meat and fish processing machines used for sale (1,812)

Manufacturer: Laska Type: KU 200 V.DC Model : 0214 Year of construction : 2012 Power: 97 kW Weight: 4300 kg Length x width x height: 3900 x 2300 x 1660 mm Connection: 400V 50 Hz Bowl volume: 200 L - Cutter Vacuum 200 L - With feeder and ejector Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Italma slicer, flywheel machine on a pedestal, red lacquered in vintage style, knife diameter 330mm, the flywheel automatically drives the blade, carriage and feed, an eye-catcher for customers. Weight approx. 123kg, Machine used, in good condition, fully functional

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Year of Make: 2006 Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Tool trolley for cutting machine, fish slicer GEBA GPS 200 (Röscher) Dimensions LxWxH approx. 120x65x97cm, weight approx. 44kg, only car without accessories, used, good condition

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

Commercial dishwasher MEIKO M-iClean UL Specifications: Total dimensions: H148 x W60 x D68 cm Basket dimensions: L50 x D50 cm Dimensions flushing chamber: H43 x W54 x D60 cm 400V / 50 Hz / 6.8 kW / 15 A Year of Make: 2017 digital control, 3 programs 90/120/180 sec with reverse osmosis system Function checked, machine is ready for use Stock machine, immediately available! Condition see original pictures! Call or email if you have any questions.

Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures!

Injector with brine mixer Manufacturer: Inject Star Model: BI-124-C-P Made of stainless steel Number of needles: 124 Productivity: 5500 kg/h max Electric power: 5.6 kW Voltage: 400V 50Hz Brine mixer Model: CLB-800 Volume: 800 liters Electric power: 5kW Voltage: 400V 50Hz Touch screen computer control Double cooling Glass gauge for fluid level measuring

Mixer - Grinder KOLBE Type: MWE 32 Diameter: 100mm Chopper volume: 120l Capacity for 3 mm: 1400 kg/h Mixing speed: 24 rpm/min Power main motor: 5,5 kW Power mixing motor: 1,1 kW Dimensions: 1250 x 800 x 1350 mm Weight netto: 480 kg Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

A curing injector from Günther is sold Type: PI 17 Year of construction 2016 Capacity: approx. 300 to 500 kg/ hour Equipped with 17 needles in 2 rows, needle size (standard) approx. 4.0 mm The injection quantity is infinitely variable from 2 to 25 % Machine is in very good condition and ready for immediate use Price from stock 6000€ net

Height 1200 mm Width 1250 mm Length 1750 mm Weight 600 kg Capacity 3500 kg/h Power supply: 400V 50Hz 3N Total power 52 kW Cutter Type Through Cutter Cutter design Stainless steel, acid-resistant Knife shaft speed 2970 rpm

Height 2000 mm Width 1900 mm Length 4000 mm Capacity 2600 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Manual Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Loading Loading integrated into the machine Load 1800 kg

Height 1950 mm Width 1800 mm Length 1500 mm Weight 1400 kg Power supply: 400V 50Hz 3N Total power 18 kW Loading Loading integrated into the machine Description Vacuum filler Handtmann VF 622 in a set with a grinder GD 93-3

Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Mobile lift for meat cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

WEBER CCS 602 WITH FLOWPACK PACKAGING LINE IN PERFECT CONDITION

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of manufacture: 2018 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Injectstar Vacuum tumbler Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph

Ruhle MKR130 Tumbler 2015, Stainless, 130l tumbler, 3Kw, mobile, 3Ph

Manufacturer: Fatosa Type: TBG 480 Year of Make: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum block size: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: Length 1350 x Width 700 x Height 1750 cm With raised front cover - height 2117 mm The guillotine is only equipped with a cross-cutting blade. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

Weber ASC 560 in absolute top condition

Used Meyn model 20U carcass washing device for the inside and outside. New 2002.

Used Cropping machine Meyn 20U. New 2002.

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Type MultiShaker 450/1600 completely stainless steel Track width 450 mm Length: 1,800 mm Insertion height: 1,350 mm 400V, 50Hz, 16A Opening grid: 2 mm Dimensions (L x W x H) : ± 1,900 x 1,100 x 1,450 mm

completely stainless steel electrically heated (= 324 kW) Total assets 343 kW Teflon Insertion Tape Belt length 6,000 mm Track width 650 mm suitable for fire protection Stepless speed suitable for fire protection Discharge belt Oil level control Circulation Pump Dirt transport Filter electric hoist Dimensions (L x W x H) : ± 9,700 x 2,200 x 3,000 mm Weight : 5.350 kg suitable for cleaning system "CIP" Capacity : 3 x 400V, 50Hz