boring mills and machining centers used for sale (3,266)

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 25 - 2000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,50 x 1,08 x 2,50 mAccessories: box table 1100 x 700 x 550 mm, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 6723 Type: BA400-2 Producer: SW Created: 2004 Parameters: Control system: Siemens - Sinumerik 840D Maximum spindle speed: 17500 1/min Tool magazine: 120 pieces X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ High Pressure Pump Filtration Knoll Preparation for 5 axis

Key data: 900 mm, 560 mm, 480 mm

Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

S. No.: 238828

Ref. -No.: 10370Manufacturer: FANUCYear of construction: 1997Type of control: CNCControl: FANUC Series 16-MStorage location: HalberstadtCountry of origin: IrlandX-Travel: 500 mmY-Travel: 380 mmZ-Travel: 300 mmMachine length: 1560 mmMachine width: 2060 mmMachine Height: 2218 mmRotary Table (Lxw): 650 x 380 mmTable Load: 200 kgMax. Tool Weight: 2 kgMax. Tool Length: 120 - 200 mmMax. Tool Diameter: 65 mmTool change time: 1 sTool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / minRapid Traverse X-Axis: 48 m / minRapid Travel Y-Axis: 48 m / minRapid Traverse Z-Axis: 48 m / minWeight Of The Machine Ca.: 1,7 tMax spindle speed: 8000 min⁻¹Positioning accuracy in one direction (1): 0,006 / 300 mmPositioning repeatability (2): +/- 0,002 mm

Ref. -No.: 10361Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens, Heidenhain, Fanuc - Configurable as requiredStorage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSupport sleeve diameter: 130 mmX-Travel: 3000 mmY-Travel: 2000 mmZ-Travel: 1600 mmSpindle stroke: 800 mmB-Axis: 360 °W-Axis: 800 mmSpindle Taper: SK50 Max. Tool Weight: 25 kgClamping Area: 1250 x 1250 (or configurable as required) mmT - groove width: 22 mmT - slot spacing: 160 mmSwivelling: Configurable as required °Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPMMax. Torque: 2500 NmDrive Capacity - Spindle Motor: 41 kW

Ref. -No.: 10357Manufacturer: STARRAG HECKERTYear of construction: 2007Type of control: CNC SteuerungControl: Sinumerik 840DCountry of origin: SchweizX-Travel: 1200 mmY-Travel: 950 mmZ-Travel: 1200 mmWork spindle drive power (25% ED): 67 kWWork spindle torque (25% ED): 1508 NmTool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mmTool Piece Magazine With: 80 Pcs./pcs.Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mmFeed Speeds X/Y/Z Axis: 60000 mm / minFeed Capacities X/Y/Z: 22/18/22 NSpeed range - main spindle: 20 - 6000 RPMNumbers Of Pallets: 2 Max pallet load: 1500 kgSize Of Pallet: 800 x 630 mmpallet change time: 14 sPallet clamping area (lxw): 800 x 630 mmWeight Of The Machine Ca.: 25 t

Ref. -No.: 10356Manufacturer: AGIE CHARMILLESYear of construction: 2007Type of control: CNCControl: iTNC530Country of origin: SchweizX-Travel: 800 mmY-Travel: 500 mmZ-Travel: 540 mmMain spindle speed range: 16000 RPMTable Dimensions (Lengthxwidth): 910x500 mmTable Load: Vmax = 500kg, 5m/min = 1100kg kgNumber of T-slots: 5 Tool change time (chip-to-chip): 8 sMax. Tool Weight: 6 kgMax. Tool Length: 305 mmMax. Tool Diameter: 77 mmTool change time: 6 sT - slot spacing: 100 mmNumbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / minRapid Travel Y-Axis: 24 m / minRapid Traverse Z-Axis: 20 m / minFurther information:Addition: probe

Ref. -No.: 10354Manufacturer: UNIONYear of construction: 1998Retrofit: 2000Type of control: Digitale Steuerung 2DControl: HAIDENHAIN TNC 135Storage location: HalberstadtCountry of origin: DeutschlandX-Travel: 1600 mmY-Travel: 1250 mmZ-Travel: 1475 mmSpindle stroke: 710 mmTable Dimensions (Lengthxwidth): 1250x1400 mmSpindle Speed: 1600 RPMDrive Capacity - Spindle Motor: 30 kWTotal Power Requirement: 35 kW

