milling machines used for sale (2,497)

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 830 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from atraining workshop.Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123- Manual mode: Manual operation and positioning with manual input- Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing ManualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

x-axis: 5000 mmy-axis: 4000 mmz-axis: 1400 mmdistance between columns: 3500 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5020 x 3000 mmworkpiece weight: 16 tControl: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m5 Sided Machining Center equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- Coolant through Spindle- X/Y/Z axis linear guide way- X/Y linear ScalesHeads:-- 90 degree head (auto 5 degree indexing)-- 200mm extension 90 degree head (mounted on table)-- 350mm extension head (mounted on table)- Air conditioner- Oil skimmer- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2200 mm, 600 mm, 600 mm

Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Thr ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC M ...

x-travel: 710 mmy-travel: 600 mmz-travel: 500 mmNC-rotary table: 630 mmspindle taper: SK 40 spindle turning speed range: 18 - 6300 U/mincontrol: DIALOG 4 feed: 2 - 3600 mm/minrapid traverse: 6 m/mintable load: max. 485 kgquill stroke: 80 mmspindle drive: 9,5 kWtotal power requirement: 20 kVAweight of the machine ca.: 4,6 tdimensions: 3,8 x 2,24 x 2,35 mAccessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mmy-travel: 385 mmz-travel: 380 mmtable surface area: 800 x 460 mmspindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/minfeeds: 10 - 1000 mm/minrapid traverse: 2 m/mintable load capacity: 600 kgquill stroke: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,0 tdimensions: 2,4 x 1,7 x 1,98 mAcc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant- movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4,4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 222,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

x-travel: 1500 mmy-travel: 800 mmz-travel: 800 mmtable-size: 2.200 x 750 mmhandwheel: Ink. number of spindle speeds: 3.000 U/min/rpmspindle drive: 15 kWtool taper: SK - 50 Control: Heidenhein TNC 426 total power requirement: 30 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: 2 x SK 40 forward bearing diameter: 110 mmmilling head speed: 100 - 4500 U/minmilling drive: 5,1 kWworkpiece length - max.: 830 mmworkpiece dia. with double equipment: max. 135 mmtaper diameter: 78 g6 mmcentre height: 260 mmturning speed range - stepless: max. 15 U/mindistance of spindles: 135 mmspindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mmFeed speed: max. 6 m/min.surface area: 200 x 1750 mm: tool post (Z-axis): stroke of tool slide: 120 mmFeed speed: max. 2 m/min.column movement: 200 mm: tail stock: tailstock quill stroke: 100 mmmorse taper: 3 MKcentre height: 260 mmaxial distance of the quills: 135 mmpassage of steadyrest: 40 - 80 mmcontrol: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 twith SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolantThe data for this  ...

x-travel: 2800 mmy-travel: 1000 mmz-travel: 1200 mmtable surface area: 2000 x 800 mmrotary table dia.: 800 mmspindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/minmax. torque on the spindle: 3000 Nmspindle drive: 30 kWfeeds longditudinal/cross/vertical: 2 - 2000 mm/minrapid motion -longitudinal/cross/vertical: 7 m/mincontrol: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mmwotkpiece diameter with 2 vacant positions: 200 mmworkpiece length: 400 mmweight of tools max.: 16 kgtool changing time: ca. 8 - 9 secinternal coolant system feed: ja / yes total power requirement: kWweight of the machine ca.: 25,4 t= 5-axis CNC-bed-type milling machine with integrated NC-rotary table andNC-swivelling milling head -Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration  ...

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine.

This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine.

This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information.

This 3-axis Auerbach FUW 625 was manufactured in 1997. It features a travel of 625 mm in the X-axis, 525 mm in the Y-axis, and 455 mm in the Z-axis. The machine is equipped with a 20-slot tool changer and operates at spindle speeds ranging from 25 to 5,000 RPM. If you are looking to get high-quality machining capabilities, consider the Auerbach FUW 625 vertical machining centre we have for sale. Contact us for further details.

