other food machines used for sale (998)

Make: KSB Model: Krr-EX-200-500 Capacity: 90m3/hr Built: 2000 Pump height: 19m DN 200 The pump is designed for water or sludge, with open impeller! Originally, a 30KW engine was installed.

This machine was designed and manufactured in our house. It is made entirely of stainless steel Can unstack bucket with, as well as without handle the power is 450 pieces per hour, each bucket size can be used. We remanufacture for them according to their wishes and ideas.

It is a lid laying station , designed and manufactured in our house. This machine puts lids on previously filled buckets and presses them firmly. This unit consists of an up-and-down station and a boom, this machine can be used universally and is manufactured according to your wishes and ideas. (the system is new)

This is a lid laying machine made entirely of stainless steel, designed and manufactured by us. It places lids on previously filled buckets, which are then also firmly pressed. The lids are disinfected beforehand, This machine it can be used variably and is manufactured according to your ideas and wishes. (The system is new)

The Bühler MYFC is an automatic humidity control system used in grain mills. It measures grain moisture and flow rate in real time, calculates the exact amount of water needed, and adjusts liquid dosage to ensure uniform and consistent grinding. How the MYFC system works: The device manages the conditioning of the grain before milling through integrated components: •Continuous measurement: Detects the initial moisture and flow of the incoming product. -Precise calculation: Process data to determine the exact amount of water to add. •Automatic dosing: Communicates with the wetting unit to regulate the flow of liquids to the millimeter.

Alfa Laval BRPX 413 XGD-14 tools Used hydraulic capacity 18,000 l/h motor 30kW Centrifuge for food purposes / fat Very good condition

- Optical Sorting Technology: Uses an advanced inspection system with high-resolution cameras, often enhanced by LED or IR lights, to detect defects and foreign materials within and outside the visible spectrum. 2 Chute configuration that allows high processing capacity and, in some cases, product rearrangement to maximize efficiency. - InGaAs technology: InGaAs (indium gallium arsenide) technology, based on infrared, improves the visibility of defects that have the same color as the good product. - Pneumatic Ejectors: Uses high-speed, high-precision ejectors to remove defective materials with compressed air jets, minimizing good product waste. - Intuitive Operating Software: Operated via a graphical touchscreen user interface (GUI) that makes it easy to control the process and adjust sensitivity settings. - Versatility: It is a flexible solution that can be configured for a wide ra ...

Automatic cereal humidification equipment Fully overhauled, tested and painted

Stock# U2441-1 Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs.

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Alfa Laval BRPX 313 SFD-34C Tools control panel

De-stoner Buhler MTSB150, overhauled, T12 / 14 hour,

Buhler MTMA 15.100 separator, overhauled

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-487

Straight stainless steel conveyor. Equipped: - Plastic pallet conveyor length 5000 mm - width 200 mm - Cleats on the conveyor 200 mm wide and 20 mm high, 250 mm centre distance. - Adjustable working height - Geared motor drive. Mounted on legs 230V Auction-ID: A1-51318-269

With SEW motor Equipped with stainless steel base with castors and brake Auction-ID: A1-50943-339

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-484

400V Auction-ID: A1-50943-134

With guide rail. Height adjustable. Auction-ID: A1-50943-370

Stainless steel base with castors and brake Auction-ID: A1-50943-138

Straight conveyor Equipped: - Plastic pallet conveyor length 2900 mm - width 500 mm - Adjustable working height - Geared motor drive. Mounted on legs Auction-ID: A1-51318-268

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-51921-486

Auction-ID: A1-50943-168

Equipped with SEW motor and swivel wheels with brake. Auction-ID: A1-50943-330

400V Auction-ID: A1-50943-133

Equipped with stainless steel base with castors and brake Auction-ID: A1-50943-71

Conveyor with 90° curve Equipped: - First part of the plastic pallet conveyor 280 mm wide - length 900 mm then 90° turn - Straight part of the plastic pallet conveyor width 280 mm - length 4000 mm - Inclined conveyor, loading at a height of 1500 mm and exit of the conveyor at 900 mm. - Motor-inverter drive Mounted on wheeled legs Motor power: 0.40 kW Auction-ID: A1-51318-233

Belt width 1,000 mm, belt length 3,300 mm, with 4 circulation pallets as fixture carriers, Dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself Auction-ID: A1-51921-579

With guide rail. Height adjustable. Auction-ID: A1-50943-371