boring mills and machining centers used for sale (3,291)

Thread cutting: M 3 - M 16 Speed: 300 rpm Working radius: 200 - 1900 mm Air requirement/pressure 950 l/min 6 - 7 bar Construction parallel arm: Stable arm structure made of hard aluminium profile (38 x 29) Adapter recording TCS 2 B Weight: 27 kg incl. 6 slip couplings

Thread cutting of M 3 - M 12 - Speed: 400 rpm. Air demand/pressure: 750 l/min. 6-7 bar Working range (extension) 300 - 1900 mm Construction parallel arm: Stable arm structure made of hard aluminium profile (38 x 29) Weight: 23 kg Adapter recording: TCS 1B incl. 6 TCS1B safety slip couplings of your choice

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Control buttons of the electric power supply are torn. Auction-ID: A1-41996-103

Table size 400 x 400 mm Maximum machinable workpiece size Ø630 x 920 mm Tool magazine 60 places Maximum tool size Ø95 x 450 mm - 5 kg (Ø170 mm without adjacent tools) High spindle nose pressure 70 bar Tool minimum lubrication Auto power on Tool Effort Monitoring Robot connection interface Continuous table Tool changing system with angle heads equipped with tool holder cones and 2 GERARDI angle heads SEE PDF FOR MORE MACHINE FEATURES Auction-ID: A7-46824-1

Supply voltage: 380 V Phase: 3P Frequency: 50 Hz Rated capacity: 46 kVA Full load current: 70 A Largest motor rate: 129/10 A Interrupt capacity: 15 kA Diagram No.: W6000-270/-247-6 Serial number: 0317 Made in Japan by OKUMA Corporation Maximum machining capacity: 1000 × 800 × 810 mm Maximum workpiece size: 939.37 × 810 × 810 mm X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 810 mm Spindle center to table: 200–1010 mm Spindle end to table center: 87.8–976 mm Table pallet size: 630 × 630 mm Index positions: 360 positions Maximum table load: 1200 kg Spindle speed range: 50–10000 rpm Spindle taper: NT No.50 Spindle diameter: Ø110 mm Rapid feedrate (X/Y/Z): 30000 mm/min Jog feedrate: 1–20000 mm/min 4-axis horizontal machining center Auction-ID: A7-46053-25

With clamp, disassembly is the responsibility of the buyer Auction-ID: A1-46547-345

Control: Siemens Sinumerik 840D,Filter system: KNOLL KF 400, year of manufacture 2018, chip conveyor Auction-ID: A7-46802-1

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-46416-308

Buyer is responsible for proper and safe dismantling on the collection day Auction-ID: A1-46547-202

Equipped with: emergency stop Auction-ID: A1-41996-89

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-46416-309

On and including steel base, total size 700x650x1900mm. Auction-ID: A1-46553-106

Drilling capacity: M3-M20. Table size: 2000x1000 Auction-ID: A1-41996-104

Make: Dugard Type: CNC Vertical Machining Center Model: Eagle 1000 VMC Serial number: MC97BF06 Control: FANUC Series 0i-MC Technical data: - X / Y / Z travel: approx. 1000 mm / 500 mm / 500 mm (typical for model class) - Spindle speed: 8000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: 5–6 kg/cm² Equipment: - Vertical spindle - Tool holders included (side mounted rack) - Coolant system - Manual pulse generator (handwheel) - Enclosed working area with sliding door Control panel: - Full FANUC keyboard and display - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-48

Type: CNC Vertical Machining CenterBrand: EMSIL TechtransModel: DMC2100HControl: FANUC Series 18i-MBMachine Type: Super Vertical Machining CenterAxes: 3-axis (X / Y / Z)Equipment:- Enclosed working area with sliding doors- Large T-slot worktable- Automatic tool interface (tool holder included)- CNC control panel with screen and full keypad- Emergency stop- Coolant system with adjustable nozzles- Electrical cabinet integrated- Status signal tower (stack light)Displayed Data (at time of inspection):Run time: approx. 19,568 hPart count: 84,933Condition: UsedRemarks: Alarm displayed (pressure low); machine not tested; sold as seen Auction-ID: A7-45993-78

Machine type: CNC Vertical Machining Center Manufacturer: Tongtai Model: TMV-720A Control: Heidenhain CNC control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 900 x 400 mm Spindle: Vertical spindle Tool holder: SK40 (visual assumption) Tool changer: Yes, side-mounted tool rack Number of tool holders: approx. 20+ pcs included Coolant system: Yes, internal coolant nozzles Chip management: Chip conveyor installed Coolant unit: External filtration unit (Granch Filtration) Control panel: Heidenhain with manual pulse generator (MPG) Emergency stop: Yes Status light: Yes Accessories: Tool holders, coolant system, filtration unit Remarks: Machine in used condition, signs of wear and coolant residues visible. Control boots and initializes. Includes multiple tool holders and external coolant filtration system. Own mass: approx. 5,500 kg Dimensions (LxWxH): approx. 2,500 ...

Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV1200 Year: 2010 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 1,200 mm - Y-axis travel: approx. 600 mm - Z-axis travel: approx. 600 mm - Table size: approx. 1,300 x 600 mm - Spindle speed: up to approx. 8,000–10,000 rpm (typical for model) - Power: 12 kVA (according to plate) Equipment: - Fully enclosed machining cabin with double doors - Heidenhain control panel with screen & keyboard - Electronic handwheel - Tool holders rack (side mounted) - Chip conveyor - Coolant system - Working light Application: - CNC milling and machining of metal components - Toolmaking and precision part production Condition: Used Auction-ID: A7-45993-42

Machine number: 22498Drilling depth: up to 180 mmSpeed: from 2 5 to 3000 rpmTable dimensions: 400 x 300 mmwith two groovesTraining workshop part 2 - Lot 11 Auction-ID: A7-46763-251

Auction-ID: A1-46604-431

Serial number: 508219Table dimensions: approx. 330 x 260 mm Auction-ID: A7-46287-176

Manufacturer: HURONYear: 2001Type: 4-axis CNC vertical machining centerNumerical control: Siemens Sinumerik 840DStrokes: X 700 mm / Y 600 mm / Z 450 mmTable: 800 × 600 mm – max. load 500 kg4th axis: Integrated rotary tableSpindle: HSK63-A – SKF – 24,000 rpm – 18 kW (spindle overhauled in 2024, approx. 1,000 h)Tool magazine: 20 stationsDimensions (mm): 3000 × 2100 × 3300Weight (kg): 8000Remarks: High-speed machining center with 4th axis. Machine used, functional. Auction-ID: A1-46647-215

Year: 1998Serial No.: 458-66Type/Function: 4-Axis Vertical CNC Machining CenterConfiguration: 2 Pallets, 2 × 4th Axis TsudakomaNumerical Control: SIEMENSIncluded Equipment: KNOLL Filter Unit, Chip Conveyor Auction-ID: A1-46647-270

Manufacturer: DMG (Deckel Maho Gildemeister)Year: 2006Type: CNC Vertical Machining CenterNumerical Control: Heidenhain TNC 530Strokes: X 635 mm / Y 510 mm / Z 460 mmSpindle: 12,000 rpmTool magazine: 32 positionsSpindle center coolant: 20 barFiltration: Cartridge filtrationTooling: No tooling supplied with the machineWeight (kg): approx. 6000Notes: Multi-purpose CNC vertical machining center. Serial number included in the description. Auction-ID: A1-46647-216

In pvc case Auction-ID: A1-46604-49

IXION TL 500 SVA Deep Hole Drilling Machine Manufacturer: IXION Model: TL 500 SVA Year of Manufacture: 1985 Serial Number: 113178 Origin: Germany Drilling Capabilities: Drilling diameter: 1.5 – 18 mm Advertised drilling depth: 600 mm Table and movements: Fixed table: 700 × 1,350 mm Circular tabletop: 1,000 × 500 mm Longitudinal stroke: 600 mm Stroke in the direction of drilling: 400 mm Swivel table: 180° Drilling unit: Vertical carriage stroke: 250 mm Unit orientation: ±15° Spindle Taper: CM3 Spindle and control: Number of speeds: 8 Speed range: 240 – 2,400 rpm CNC Control: Bosch Alpha Digital display: Heidenhain 3-axis Power and Size: Engine power: 1.0 / 1.6 kW Installed power: 10 kVA Dimensions (L × W × H): 2,000 × 1,500 × 1,800 mm Weight: approx. 1,350 kg Auction-ID: A1-46647-265

2 PCS There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46023-42

Auction-ID: A1-46604-80

Speed: from 250 to 2000 rpmTable dimensions: 460 x 360 mmwith two groovesReference: Pieper - Lot 62 Auction-ID: A7-46763-25