A CNC spindle machine Klaaßen is available. Main motor power: 12kW, tool interface: HSK-63, speed: 6000rpm, max. machining dimensions X/Y/Z: 1800mm/1800mm/445mm, feed rate: 15m/min, indexing angle: 4x90°, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t

Key data: 4000 mm, 2500 mm, 1300 mm

VERY RARE – A USED MACHINE OF THIS TYPE IS HARDLY AVAILABLE ON THE MARKET We are pleased to offer you the following high-performance machine: This machine combines precision, performance and flexibility – ideal for demanding pattern and mould making as well as for high-performance aluminium machining. Due to its latest technology, specification, very good condition and year of manufacture, it represents an exceptionally rare opportunity on the second-hand market. 5-Axis CNC Gantry Milling Machine FPT Dinospin Year of construction 2019 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Table load max. 10 t/m² 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Head torque (working/braking torque) 450 / 1400 Nm Travels: X 4,000 mm Y 2,500 mm Z 1,300 mm Feeds X/Y/Z up to 40,000 mm/min Feeds C/A up to 30 rpm Spindle drive power 22 ...

x-travel: 6.500 mmy-travel: 1.800 mmz-travel: 1.300 mmcontrol: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mmmax. workpiece weight: 13.500 kg/m²Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° HirtverzahnungConstant Power at 100 % ED: 37 kWSpeed range, stepless: 15 - 7.000 min-1max. torque: 1.045 Nmtool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mmworkpiece length: 400 mmweight of tools max.: 20 kginternal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minrapid in X/Y/Z: 35.000 mm/minmax. feed force X-Y-Z-axis: 16.000 Ntotal power requirement: kWweight of the machine ca.: 34 tdimensions of the machine ca. ...

x-travel: 4.700 mmy-travel: 1.250 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 5.000 x 1.000 mmmax. workpiece weight: 10.000 kgT-slot number x size: 7 x 22 Abstand 140 mm Universal Milling Head: _ Swiveling area front/back level: automatisch Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 37 kWSpeed range, stepless: 35 - 4.500 min-1max. torque: 880 Nmtool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/240 mmworkpiece length: 300 mmweight of tools max.: 25 kgfeeds: - X-, Y- and Z-axis, stepless: 6 - 15.000 mm/minrapid in X/Y/Z: 25.000 m/minmax. feed force X-Y-Z-axis: 10.000 Ntotal power requirement: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 12,7 x 5,6 x 4,2 mEquipment / Accessories:Heavy-duty bed-type ...

x-travel: 4000 mmy-travel: 2500 mmz-travel: 1300 mmControl: Heidenhain TNC 640 table-size: 4000 x 2500 mmtable load: 10 t/m²spindle turning speed range: 18000 U/mintool taper: HSK A 63 feed: 40.000 mm/minspindle motor: 33 kWA-Axis: +/- 185 °c-axis: +/- 270 °distance between columns: - mmPassage height: - mmtotal power requirement: - kWweight of the machine ca.: 44,5 tdimensions of the machine ca.: - mEquipped with:- Heidenhain TNC 640 CNC control- Tupce universal milling head (2 axes) for 5-axis machining- 80-position tool changer (HSK A63)- Coolant system- CE mark- Enclosure- Measuring head for workpiece measurementThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4.000 mmy-travel: 1.700 mmz-travel: 1.500 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mmmax. workpiece weight: 10.000 kg/m²T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minOrthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kWSpeed range, stepless: 60 - 6.000 min-1max. torque: 1.500 Nmtool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mmworkpiece length: 400 mmweight of tools max.: 25 kgchanging positions: Horizontal/Vertikal total power requirement: kWweight of the machine ca.: 50 tdimensions of the machine ca.: 11,0 x 6,0 x 4,6 mEquipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via internal Hirth serr ...

x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mm: 50 m/min.: 9000/9000/6000 N: 15000 U/min: HSK 100 : 44 / 35 kW: 360 °: +/- 110 °: 5000 x 3000 mmcontrol: Fidia C20 distance between columns: 4500 mmdist. milling spindle - table surface: mmtotal power requirement: - kVA: 38 t: - mUniversal - CNC 5-axis - HIGH SPEED - Portal machining centre inGANTRY design- CNC control FIDIA C 20- Milling head: T2K– Spindle MFW-1813/27/1 (HSK 100)– External coolant supply– Minimum quantity coolant dosing– Scraper conveyor– Ethernet connection– Hand-held control module- 5-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.