,000 min-1 Tool magazine for 16 Wkzg. SK 30

Number of tools 240 Tool holder BT 50 \"BIG PLUS\" Tool coding space-coded Tool breakage monitoring MOP Number of pallets 6 pallets Pallet size 630 x 630 mm X-travel 1000 mm Y-travel 900 mm Z-travel 1000 mm NC – round table division 0.001 ° Gear stages 2 R.P.M. 50 – 6000 Torque 606 Nm Rapid traverse 60 m/min Zero point determination Renishaw MP10 Zero point clamping system System 3R kW 30/22 Auction-ID: A1-49027-2

Key data: 1000 mm, 800 mm, 600 mm

Inv. Num. : 9265 Type: MCV 1210 Producer: TAJMAC-ZPS Created: 2014 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 22746 h Operating hours: 21850 h Work table length: 1200 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Number of stacking positions: 30 Maximum spindle speed: 15000 1/min X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 600 mm Cone: SK 40 Machine weight: 11500 kg Equipment: Technical documentation Chip conveyor Blum Mini NT F800 Tool Probe Renishaw Radio Receiver High Pressure Cooling ChipBlaster D30-70

Make MIKRON Model VCE750 X Travel (longitudinal) 760 mm Y Travel (cross) 400 mm Z Travel (vertical) 500 mm Taper ISO 40 Table 360 x 910 mm Load 340 kg R.P.M. 10 – 7,500 KW 7.5 Cycles 50 Volts 400 A.T.C. 20 pos. Auction-ID: A1-49027-17

Key data: 800 mm, 540 mm, 560 mm

Inv. Num. : 9243 Type: CFV 800 Producer: Cincinnati Generated: Parameters: Control system: Heidenhain iTNC 530 Work table length: 950 mm Work table width: 520 mm Maximum table load (uniform): 400 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 540 mm Travel Z-axis: 560 mm

CNC VERTICAL MACHINING CENTRE Inv. No.13.018M1 Make EUMACH Model MC-800P Control Heidenhain TNC360 Serialnumber 8056 X-travel 760 mm Y-travel 460 mm Z-travel 460 mm Table size 900 x 410 mm Spindle taper ISO 40 R.P.M. 0 – 8.000 kW 15 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-49027-37

The machine is in good technical condition, testing is possible by prior arrangement. Chip screw conveyor Programmable coolant nozzle Power failure detection module Remote control via rotary knob with color LCD display Direct thread cutting Spindle 15,000 rpm, ISO 40 taper, 30 hp (22.4 kW) vector drive, direct "inline" drive Renishaw intuitive wireless probe system 2x clamping vice 30x tool holder

CNC Control: Siemens 828D ShopMillCourses X/Y/Z: 1220 / 600 / 610 mmTotal power: 10 / 14 kWSpindle speed: 8,000 rpmSpindle taper: SK40Tool magazine: 20 positionsEquipment: Chip conveyor, coolant, technical documentationPower supply: 400 V – 50 HzManufacturer: HuronYear: 2012Serial number: M02741Estimated dimensions (mm): 3500 x 2800 x 3200Weight (kg): 10000 Auction-ID: A1-49171-10

The machine is in good technical condition, after prior agreement it is possible to test it. 25 micron filter, chip conveyor belt, cooling through the spindle center, pressure 300 psi, wireless probe for tools and workpieces, side tool changer, ISO 40 taper, 30+1 tools, synchronized thread cutting, rotary gauge, 1x clamping vice, 20x tool holders

CNC Control: Siemens 828DTable dimensions: 750 x 400 mmX/Y/Z strokes: 600 / 400 / 450 mmSpindle speed: 10,000 rpmSpindle power: 7.5 / 15 kWSpindle nose: SK40 / SA40Tool magazine: 24 positionsMax. tool diameter: 80 mmMax. tool length: 280 mmMax. tool weight: 8 kg Fastfeed: 48 m/minPositioning accuracy: ±0.003/300 mmRepeatability: ±0.003 mmPower supply: 400 V, three-phase, 50/60 HzOptions: Rigid tapping, Ethernet/USB, 20 bar IKZ spindle center coolant, electronic crank, spindle coolerYear: 2018Manufacturer: PriminerSerial No.: PR8318Dimensions (mm): 2530 x 1800 x 2350Weight (kg) : 3500 Auction-ID: A1-49171-8

The machine is in good technical condition, testing is possible after prior agreement. 5-axis HSC machining center designed mainly for the production of molds, models, aircraft parts and large precision parts. Travels X/Y/Z 2700 × 1100 × 1400 mm Table 2000 × 2000 mm Table load capacity 12,000–15,000 kg Spindle speed up to 24,000 rpm Spindle power 34–45 kW Control FIDIA C20 Tool magazine 42–84 positions Clamping HSK 63A (some configurations HSK 100) Rapid traverses X 50 m/min, Y 40 m/min, Z 30 m/min Machine weight approx. 38–38.5 t Positioning accuracy X 0.006 mm, Y 0.005 mm, Z 0.004 mm

Machine number: 10394Operating voltage: 415 VFrequency: 50 HzRated current: 29 AConnection: 21 kVAControl: YASNACTool holder: SK 40Table dimensions: 750 x 380 mmwith three groovesTravel X-axis: approx. 500 mmTravel Y-axis: approx. 500 mmTravel Z-axis: approx. 400 mmThe machine is equipped with a tool changer including the tool holders located in the changer, also transformer and two chip conveyorsSpindle speed: 60 - 8000 rpmReference: Hanon - Lot 45 Auction-ID: A7-49056-19

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9177 Type: VCI-D 1270 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 600 mm Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine weight: 10500 kg Equipment: Accessories

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 k Travel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y-axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D Probe Reference: Schönichen - Lot 25 Auction-ID: A7-49056-158

Key data: 1000 mm, 600 mm, 650 mm

Inv. Num. : 9176 Type: VCI-Q 1000 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel travel Z-axis: 650 mm Machine weight: 5500 kg Equipment: Accessories

X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Tool holder: SK 40 | Speed range: 20–4,500 rpm | Features/Accessories: Swivel rotary table, documentation Auction-ID: A7-48995-4

Key data: 800 mm, 590 mm, 480 mm

Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories

Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

Key data: 4200 mm, 2425 mm, 1000 mm

Inv. Num. : 9140 Type: FVC 160/4 CNC Producer: TYC Created: 2014 Parameters: Work table length: 4000 mm Work table width: 1600 mm Maximum table load (uniform): 11000 kg X-axis travel: 4200 mm Y-axis travel: 2425 mm Travel Z axis: 1000 mm Machine weight: 50000 kg Equipment: Sempuco Head KFU-NC3/45/005X