boring mills and machining centers used for sale (3,266)

Control Heidenhain TNC 426 Mach.no. 11648 Table 1,600 x 1,250 mm Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 2,000 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,050 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Machine weight 26,3 ton

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton

Key data: 102 mm, 1600 mm, 1250 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50

Key data: 102 mm, 1600 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310

Key data: 102 mm, 1530 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout

Inv. Num. : 7911 Type: FZ 12 WM Producer: Chiron Created: 2011 Parameters: Control system: Fanuc Series 21iM Switch-on hours: 94645 h Hours: 45953 h Work table length: 850 mm Work table width: 350 mm X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 425 mm Machine height: 2600 mm Machine length: 2800 mm Machine width: 1800 mm Equipment: Grips

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

Gillardon Bench Drill GT 16 - MK2 recording - Stepless speed Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

x-travel: 3000 mmy-travel: 800 mmz-travel: 1100 mmtotal power requirement: kWweight of the machine ca.: 15 trequired space: 4x6x3.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1100 mmz-travel: 750 mmtotal power requirement: 71 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment Main switch Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with CEE plug 3-year warranty for single-shift operation Specifications Continuous/normal drilling capacity (mm) 23/25 (in E335/ST60) Tapping capacity (pitch dependent) M16x1 Spindle MK III Drilling depth (mm) 115 Projection (mm) 260 Column diameter (mm) 110 Usable work surface (W x L) (mm) 420 x 340 T-slot size (arm), spacing (mm), dimension width (mm)Quantity 2, 125, 13/26 Speed display: digital Drilling depth display: digital Drilling depth stop: quickly adjustable stop ring Fee ...

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 4,6 x 2,4 x 2,7 mBrand Deckel MahoMachine no F631Type DMC 80 U hi-dynCNC Brand SiemensCNC Type 840DYear of make 2003Table length 800 mmTable width 630 mmNumber of pallets 2X 800 mmY 700 mmZ 600 mmSpindle taper HSK-A 100Tool changer 60Maximum pallet load 800 kgNutrition 20 - 1500 mm/minChip transport Machine size 4.600 x 2.400 x 2.700 mmMachine weight 10.500 kgTool magazine positions: 60Heidenhain TS 642The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmControl: Siemens 840D total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3,4 x 2,4 x 2,8 mBrand DMG Mori SeikiMachine no F666Type DMC 635 V EcolineControl Siemens 840DYear of make 2012Table length 790 mmTable width 560 mmX 635 mmY 510 mmZ 460 mmSpindle taper SK40Speed maximum 12.000 RPMChip transport Machine size 3.400 x 2.400 x 2.800 mmMachine weight 3.950 kgTool magazine positions: 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmControl: HEIDENHAIN MillPlus IT workpiece height max.: 1.330 mmtool length - max.: 450 mmmax. workpiece diameter: 800 mmNc rotary table: : surface area: Ø 800 x 630 mm: 0,001 °workpiece weight max.: 1.200 kgWidth of t-slots: 5 x Gr.14 Distance between t-slots: 100 mmcenter hole: Ø50H6 mmUniversal Milling Head: - B-axis: stufenlos 180 °resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1tool taper: HSK-63 DIN 69893 Form A feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 60.000 mm/minrapid in X/Y/Z: 60.000 mm/mintool magazine: - Number of tool places: 120 Stworkpiece length: 450 mmweight of tools max.: 15 kgvoltage: 3x 400 Vconnected load: 64 kVAcontrol voltage: 24 VFuse: 100 Atotal connected load: 64 KVAOverall size: - Space requirement: ca. 4,5 x 4,6 x 3,4 mweight of the machine ca.: 17.000 kg•Eq ...

x-travel: 1.250 mmy-travel: 880 mmz-travel: 800 mmControl: HEIDENHAIN iTNC530 workpiece height max.: 1.230 mmmax. workpiece diameter: 1.250 mmNc rotary table: : numbers of pallets: 2 size of pallet: 1.000 x 800 mm: Ø 1.100 mmmax. table load: 1.000 kgc-axis: 360 x 0,001 °Universal Milling Head: - B-axis: + 180 / -7 ° - stufenlos resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1tool taper: HSK-63 DIN 69893 Form A feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/minrapid in X/Y/Z: 40.000 mm/mintool magazine: - Number of tool places: 60 Sttool taper: HSK-A63 voltage: 3x 400 Vconnected load: 58 kVAOverall size: - Space requirement: ca. 5,5 x 4,5 x 3,2 mweight of the machine ca.: 15.000 kg5-Axis Universal milling machine in a very sturdy design with NC rotary table, tool magazine and pallet changer, NC swivelling milling head (B-head) with  ...

x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC530 Nc rotary table: : surface area: Ø 1.500 x 1.250 mm: 0,001 °workpiece weight max.: 4.000 kgUniversal Milling Head: - B-axis: stufenlos + 180 / - 7 °resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/minrapid in X/Y/Z: 60.000 mm/mintool magazine: - Number of tool places: 60 Sttool taper: HSK-63 DIN 69893 Form A voltage: 3 x 400 Voperating frequency: 50 HzOverall size: - Space requirement: ca. 8,8 x 8,8 x 3,5 mweight of the machine ca.: 35.000 kgVersatile 5-axis universal machining center with NC – Rotary table, tool magazine and large loading door at the front.• NC-swivelling milling head with 18,000 rpm motor spindle for 5 -axis simultaneous machining• 3D CNC - -Control HEIDENHAIN iTNC530•  ...