Ref. -No.: 10353Manufacturer: UNIONYear of construction: 1986Type of control: KonventionellStorage location: HalberstadtCountry of origin: DeutschlandX-Travel: 1600 mmY-Travel: 1000 mmZ-Travel: 1200 mmW-Axis: 710 mmSpindle Taper: SK 40 Table Load: 2500 kgMax. Size Of Workpiece Lxwxh: Höhe 1400 mmSpindle Speed: 1600 RPMRapid Traverse: 3,15 m / minTotal Power Requirement: 23 kWWeight Of The Machine Ca.: 10,3 t

Ref. -No.: 10347Manufacturer: FPTYear of construction: 2006Type of control: CNCControl: Heidenhain 530Country of origin: ItalienX-Travel: 12000 mmY-Travel: 3500 mmZ-Travel: 1500 mmTool Piece Magazine With: 80 Pcs./pcs.Spindle Speed: 3000 RPMDrive Capacity - Spindle Motor: 37 kWRound table 1 (lxw): 2500x2500 mmRound Table 1 - V: 2000 mmRotary table 1 max. load: 30000 kgRound table 2 (lxw): 2500x2500 mmRound Table 2 - V: 1500 mmRotary table 2 max. load: 30000 kgFurther information:

Ref. -No.: 10350Manufacturer: FPTYear of construction: 2012Type of control: CNCControl: Heidenhain 530Storage location: HalberstadtCountry of origin: ItalienX-Travel: 14000 mmY-Travel: 5000 mmZ-Travel: 1500 mmW-Axis: 1000 mmNumbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kWRotary table diameter: 3000x3000 mmRotary table travel V: 2500 mmRotary table max. Load: 80000 kgswivel angle: 180 °Further information:+3D M Sensor+CNC controlled angle head: micro

Ref. -No.: 10342Manufacturer: STARRAG HECKERTYear of construction: 2015Type of control: CNCControl: Fanuc Series 16iStorage location: HalberstadtCountry of origin: SchweizSerial no.: 12217 X-Travel: 1000 mmY-Travel: 910 mmZ-Travel: 835 mmDistance spindle center - table: 100 mmTable Dimensions (Lengthxwidth): 630 x 800 mmTable Load: 1250 kgMax. Tool Length: 600 mmMax. Tool Diameter: 500 mmTool Taper: HSK-A 100 Numbers Of Tools In Magazin: 240 Spindle Speed: 20 - 6000 RPMFeed Capacities X/Y/Z: 20.000 NRapid Traverse: 40 m / minInternal cooling: 30/40/50 barExternal cooling: 2 bar

Ref. -No.: 10339Manufacturer: AGIE CHARMILLESYear of construction: 2008Type of control: CNCControl: Heidenhain iTNC 530 (2P)Storage location: HalberstadtCountry of origin: Schweizserial number: 107.20.00.040 X-Travel: 650 mmY-Travel: 600 mmZ-Travel: 500 mmMain spindle drive power: 30/39 kWMain spindle speed range: 20.000 RPMTable Dimensions (Lengthxwidth): 800 x 600 mmTable Load: 500 kgMax. Workpiece Weight: 6,5 kgTool change time (chip-to-chip): 7 sMax. Tool Length: 300 mmMax. Tool Diameter: 130 mmTool change time: 1,5 sWorkpiece Diameter At Full Load: 80 mmWorkpiece Diameter With 2 Vacant Positions: 130 mmT - groove width: 14 mmT - slot spacing: 63 mmTool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / minFeed Capacities X/Y/Z: 4/4/6 NFurther information:Laser tool measuring system Type = BLUM laser systems type P87.0634belt filt ...

Ref. -No.: 10335Manufacturer: HÜLLER HILLEYear of construction: 2008Type of control: CNCControl: Sinumerik 840D plStorage location: HalberstadtCountry of origin: GermanyX-Travel: 1000 mmY-Travel: 800 mmZ-Travel: 800 mmB-Axis: 360 °Machine length: 9500 mmMachine width: 4500 mmMachine Height: 3500 mmDistance spindle center - table: 150 mmTable Dimensions (Lengthxwidth): 500 x 630 mmTable Load: 800 kgMax. Workpiece Weight: 40 kgMax. Tool Length: 650 mmMax. Tool Diameter: 325 mmWorkpiece Diameter At Full Load: 100 mmTool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPMRapid Traverse: 60 m / minFurther information:Coolant system = 1250 l

