other machines and plants used for sale (22,264)

GCX M Series WMM-0001-01B – Monitor Stand ArmManufacturer: GCXModel: WMM-0001-01BType: M Series Articulating Arm for Philips Patient MonitorsLoad: Up to 27 kg; Tilt up to 14 kgAttachment: Quick Release Interface with Dual PinCondition: Very Good, Functional Auction-ID: A1-51275-170

Betamaquet 1140 – Electric operating tableManufacturer: MaquetModel: Betamaquet 1140Type: Electric mobile operating table with removable trayAdjustments: Height (approx. 72–108 cm), Trendelenburg / anti-Trendelenburg, lateral tiltMissing element: Remote control not includedCondition: Good condition – sold as is (without remote control) Auction-ID: A1-51275-158

Stryker RemB 6400-099-000 – Universal Surgical MotorManufacturer: StrykerModel: RemB 6400-099-000Type: Universal Driver RemB, Pistol Type Handpiece (No Accessories Mentioned)Condition: Good Aesthetic Condition – Untested, Sold As Is Auction-ID: A1-51275-180

GE Carescape B650 Patient MonitorMultiparameter monitor for OR, ICU, ICU and neonatology. Manufacturer: GEModel: Carescape B650Configurable 15-inch displayStatus: Lights up, not tested, sold as is – corrupted software (see photos) Auction-ID: A1-51275-104

Drive motor mould mill 110 kW; drive motor classifier 15 kW; supply pipe; including all air transport system including supply including magnetic separator; Jaudt dosing valve / cell wheel lock; explosion protection; GEA cairplus SX filter chamber; Equipped with landing floor 340x145; floor height 150 cm; with 3x various boxes parts explosion hatch; 1x complete overhaul kit stator blades; 1x new classifier in transport crate Auction-ID: A1-50864-2

Sony UP-20 – Colour Video PrinterManufacturer: SonyModel: UP-20 Near-A6colour prints, approx. 400 dpiDefects: Missing plastic cover of a button, some broken plastic parts (see photos)Condition: Okay condition, not tested – according to the seller, the device still works fine Auction-ID: A1-51275-81

Haemonetics Cell Saver 5 Plus – Blood Recovery SystemCollection, washing, and concentration of spilled blood for reinjection into the patient. Manufacturer: HaemoneticsModel: Cell Saver 5 PlusType: Intraoperative / Autotransfusion Blood Recovery SystemCondition: Good, Functional Auction-ID: A1-51275-185

Pajunk MultiStim Sensor NeurostimulatorPeripheral nerve localization in regional anesthesia. Manufacturer: PajunkModel: MultiStim SensorPulse duration from 0.05 to 1.0 msFrequency 1 Hz or 2 HzCondition: Good condition, as shown in the photos Auction-ID: A1-51275-132

Gambro / Baxter / Hospal Evosys Hemodialysis GeneratorManufacturer: GambroModel: EvosysAlso known as Artis / Artis Physio StationaryMachine for Routine DialysisCondition: Good working condition Auction-ID: A1-51275-112

\"General Description Continuous fusing press manufactured by Oshima Co., Ltd., model OP-1000SP. Industrial textile machine designed for continuous heat-and-pressure bonding of fusible interlining to fabrics in garment and textile production. Technical Details Manufacturer: Oshima Co., Ltd. Model: OP-1000SP Machine type: Continuous fusing press Year: 2024 Serial number: 23 (partially legible) Fusing width: 1,000 mm Maximum temperature: 200°C Maximum pressure: 0.5 MPa Fusing time: 7–34 sec Power supply: 3-phase, 380 V, 50/60 Hz Rated current: 45 A Heater power: 28.8 kW Drive motor: Approx. 0.2 kW Two-stage pressure system Silicone-covered pressure rollers Upper and lower continuous fusing belts Separate heating chambers with temperature control Automatic belt guiding / correction system Cooling system Fabric stripping system Emergency stop and pressure gauges Condition Used, visually ...

Dimensions 105x105x25cm LxWxH; Connection 380V Auction-ID: A1-50864-193

BioMS Neonatal Incubator Natisse ÉlevageIncubator for the care of newborns, especially premature infants. Manufacturer: BiomsModel: NatisseCondition: To be repaired – lights up with error, not tested, sold as is Auction-ID: A1-51275-99

Please note! Lot is located on the 1st floor only accessible by stairs; Lot is sold empty Auction-ID: A1-50864-177