Double-spindle machining centre in 5-axis design Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle spacing 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions Tool holder HSK 63 CNC control Siemens 840D 1 x Tool breakage detection 2 x tension bridge support H75 mm 2 x tension bridges 5th axle Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x Drill Head Indexing 2 x Tool Planing System Control 2 x Upgrade Kit Torsion Compensation A/U Axis

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

Specifications: - Drilling capacity in steel ST 60 approx. 50 mm - Thread cutting up to approx. M 50 - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Radius min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min / max – distance: - Spindle – base plate approx. 600 - 1250 mm - Machined base plate clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drilling spindle drive 400 V / 7.5 kW - E – hydraulic central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmB-axis (table): +120/-35 Gradc-axis: 360 Gradcontrol: HAAS für 5 Achsentool piece magazine with: 40 Plätzennumber of spindle speeds: 12000 U/mindimensions of the machine ca.: 4.3 x 2.35 x 2.8 mweight of the machine ca.: 8.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Spinner VZ 750 Year of construction: 2011 Hours : 6910 Spindle hours: 5114 Control Type: Fanuc OIMD-Alpha-Drive-HV-Technology Accessories: Chip conveyor Equipment: SK 40 Tool Pack

Key data: 900 mm, 600 mm, 500 mm

1 gebr. Portales Machining Center Make: Depo Model: Depo-Jet 906 Year of Make: 2004 Control: Heidenhain iTNC 530 Shuttering hours: approx. 32200 h Spindle hours : approx. 4900 h Spindle replacement in 2022 X axis 900mm Y axis 600mm Z axis 500mm Spindle nose to table nose 150-650 mm Table size 1100 x 600 mm Speed (BUILD-IN) 24000 Power 29 KW Mounting HSK-A63 Feed max. 1-20,000 mm/min X.Y.Z Eilagng rapid traverse 20,000 mm/min (0%, 30%, 50%, 100%) Magazine 20 tools Max. tool dia. Ø35 Max. tool length 220 mm Max. tool weight 7 kg Total power 47 KVA Machine (L x W x H) 3,010 x 3,716 x 3,100 mm Machine weight 11,000 kg XYZ Drive Protection Torque Limiting Clutch Direct Oil cooler ±1°C of ambient temperature in the workshop Position accuracy (X/Y/Z) 0.004 mm Reproducibility (X/Y/Z) 0.002 mm Accessories: Electronic handwheel Tool package HSK 63 Do ...

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

Unused stock machine from the demonstration room BJ 2021 - V 700 CNC machining center Siemens 828D Unused stock machine from the demonstration room BJ 2021 - MCV CNC Machining Center Siemens 828D Please see the photos for the details

Key data: 500 mm, 450 mm, 400 mm

1 gebr. 5-axis machining center Make: Deckel Maho Model: DMU 50 Year of Make: 2014 Control: Heidenhain iTNC 530 ______________________________________________________________________ _______________________________________ Specifications: Travel X - Axis 500 mm Travel Y - Axis 450 mm Travel Z axis 400 mm Clamping surface Ø 630 x 500 mm Table load 500 kg Rapid traverse 30 m/min. Speed 10,000 rqm Spindle drive 13 kW Tool magazine places 60 Tool holder SK 40 Machine weight approx. 4.5 t Accessories: ECO Tower 60 Fa. Lang NC Swivel Rotary Table C+B Axis Conveyor Coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Infrared probe Renishaw Documentation The machines can be viewed under power. Measurement protocol is available. Technical data and prior sale subject to .

Control Ultimax 4 Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 Wkz., SK 40

CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of Make: 1990 Control: FANUC O-M Travels: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 – 325 mm Distance between spindle nose and pallet table (Z-axis) 125 – 620 mm Rapid traverse movement: 24 m/min Feed movement up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed Actuators FANUC AC X/Y-Axis Model 5 Z-Axis Model 10 Main spindle revolutions: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet Indexing Angle: 7.5 degrees Indexing accuracy: +/- 2 sec. Repeatability: +/- 1 sec. Clamping force of the pallet: 3,400 kg Max. workpiece weight: 150 kg Automatic Tool Changer: Number of Tools 30 Tool change 2.5 sec. Collets Clamping Time 7 sec. Tool diameter max.: 110 mm Too ...