other machines and plants used for sale (22,264)

220 hL – 1993 Stai – 316 stainless steel tank on legsThis STAI 316 stainless steel storage tank with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on closed legs, combined with a flat bottom and simple racking and control equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical dataCylindrical vertical on closed legsBrand: STAIYear: 1993Total capacity: 22,000 litresMaterial: stainless steel 316Roof1 chimney centredLifting ringsFerrule1 rectangular door external opening 530 × 420 mm1 level valve and ruler1 partial drain valve with ball valve DN 70 MÂCON1 taster tapFlat bottom1 total ball drain valve DN 70 MÂCON4 feet height 500 mmDimensionsDiameter: 3000 mmHeight: 4300 mmLocation: Monteux (84)Equipment sold loaded o ...

1600 hL – Hermex – Flat-bottom fibreglass tankUsed Hermex fibre tank, with a capacity of 1600 HL, designed for the storage of liquids in the wine, agricultural or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its pumping tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristicsType: vertical storage tankBrand: HermexCapacity: 160,000 litersMaterial: fiberConfiguration: vertical cylindrical tankRoof1 chimney chimney with stainless steel hatchFerrule1 oval autoclave door1 taster tap1 e ...

500 hL – Cidec – Flat-bottom fibreglass tankCIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristicsBrand: CIDECTotal capacity: 50,000 litresMaterial: fibreglassConfiguration: vertical cylindrical tankRoofDomed roof1 chimneyShell1 taster tap1 tap and level strip1 stainless steel partial drain valve1 oval doorBottomFlat bottom with box1 stainless steel total drain valveDimensionsDiameter: 3000 mmHeight: 9000 mmLocation: Bollène (84)Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to ...

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed airTechnical dataType: P-EG 0768Max. working pressure: 10 barTest pressure: 18.3 barMaterial: stainless steel 304 (1.4301)Operating temperature (gas, air): -25/+150 °CVolume: 77 litresAcc. classification to 2014/68/EU for fluids group 2Flange connection: DN150The P-EG filter housings have been developed for the purification of compressed air, technical gases and steamDimensions & weightHeight: 1410 mmWidth: 480 mmWeight: 70 kgLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-280

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed airTechnical dataType: P-EG 0768Max. working pressure: 10 barTest pressure: 18.3 barMaterial: stainless steel 304 (1.4301)Operating temperature (gas, air): -25/+150 °CVolume: 77 litresAcc. classification to 2014/68/EU for fluids group 2Flange connection: DN150The P-EG filter housings have been developed for the purification of compressed air, technical gases and steamDimensions & weightHeight: 1410 mmWidth: 480 mmWeight: 70 kgLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-282

530 hL – 1994 Hermex – Flat-bottom fibreglass tankUsed Hermex fibre tank, with a capacity of 530 HL, designed for the storage of liquids in the wine, agriculture or agri-food sectors. Thanks to its vertical construction, flat bottom and large capacity, this tank optimises storage while limiting the footprint on the ground. It is equipped with an oval autoclave door facilitating access to the inside of the tank for inspection, cleaning and maintenance operations. Its chimney with stainless steel hatch, its taster tap, its winding tube and its total drain tap on flange make it a functional and immediately usable solution to complete a storage installation. Technical characteristicsType: vertical storage tankBrand: HermexYear: 1994Capacity: 53,000 litersMaterial: fiberConfiguration: vertical cylindrical tankRoof1 chimney chimney with stainless steel hatchFerrule1 oval autoclave door1 ta ...

45 hL – Brauthite Mirror – Flat-bottom fiberglass tankThis 45 hL BRAUTHITE MIRROR fiber tank is designed for the storage of liquids in wine, brewing, cider and water recovery environments. Its configuration, combined with a closed vertical cylindrical tank, a flat bottom, a conical roof and simple racking and control equipment, makes it a robust and immediately usable second-hand solution to complete an existing storage capacity. Technical characteristicsBrand: BRAUTHITE MIRRORMaterial: fibreglassTotal capacity: 4,500 litresConical roofwith central tap2 lifting ringsFerrule1 taster tap1 oval stainless steel autoclave door1 steel level tap and level strip1 galvanized steel partial drain valve on 100 x 100 square flange with DN 40 MâconFlat Bottom outlet 1 100 x 100 square flange total drain valve with DN 40 Mâcon galvanized steel valveDimensionsDiameter: 1500 mmHeight: 3500 mmLocati ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating capNew material. Technical characteristicsModel: SPAIPSER5000Material: 304 stainless steelTotal capacity: 4,880 litresBottom: sloping flat, slope 4%Roof: floating capInterior finish: bright annealingExterior finish: brushedRoof2 vacuum lifting rings1 floating cap 316L stainless steel with complete pneumatic systemValve. Ferrule1 jib crane1 lifting winch1 ladder support1 rectangular door 420×530 mm at the bottom of the ferrule with external opening1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper1 tasting tap on DIN 15 tap1 needle thermometer1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube)4 coil towers with 2.15 m² exchange surface on the ferrule2 coil towers with 0.75 m² exchange surface arou ...