Ref. -No.: 10304Manufacturer: SPINNERYear of construction: 2007Type of control: CNCControl: Siemens 840 D with SHOP MillStorage location: HalberstadtCountry of origin: GermanyX-Travel: 1100 mmY-Travel: 610 mmZ-Travel: 610 mmB-Axis: 0.001 prepared for 4 th axis °Main spindle drive power: 25 kWMain spindle speed range: 6000 RPMTable surface: 1200 x 600 mmTable Load: 1000 kgTool Taper: SK 50 Numbers Of Tools In Magazin: 24 axes: 4 Rapid Traverse X-Axis: 18 m / minRapid Travel Y-Axis: 18 m / minRapid Traverse Z-Axis: 15 m / minMain Drive: 25 kWWeight Of The Machine Ca.: 8 tFurther information:- additional 4 axis (Dividing head)

Ref. -No.: 10286Manufacturer: STARRAG HECKERTYear of construction: 2007Type of control: CNCControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: SchweizMachine-No.: 24139 X-Travel: 2800 mmY-Travel: 2100 mmZ-Travel: 1900 mmTable Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mmMax. Tool Weight: 35 kgWorkpiece Diameter At Full Load: 110 mmTool Piece Magazine With: 60 Pcs./pcs.Tool dimensions (with occupied adjacent spaces): 125 mmNumbers Of Pallets: 2 Operating hours: 26180 Hspindle running time: 26180h 43m 46s h/m/sautomatic mode: 28559 Hon time: 120 Hpallet change time: 60 sFurther information:internal coolant supply

Ref. -No.: 10201Manufacturer: AXAYear of construction: 2007Type of control: CNCControl: Siemens 840DStorage location: HalberstadtCountry of origin: DeutschlandX-Travel: 5000 mmY-Travel: 600 mmZ-Travel: 800 mmMachine length: 9400 mmMachine width: 3500 mmMachine Height: 3300 mmTable Dimensions (Lengthxwidth): 6325 x 1050 mmSwivelling: +/-90 °Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPMTool changer: SK 50 Drive Capacity - Spindle Motor: 45 kWWeight Of The Machine Ca.: 23 tTool change time: 6 sVertical working height: 0-740 mmWorking height horizontal: 250-1050 mmSpace requirement (LxWxH): 11000 x 5090 x 3300 mmFeed rate: X/Y/Z: 40 m / min

Ref. -No.: 10144Manufacturer: DECKELYear of construction: 2001Type of control: CNCControl: Heidenhain Mill PlusStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 11130000713 X-Travel: 880 mmY-Travel: 630 mmZ-Travel: 630 mmMachine length: 3600 mmMachine width: 2700 mmMachine Height: 2500 mmTable Dimensions (Lengthxwidth): 1250 x 700 mmTable Load: 1000 kgMax. Workpiece Weight: 8 kgTool Taper: SK 40 Tool Piece Magazine With: 32 Pcs./pcs.Spindle Speed: 18.000 RPMRapid Traverse: 30 m / minTotal connected load max.: 37 kVAWeight Of The Machine Ca.: 9 tOperating hours: 42.340 HFurther information:Additional information:• Table: swivel milling head

Ref. -No.: 10142Manufacturer: TIBOYear of construction: 2002Type of control: CNCControl: Siemens Sinumerik 802DStorage location: HalberstadtCountry of origin: DeutschlandDrilling diameter: 1-13 mmBore Depth: 250 mmDrilling spindle speed: 11.000 RPMX-Travel: 300 mmY-Travel: 210 mmZ-Travel: 250 mmMachine weight: 2,5 tFurther information:- With equipment

Ref. -No.: 10022Manufacturer: UNIONYear of construction: 2001Type of control: CNCControl: Heidenhain-Steuerung TNC 310Storage location: HalberstadtCountry of origin: DeutschlandX-Travel: 2000 mmY-Travel: 1600 mmZ-Travel: 2000 mmMachine length: 6950 mmMachine width: 4685 mmMachine Height: 3885 mmTable Height: 1050 mmSpindle Diameter: 110 mmSpindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mmFaceplate speed: 5,6 - 224 RPMSpindle Speed: 5,6 - 1120 RPMMetric thread feeds: 1,25 - 56 mmDrive Capacity - Spindle Motor: 40 kWWeight Of The Machine Ca.: 25 tBore Depth: W 800 mmFurther information:with facing slide13 inch thread feeds 1 1/8 - 28 Gg / 1 “YOM: 1990/ Retrofit: 2001

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Double Column Machine SNK RB-7VM Year 2007 5 axis control (X,Y,Z, Wm, Ws) FANUC 18i-MB Bet Column : 4100 Table : 6000 X 3500 XYZ: 6250 x 4500 x 600 W: 2100 Main axis / Quil: 90/ 300 40~8000 rpm ATC :40, AAC Angular Attachment : (L=300)

bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 feed range - spindle: 30 - 400 mm/Uspindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad w ...