milling machines used for sale (2,501)

Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible.

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

A CNC 5-axis high-speed milling machine Wissner is available. Travel path X/Y/Z: 600mm/500mm/350mm, max. workpiece weight: 460kg, table dimensions X/Y: 700mm/600mm, tool holder: HSK-F63. Machine dimensions X/Y/Z: approx. 2500mm/2950mm/1850mm, weight: approx. 3500kg, control: CNC HSC 6000. Includes Schunk NSE Plus 138-V1 zero-point clamping system, SPA 40 RF clamping pins, Hyfra Chilly 35 cooling system, air blast function, and tool measuring system. Documentation available. An on-site inspection is possible.

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

x-travel: 4500 mmy-travel: 3800 mmz-travel: 1850 mmcolumn daylight: Z = 1900 mmcolumn daylight: Y = 5330 mmtable surface area: 4500 x 4600 mmtable load: 50 tmilling head speed: 40 - 2000 U/minfeeds x/y/z -stepless: 6 - 4000 mm/minrapid travel x/y/z: 6000 mm/minmilling drive: 40 kWmilling spindle diameter in the forward pos.: 160 mmtool taper: Steilk. 60 milling spindle quill diameter: 260 Control: Siemens 840D total power requirement: ca. 60 kWweight of the machine ca.: 115 tdimensions of the machine ca.: 10,0 x 5,0 x 5,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.

Heidenhain TNC 530, Table size 700 x 500 mm, Spindle holder CAT40, 24-position automatic, 10,000 rpm spindle Machine weight 7,500 kg, Connection 16 kW

WMW HECKERT FU450R-51 universal milling machine was built in 2009 in Belarus by Gomel Machine Tool Plant S.M. Kirov.. This extremely versatile, functional and reliable machine is designed for precision machining of workpieces with a maximum weight of 1500 kg. The machining process is performed by a powerful spindle on a large work table. T-slots in the table allow for quick installation of additional tooling such as a vice. The precision and repeatability of the manufactured parts, in turn, is maximised by the design made of the highest quality cast iron, which maintains excellent stability during even the most intensive challenges. All this makes the offered FU450R conventional milling machine an excellent choice for both unit and series production. The WMW HECKERT vertical milling machine weighs 4300 kg. Technical specifications of the WMW HECKERT FU450R-51 milling machine - number ...

Key data: 8000 mm, 1300 mm, 2200 mm

1 new CNC travelling column milling machine Make: Soraluce Model: FL 8000 Year of manufacture: 2014/15 Spindle hours: 3242 Hours: 4261 Control: Siemens 840 D Solution Line Technical data: Travel distances X-Y-Z: 8000 x 1300 x 1800 mm Travel C-axis: 360 degrees Plate clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm. Main drive: 43 kw. Rapid traverse: 35 m/min. CNC rotary table: 1600 mm 250 rpm Weight approx.; 40 to. Equipment / Accessories: Tool magazine: Controlled universal milling head Conveyor Full enclosure Complete cooling water system  ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power ...

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power ...

CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post

7-axis turn/milling machine Bumotec S192 – with fully automatic LNS chip conveyor and integrated mud pump Oil cooler Axle cooler Milling spindle 30000 revolutions/min. Breuning Short Bar Loader Elbaron Suction Includes 2 rotary holders and 3 drill holders with HSK 40A adapter Includes 2 collets Counter spindle can be used with 2 jaw chuck or collet E173

Fraese Fritz Werner TC800BJ 1984

Universal tool milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 123 Year of Make: 1994 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer 1 pc. machine vise 1 pc. counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm , 0 16 mm , 0 27 mm Various tool holders S 22 x 2 Bellows Z axis 1 chip protection Machine Light Automatic central lubrication pump Coolant Setup Operating instructions THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally t ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...

x-travel: 450 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axes digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 450 mmQuerweg Y / Y-travel cross 300 mmSenkrechtweg Z / Z-travel vertical 350 mmTischgröße / table size 800x400 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpmVorschubbereich / feed range 8-400 mm/min.Antriebsleistung / power capacity 3,2 kWGewicht der Maschine / weight 1500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - defective, gear wheel worn, milling head already dismantled, replacement of the gear wheel was no longer possible due to insolvency, spare parts costs according to the former operator approx. 1,500 EUR. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/73 ...