225 hL (91 + 134 hL) – Pierre Guerin – Stainless steel 304 shell compartmentalized tank with sloping flat bottomTechnical characteristicsBrand Pierre GuerinCapacity: 134 hl + 91 HLTotal capacity: 22,500 litersMaterial: 304 LInterior finish: raw cold rollingExterior finish: brushedRoof1 central chimney with stainless steel hatch DN 500 mm with clamping studs1 50 Mâcon tap on chimney, internally / externally threaded2 lifting ringsFerrule gangway support1 rectangular stainless steel door 410 x 530 mm with external opening with mud flap1 partial drain valve with stainless steel ball DN 50 with decanter elbow1 stainless steel taster8 turns of shell circuit1 stainless steel ball drain valve DN 50Roof1 chimney off-centre at the front with stainless steel hatch DN 500 mm with clamping studs1 tap 50 Mâcon on chimney, threaded inside / outsideFerrule1 rectangular stainless steel door 410 x  ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2%ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristicsFlat bottom tank inclined 2%Brand: ALFA LAVALTotal capacity: 30,200 litresMaterial: stainless steel 316 LInterior finish: Cold rolled rawExterior finish: Cold rolled rawThermoregulatedConical roof1 eccentric chimney at the front Ø 200 mm2 Stainless steel flags1 thermometer6 lifting ringsFerrule1 oval door 310×420 mm1 partial drain valve DN 651 tap for level probeFlat bottominclined 2% with housing1 total drain valve with plugDimensionsDiameter: 2800 mmTotal height: 6000 mmFerrule height: 4800 mmConical upper dome: 5 ...

Bucher PM20 – Pigtail pump 20 t/hThis BUCHER spiral pigtail pump with a maximum capacity of 20 t/h is designed for the transfer of harvests and loaded products in the wine and agri-food environment. Its configuration on wheels, combined with a helical pumping technology adapted to the reception of the harvest and the transfer of the pomace, makes it a simple, robust and immediately usable solution to complete a pumping installation in the cellar. Technical dataPigtail helical pumpBrand: BucherType PM20Level sensorBoers outlet Ø 120 mmMax capacity: 20 T/hWheeled assemblyDimensionsLength: 2100 mmWidth: 700 mmHeight 900 mmTank size: 650×650 mm, height 370 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-330

90 hL – Ruralinox – 304 stainless steel tank conical bottom on feetThis RURALINOX stainless steel storage tank with a capacity of 90 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a conical bottom on legs, a closed conical roof and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical stainless steel tank closed on legsBrand: RURALINOXCapacity: 9,000 litresMaterial: stainless steelRoofConical roof1 central chimney with stainless steel hatch DN 500 mmLifting rings. Shell1 door bar1 rectangular door 530 x 420 mm external opening1 tap and level strip1 taster tap. BottomConical bottom with Boilard1 DN 40 tap1 stainless steel ball drain valve DN 40 Mâcon on square ...

