boring mills and machining centers used for sale (3,261)

bore capacity in steel (diameter): 45 mmthroat: 350 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 560 mmtotal power requirement: 3,4 kWweight: 950 kgdimensions: 1200 x 800 x 2300 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED ...

bore capacity in steel (diameter): 28 mmthroat: 250 mmbore stroke: 130 mmmorse taper: 3 MKtable:: 380 x 380 mmturning speeds: 75 - 3200 U/minthread: M16 ST60column diameter: 98 mmengine output: 1,1 kWdimensions: 800 x 500 x 2000 mmweight: 210 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55 mmarm length: 2500 mmworkpiece height max.: - mmtotal power requirement: 8 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 1 x 3 mRadial drilling machine MK 5Spindle holder MK 5Speed range 30 - 1500 min-1Feed rates 0.05 - 0.6 mm/revSpace requirement approx. 3.7 x 1 x 3 mWeight approx. 5 tonnes (estimated)Working range: MK 5 x 2500Drive: 3.7 / 6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 250 mmbore stroke: 130 mmmorse taper: 3 MKtable:: 380 x 380 mmturning speeds: 75 - 3000 U/minengine output: 1,1 kWcolumn diameter: 98 mmthread: M16 ST60dimensions: 700 x 450 x 1500 mmweight: 200 kg- Height adjustable and angle adjustable table- Movable work table- Prepared for cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 254 mmbore stroke: 120 mm: 4 Motor output: 9 speeds: 120 - 1810 U/mincolumn diameter: 92 mmtable surface area: 475 x 425 mmtotal power requirement: 1,1 kWdimensions: 915 x 450 x 1705 mmweight: ca. 135 kgColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by  ...

bore capacity in steel (diameter): 30 mmthroat: 270 mmbore stroke: 125 mm: 4 Motor output: 9 speeds: 70 - 2800 U/minColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with safety switch Thick-wa ...

bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M36 throat: 400 mmbore stroke: 230 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/Uspindle turning speed range: 54 - 1032 U/mintransmission ratio: 12 Stufencolumn diameter: 200 mmtable surface area: 550 x 550 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,72 tdimensions of the machine ca.: 2,6 x 0,6 x 1,2 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection ...

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 170 mm: 4 speeds: 70 - 1400 U/mintable-size: 600 x 450 mmtotal power requirement: 3,0 kWweight: 350 kgdimensions: 1200 x 800 x 2150 mmColumn drilling machine OPTIdrill DP 33V promotion set / 3020680SETWith an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slotswith all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LE ...

Control: Mitsubishi Area of application: Production of chassis components made of cast iron in batches Nodular graphite in one clamping position, production of large series or largerones. Quantities, current cycle time

spindle cone: MK 1 turning speeds: 200 - 3000 U/mintable-size: 300 x 220 mmtotal power requirement: 520 Wweight of the machine ca.: 200 kgdimensions of the machine ca.: 8004001800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 460 mmz-travel: 560 mmcontrol: Sinumerik 840 D PL - Shop total power requirement: 19/28 kWweight of the machine ca.: 13 tdimensions of the machine ca.: 12 Lademeter mNo. 4100Bar machining center 5 axes DECKEL MAHO DMC 60 SWorking area: 760 x 460 x 560Drive: 19/28 kWControl: Sinumerik 840 D - Powerline ShopmillNC swivel milling head (B-axis) -120/+30°60-fold tool magazine with taper cleaningNC rotary axis (A-axis) with collet chuck Spanntop 65,Tailstock, hydraulically lowerable,NC bar loader 1100 mmWorkpiece pick-up device with discharge beltProduction package with coolant tank 600 l,INTERLIT SKA 200-760 - IKZ 40 bar through spindle centerChip conveyor, Rotating inspection windowBLUM tool measuring systemOil mist extractionOperating mode 4HSK-A 63 spindle Speed range up to 18,000 min-1Feed rates up to 50 m/minRapid traverse 50 m/minSpace requirement approx. 5 x  ...