Auction-ID: A1-50864-145

Approximately 15 pieces of various sizes; on pallet Auction-ID: A1-50864-77

Content consisting of helmets; Shoe socks Auction-ID: A1-50864-128

Sony CMA-D2MD – Endoscopy Camera AdapterManufacturer: SonyModel: CMA-D2MDApplication: Endoscopy / LaparoscopyConnections: 12-pin CCMC cable, Genlock In, Video Out, S-Video, AC inputCondition: Very good pre-owned condition, functional tested Auction-ID: A1-51275-37

258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirtThis 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical dataCylindrical on self-emptying skirtCapacity: 25,800 litresMaterial: stainless steelTank number: 11, 12 and 13Closed roofwith chimney and hatch Ø 550 mm2 lifting ringsFerrule1 taster valve1 rectangular door 430×540 mm at the bottom of the ferrule1 partial drain valve DIN 50 with plug1 winding tubeBottomSloped bottom on skirt1 total drain valve DIN 504 feet under the skirtDimensionsDiameter: 3000 mmTotal height: 5500 mmLocation: Mont ...

127 hL – 1976 Snel-Inox – Vertical cylindrical stainless steel tank closed on legsTechnical dataVertical cylindrical tank on closed legsBrand: SNEL-INOXCapacity: 127 HLMaterial: stainless steelYear: 1976Conical roofCentered hatch DN 500 mmLifting ringsFerruleOval door at the bottom of the ferrulePartial drain on square flange80×80 mm with butterfly valve DN 40 MÂCONConical bottomTotal drain on square flange 80×80 mm without outlet valve DN 40 MÂCON3 feet H. 400 mmDimensionsDiameter: 2300 mmFerrule height: 3000 mmTotal height: 3850 mmLocation: Monteux (84)Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-267

107 hL – Lejeune – 304 stainless steel tank on legsThis LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tankBrand: LEJEUNETotal capacity: 10,700 litresMaterial: stainless steelRoof2 lifting ringsChimney ChimneyShell1 ladder support bar1 taster tap1 rectangular door1 partial drain valve on square flangeBottomConical1 total drain valve on square flange4 feet stainless steel with lifting eyeDimensionsDiameter: 2200 mmHeight: 4200 mmLocation: CivrayEquipment sold loaded on truck: additional mandatory dismantling and loading fees appl ...

2010 Lowara SHS 32-125/11/A – Centrifugal pump 9-24 m³/hThis used LOWARA SHS 32-125/11/A centrifugal pump is a reliable and efficient solution for liquid transfer operations in the food, wine or industrial environment. Equipped with a 1.1 kW three-phase motor, it offers a flow rate of 9 to 24 m³/h for a head of 19.4 to 9.8 m. Compact, robust and made in Italy, it is an immediately operational equipment to complete or strengthen a pumping installation while controlling the investment. Technical dataBrand: LOWARAModel: SHS 32-125/11/AYear: 2010Type: centrifugal pumpFlow rate: 9 to 24 m³/hHMT: 19.4 to 9.8 mMotor power: 1.1 kWMotor: three-phase 3~Power supply: 230/400 V – 50 HzCurrent: 4.52 / 2.61 AMotor speed: 2875 rpmProtection class: IP55Insulation class: FLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-244

Grundfos CR 16-30 – Vertical multistage pump 16 m³/h GeneraldescriptionVertical multistage in-line pump for the transfer of clean liquids. Industrial design recognized for its reliability, hydraulic efficiency and compactness. Model suitable for continuous applications in agricultural, vineyard or industrial environments. Manufacturer identificationBrand: GrundfosSeries: CRType: CR 16-30Manufacture: DenmarkHydrolic characteristicsNominal flow rate: 16 m3/hPressure head: 34.4 mCERotational speed: 2,000 rpmMaximum permissible pressure: 16 barInstallation direction: VerticalInlets/outlets: In-line flanges (opposite suction/discharge)ConstructionStainless steel pump body (typical CR series)Vertical multistage stagesCast iron base with fixing holesLongitudinal tie rodsGrundfos standard mechanical sealVertically mounted electric motor (three-phase - motor plate to be confirmed if required)C ...

250 hL – Vertical 304 stainless steel tank on legsThis 304 stainless steel storage tank with a capacity of 250 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and its coil radiator thermoregulation system, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical on legsVolume: 250 HLMaterial: stainless steel 304RoofCentral chimney with hatch2 lifting ringsFerrule1 ladder support bar1 taster tap1 full level tube1 partial drain valve on square flange1 ractangular door external opening on the bottom of the ferrule1 coil radiatorConical bottom1 total drain valve on square flange5 feet stainless steelDimensionsDiameter: 2800 mmTotal height: 5000 mmLocation: CivrayEquipment ...