Set of 5 DN 125 3-way valves in bronzeSet of 5 identical valves (description and photos valid for each valve). This 3-way valve in bronze DN 125 is designed for bypassing, distribution or fluid circuit change operations in wine, brewing and cider environments. Its 3-way configuration makes it a simple and robust second-hand solution to complete an existing transfer or process line. Technical dataType: 3-way valveNominal passage: DN 125Material: bronzeCondition:used Nominal diameter: 125Equipment3-way valve bodyin bronze Configuration for orientation or flow distributionDimensionsTotal length: 440 mm (with wrist)Total width: 270 mmTotal height: 270 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-220

50 hL – Conical bottom fiber tank on legsDimensionsDiameter: 1700 mmHeight: 3600 mmLocation: CivrayEquipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-265

120 hL – Dabrigeon – 304 stainless steel flat bottom tank with casingThis DABRIGEON stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a casing with a total drain valve and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical dataBrand: DABRIGEONMaterial: stainless steelTotal capacity: 12,000 litresVertical cylindrical storage tank with flat bottomRoof1 chimney chimney DN 500 mm2 lifting ringsFerrule1 ladder support bar1 partial drain valve1 taster tap1 rectangular door in the middle of the ferruleBottomFlat bottom with Boitard1 total drain valveTank on concrete baseDimensionsDiameter: 2400 mmHeight: ...

Model: VP-2016 Machine Type: CNC Vertical Machining Center (likely gantry/portal style based on earlier photo) Origin: Plate suggests Asian manufacture (likely Taiwan/China OEM) Electrical Specifications Voltage (A.C.): 380 V ±10% Phase: 3-phase Frequency: 50 Hz Installed Power: 55 kVA Hydraulic & Pneumatic Hydraulic Pressure: 75 kg/cm² (~73 bar) Air Pressure: 5 kg/cm² (~5 bar) Tool clamping ATC operation Counterbalance / auxiliaries Machine Weight: ~25,000 kg (25 tons) Heavy-duty structure Likely gantry / bridge-type machining center Travels X: ~2000 mm Y: ~1600 mm Z: ~1000 mm Spindle Taper: ISO 50 Speed: 6,000 rpm Power: ~15 – 30 kW Tooling Automatic tool changer (ATC) Magazine: typically 40 tools Structure Fixed table, moving gantry or column Designed for: Molds & dies Medium-large plates Structural parts Auction-ID: A1-51153-35

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating capNew material. Technical characteristicsModel: SPAIPSER5000Material: 304 stainless steelTotal capacity: 4,880 litresBottom: sloping flat, slope 4%Roof: floating capInterior finish: bright annealingExterior finish: brushedRoof2 vacuum lifting rings1 floating cap 316L stainless steel with complete pneumatic systemValve. Ferrule1 jib crane1 lifting winch1 ladder support1 rectangular door 420×530 mm at the bottom of the ferrule with external opening1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper1 tasting tap on DIN 15 tap1 needle thermometer1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube)4 coil towers with 2.15 m² exchange surface on the ferrule2 coil towers with 0.75 m² exchange surface arou ...

140 hL – Closed 304 Vertical Cylindrical Stainless Steel Tank on FeetThis 304 stainless steel storage tank with a capacity of 140 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical on legsVolume: 14,000 litresMaterial: stainless steel 304RoofEccentric chimney with hatch2 lifting ringsFerrule1 ladder support bar1 taster tap1 rectangular door with external opening1 partial drain valve on square flangeConical bottom1 total drain valve on square flange4 feet stainless steelDimensions Diameter: 2500 mmTotal height: 4000 mmLocation: CivrayEquipment sold loaded on truck: additional mandatory disassem ...

396 hL (285 + 111 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slabVertical storage tank in TEC INOX stainless steel of 396 hL, divided into 2 independent compartments (285 hL and 111 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical dataBrand: TEC INOXTotal capacity: 396 hL (285 + 111 hL)Construction: 304 food-grade stainless steelType: compartmentalized vertical storage tankFlat bottom with 2% slopeLayout: on concrete raftPrevious use: wineEquipment per compartment1 oval door stainless steel autoclave 310 × 420 mm1 level indicator1 total emptying1 partial emptying1 stainless steel chimney Ø 200 mmDimensionsTotal height: 6,000 mmLocation: Bollène (84)Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: A1-51122-365

107 hL – Lejeune – 304 stainless steel tank on legsThis LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tankBrand: LEJEUNETotal capacity: 10,700 litresMaterial: stainless steelRoof2 lifting ringsChimney ChimneyShell1 ladder support bar1 taster tap1 rectangular door1 partial drain valve on square flangeBottomConical1 total drain valve on square flange4 feet stainless steel with lifting eyeDimensionsDiameter: 2200 mmHeight: 4200 mmLocation: CivrayEquipment sold loaded on truck: additional mandatory dismantling and loading fees appl ...

