milling machines used for sale (2,494)

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 95 mm -Clamping height: 85 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 180/35/H70 mm -Weight: 1.0 kg/piece

Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Kopal, Compact Clamp Monobloc -Type: Piccolo Projection 54 mm -Clamping height: 58 mm -Number: 4x tensioners available -Price: per piece -Dimensions: 135/35/H70 mm -Weight: 0.9 kg/piece

Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1200 mmy-travel: 600 mmz-travel: 500 mmControl: Dialog 11 turning speed range: 0 - 6.300 U/minspindle taper ISO: 40 total power requirement: 10 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4 x 3 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 650 , 650

We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410

MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible.

Key data: 2500 mm, 1000 mm, 1100 mm

CNC Bed Milling Machine Manufacturer: Anayak Type Performer 2500 Year of manufacture 2007 Control Heidenhain iTNC530 ( with new monitor ) Table size 2700 x 850mm Load 6,000kg Travel X/Y/Z 2500/1000/1100mm Tool holder SK50 IKZ Internal Coolant Supply Chip conveyor Electronic Handwheel Heidenhain HR410 Head cannot be swivelled over program Engine on: 54.205h Spindle on : 14.850h Without the accessories that can be seen.

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparati ...

x-travel: 1600 mmy-travel: 710 mmz-travel: 700 mmControl: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mmspindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/minspindle drive: 11 kWfeed X/Y/Z-axis: 2000/2000/1000 mm/min.rapid traverse X/Y/Z axis: 5000/5000/2500 mm/minfeed motor: 3 kWdistance table / vertical spindle: 50 - 750 mmdistance table/horizontal spindle: 60 - 760 mmtable load: max. 3000 kgtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of machine L x W x H: 3,50 x 2,82 x 2,70 mAccessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 260 mm-56 teeth: belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-50 Ø 50 x 65 mm-Dimensions: Ø 255 x 100 mm-Weight: 22.6 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 141 mm-Dimensions: see photo technical drawing-Dimensions: 157/72/H108 mm-Weight: 1.8 kg

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 2 pieces-Clamping width: 50 mm-Price/Delivery: complete-Dimensions: 120/60/H140 mm-Weight: 1.9 kg/piece

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 4 pieces-Clamping width: 50 mm-Bore: Ø 30 mm-Price/Delivery: complete-Dimensions: 100/60/H45 mm-Weight: 1.0 kg/piece

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600-Table surface: 530 x 900 mm-T grooves: groove width 14 mm, groove spacing 63 mm-Transport dimensions: 900/530/H390 mm-Weight: 248 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 95 mm-Dimensions: see photo technical drawing-Dimensions: 110/60/H98 mm-Weight: 1.3 kg

Tool carrier for SK 30 holders-made of: polypropylene copolymer-Impact and scratch resistant, insensitive to heat-resistant to: mineral oil and various chemicals-Price: complete

Copy part head, copy head, part head-Copy head rail for: lathe, grinder-Dimensions: 465/80/H410 mm-Weight: 10 kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 255 mm-Type: 56-14M-85-56 teeth: belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm-Dimensions: Ø 255 x 100 mm-Weight: 24.5 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 143 mm-Dimensions: see photo technical drawing-Number: 2x clamps available-Price: per piece-Dimensions: 166/57/H115 mm-Weight: 1.7 kg/pc.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm

turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table-Tactical table: pneumatic-Clamping surface: Ø 270 mm-Division: 24-Dimensions: 500/130/H280 mm-Weight: 35.7 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 228 mm -Type: D TB 90-8M-50 -Number of teeth: 90 teeth / Belt width: 50 mm -Mount: Taper clamping bushing 3020-40 / Ø 40 x 50.8 mm -Dimensions: Ø 228 x 60 mm -Weight: 12 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.