x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtable-size: 1080x580 mmspindle taper: SK40 spindle turning speed range: 10000 U/mintool change unit: 30 weight of the machine ca.: 10 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmbore capacity in cast iron (diameter): 60 mmthreading cutting capacity:: M42 throat: 360 mmbore stroke: 200 mmspindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4 mm/Uspindle turning speed range: 190 - 1900 U/mincolumn diameter: 175 mmtable surface area: 550 x 550 mmtotal power requirement: 4 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 2,2 x 0,7 x 1,3 m- large stepless speed range in 3 stages- mechanical speed adjustment with hand lever (model V)- electronic speed adjustment with frequency converter (model VE)- Front digital speed display- Gear lubrication by automatic oil pump VE”- Machine base plate with integrated coolant device- Machine light- MGI rotating and tilting table- Advance and automatic retraction with electromagnetic clutch- Front hand wheel for fine adjustment of the manual feed- Scale with adjustable dr ...

bore capacity in steel (diameter): 34 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron (diameter): 40 mmthread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/mincolumn diameter: 125 mmautomatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mmDrive: Keilriemen total power requirement: 3 kWweight of the machine ca.: 360 kgdimensions of the machine ca.: 2,3 x 0,6x 1,1 m- Drilling machine of circular column feed automaticmechanical- Drive by electronic wide V-belt- Spindle taper: CM 4- Stepless speed adjustment with frequency converter- Potentiometer for speed adjustment- digital speed display- Automatic feed reversal when threading- Scale with adjustable drilling depth - automatic tool ejector- Push button for EMERGENCY STOP switch for right/left rotation- Electronic control integrated in the drill head - integrated coolant system- Machine light - hei ...

Upper support, cross support, cross table, cross slide table-Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL-Table surface: mm-Travel: x 350 mm/y 220 mm-Dimensions: 1380/1000/H800 mm-Weight: 800 kg

Control unit, control panel, control panel, control unit, foot switch, safety foot switch-Manufacturer: Steute, 2-pedal safety foot switch-Type: C S2 OS/OS-Metal housing: with protective cover, die-cast aluminum-Dimensions: 275/280/H130 mm-Weight: 2.6 kg

Drill, drill press, pillar drill, pillar drill-Manufacturer: Gosmeta, pillar drilling machine type B-30N-Motor: 1.1kw-Speeds: 110 - 920 rpm, 5 levels-Table size: Ø 330 mm, travel 510 mm-Spindle mount: MK3-Spindle stroke: 125 mm-Projection: 300 mm-Columns Ø: 120 mm-Dimensions: 490/750/H1850 mm-Weight: 282 kg

Tool changer chain, chain magazine, tool changing system, tool magazine-Spare part comes: from a machining center BJM type ALBZ-145-Tool change system-CUT changer-RIG changer: RIG 06-12-P003 VX VCP-Drive motors: MGM-Dimensions: 1400/950/H830 mm-Weight: 380 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling-Module: M4 (large display)-for: Condair CP2-Type: M4-Weight: 0.3 kg

: 1980 tool taper: MK : 205 - 1450 m/min.boring range:: 3 - 40 mm Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear-Number: max. 3x drill-Admission: M8-right/left: rotating alternately-Distance drill: 25 mm, offset (see photo)-Number: 3 drill heads available-Price: per piece-Dimensions: 90/85/H70 mm-Weight: 1.6 kg/piece

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mprecise bench drill:- Large speed range- Programmable thread cutting- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

bore capacity in steel (diameter): 50 mmthroat: 360 mmbore stroke: 150 mmspindle turning speed range: 120 - 3000 U/minspindle taper: SK 40 : 650 mm: 320 mmvertical adjustment: 500 mmtable surface area: 1000 x 300 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 1,25 x 1.5 x 2,3 mNew Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs.Domestic equipments:• automatic feed in X-axis• 3-axis digital display• motorized Z-axis• Feed in quill• Left-right-run high• tapping attachment• Gear head swiveling• Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja vice: 1 quill stroke: ja : : 2.000 mmweight of the machine ca.: 790 kgstrong material: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine-spindle taper: MK2-Motor: 1.2/0.85 kW-Table size: 1175 x 355 mm-Projection: 255 mm-Speeds: 125 - 1400 rpm-Spindle stroke: 125 mm-Dimensions: 1345/960/H1900 mm-Weight: 1212 kg

Tool setting device, tool presetting device, milling cutter setting device-Presetting device for: milling tools-maximum hob diameter: 500 mm-maximum height of the milling cutter: 500 mm-Dimensions: 800/400/H1600 mm-Weight: 242 kg

bore capacity in steel (diameter): 14 /15 mmthroat: 180 mmbore stroke: 70 mmturning speeds: 420 - 2100 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 0,5/1,0 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mTable Drilling Machine with:variable feedTapping function.depth displayCoolant systemBelt-drivespindle protectionmachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.