1600 hL – Hermex – Flat-bottom fibreglass tankUsed Hermex fibre tank, with a capacity of 1600 HL, designed for the storage of liquids in the wine, agricultural or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its pumping tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristicsType: vertical storage tankBrand: HermexCapacity: 160,000 litersMaterial: fiberConfiguration: vertical cylindrical tankRoof1 chimney chimney with stainless steel hatchFerrule1 oval autoclave door1 taster tap1 e ...

610 hL (260 + 175 + 175 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legsTechnical characteristicsVertical cylindrical tank on feetBrand Martinez SoleFlat bottom tank on superimposed legsCapacity: 260 hl + 175 hl +175 HLMaterial: 304Interior finish: cold rolled rawExterior finish: BLAF2BYear 2003SOLD without accessories, valves or doorsRoofCentral chimneyHatch Ø 500 with clamping studs1 winding pipeGangway support FerruleDoor 1000 x 800 stainless steel door with guillotine opening, with mud flapIn clear draft, stainless steel ball valve Ø 70Stainless steel tasterChannel thermoregulation circuit 8 m21 level with stripBottomSelf-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70RoofOff-centre chimneyHatch Ø 500FerruleDoor 310 x 420 oval stainless steel autoclave with internal openingIn clear, stainless steel ball  ...

9.5 hL – NEW – Stainless steel 304 cylindrical-conical fermenter tank closed on feetNew equipment. Technical dataEffective capacity: 950 litresConical cylindrical bottomTop hatch with quick-release closure diameter 400 mmStainless steel safety valve in DIN 50Winding column with removable washing ball and butterfly valve 2\" Tri-ClampLadder supportCooling jacket H. 500 mmThermometerStainless steel taster DIN 15Clear draught on the cone with stainless steel butterfly valve 2\" Tri-Clamp connection4 adjustable feet with reinforcement barsTotal drain with 90° elbow + stainless steel butterfly valve 2\" Tri-Clamp connectionSocket for PT 100 probe2 lifting rings Exteriorfinish: brushedInterior finish: BA polished weld pickled passivatedMaximum pressure on honeycomb type belt: 3 barsDimensionsTotal height: 2345 mmDiameter: 1080 mmThickness: 20/10thLocation: Monteux (84)Equipment sold load ...

165 hL – Chalvignac – 304 stainless steel tank flat bottomThis CHALVIGNAC stainless steel tank with a capacity of 165 hL is designed for the storage of liquids. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a total emptying with a decanter elbow and filtration grid, as well as a complete control and withdrawal equipment, makes it a robust second-hand solution that can be immediately used to supplement an existing storage capacity. Technical characteristicsBrand: CHALVIGNACMaterial: stainless steelTotal capacity: 16,500 litresRoof1 chimney centred with stainless steel hatch1 ferrule footbridge support1 ladder support1 rectangular door flush with the bottom1 tap and level strip1 taster tap1 winding columnBottomFlat bottom1 total drain valve with decanter elbow and filtration gridDimensionsDiameter: 2600 mmHeight: 3800 mmLocation: CivrayEquipment sold  ...

90 hL – Ruralinox – 304 stainless steel tank conical bottom on feetThis RURALINOX stainless steel storage tank with a capacity of 90 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a conical bottom on legs, a closed conical roof and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical stainless steel tank closed on legsBrand: RURALINOXCapacity: 9,000 litresMaterial: stainless steelRoofConical roof1 central chimney with stainless steel hatch DN 500 mmLifting rings. Shell1 door bar1 rectangular door 530 x 420 mm external opening1 tap and level strip1 taster tap. BottomConical bottom with Boilard1 DN 40 tap1 stainless steel ball drain valve DN 40 Mâcon on square ...

107 hL – Lejeune – 304 stainless steel tank on legsThis LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tankBrand: LEJEUNETotal capacity: 10,700 litresMaterial: stainless steelRoof2 lifting ringsChimney ChimneyShell1 ladder support bar1 taster tap1 rectangular door1 partial drain valve on square flangeBottomConical1 total drain valve on square flange4 feet stainless steel with lifting eyeDimensionsDiameter: 2200 mmHeight: 4200 mmLocation: CivrayEquipment sold loaded on truck: additional mandatory dismantling and loading fees appl ...

125 hL – Vautier – Stainless steel tank 304 flat bottomTechnical characteristicsCylindrical vertical flat bottom closedBrand : VAUTIERVolume : 12 500 LMaterial : stainless steel 304RoofFlat roof1 central hatchLifting ringsMarcs sprinkler in addition1 bolted footbridge, but half level weldedFerruleRectangular door with external opening 550×430 mmPartial ball drain valve on square flange in MÂCON 40Taster tapLadder support barBuilder's plateBottomTotal ball drain valve on square flange in MÂCON 40Flat bottomDimensionsDiameter: 2400 mmHeight: 3400 mmLocation: Monteux (84)Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-264