Stainless steel screw drip – 150 mm / 2,670 mm screwdrip used stainless steel screw drip, designed to facilitate devatting and evacuation of the pomace / harvest after fermentation. Compact and easy to integrate into a reception or work area in the cellar, it allows for regular mechanical transfer. Technical characteristicsType: duner / screw extractorConstruction: stainless steel screwFunction: extraction and conveying of the pomace / harvest to an outlet (press, skip, pump, conveyor, etc.) Receiving tank: optimised inner section to guide the material towards the auger DimensionsLength of the screw: 2,670 mmInner width of the bin: 195 mmDepth of the bin: 225 mmTotal footprintTotal length: 3,300 mmTotal width: 330 mmTotal height: 470 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-363

50 hL – 304 stainless steel tank flat bottom on legsThis closed vertical cylindrical stainless steel tank with a capacity of 50 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a conical roof, a flat bottom on stainless steel legs and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsCapacity: 5,000 litresMaterial: stainless steelRoof1 chimney off-centre at the front with stainless steel hatch DN 500 mm1 winding rod on chimney returning to the side of the tank, exit DN 50 mmLifting ringsFerrule1 ladder support bar1 taster tap1 door bar1 rectangular door 530 x 420 mm external opening1 partial drain valve on square flange 100 x 100 mm, stainless steel ball DN 40 MâconFlat bottom1 ...

Stainless steel waterfall for aeration of wines on wheelsStainless steel cascade dedicated to the aeration of wines, ideal for supporting certain cellar operations (racking, transfer, preparation before blending) by promoting controlled contact with the air. A simple, mobile and practical equipment to be integrated from time to time on a line or at the end of pipes. Technical characteristicsType: Stainless steel cascade for wine aerationMaterial: Stainless steelMobility: On wheelsEquipment: 1 valve on round flange DN 60DimensionsTotal length: 2380 mmLength of the tank 2100 mmTotal width: 700 mmDepth of the tank: 240 mmTotal height: 1100 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-362

10 hL – 304 stainless steel tank flat bottomThis vertical cylindrical stainless steel tank with a capacity of 10 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat bottom, a closed flat roof and simple emptying equipment, makes it a robust and immediately usable second-hand solution to complement a small existing storage capacity. Technical characteristicsMaterial: stainless steelTotal capacity: 1,000 litresClosed vertical cylindrical tank with flat bottomRoof1 round hatch diameter 200 mmShell1 drain valve at the bottom of the tankConnection not GAS 1\"1/4Flat bottomDimensionsDiameter: 960 mmHeight: 1600 mmDimensionsDiameter: 960 mmHeight: 1600 mmLocation: Monteux (84)Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-243

500 hL – Cidec – Flat-bottom fibreglass tankCIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristicsBrand: CIDECTotal capacity: 50,000 litresMaterial: fibreglassConfiguration: vertical cylindrical tankRoofDomed roof1 chimneyShell1 taster tap1 tap and level strip1 stainless steel partial drain valve1 oval doorBottomFlat bottom with box1 stainless steel total drain valveDimensionsDiameter: 3000 mmHeight: 9000 mmLocation: Bollène (84)Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to ...

Grundfos CR 16-30 – Vertical multistage pump 16 m³/h GeneraldescriptionVertical multistage in-line pump for the transfer of clean liquids. Industrial design recognized for its reliability, hydraulic efficiency and compactness. Model suitable for continuous applications in agricultural, vineyard or industrial environments. Manufacturer identificationBrand: GrundfosSeries: CRType: CR 16-30Manufacture: DenmarkHydrolic characteristicsNominal flow rate: 16 m3/hPressure head: 34.4 mCERotational speed: 2,000 rpmMaximum permissible pressure: 16 barInstallation direction: VerticalInlets/outlets: In-line flanges (opposite suction/discharge)ConstructionStainless steel pump body (typical CR series)Vertical multistage stagesCast iron base with fixing holesLongitudinal tie rodsGrundfos standard mechanical sealVertically mounted electric motor (three-phase - motor plate to be confirmed if required)C ...

180 hL – 1956 Bignier Schmid-Laurent – 316L stainless steel tank with conical bottom on skirtThis BIGNIER SCHMID-LAURENT 316L stainless steel storage tank with a capacity of 180 hL is designed for the storage of liquids in a fine chemical environment. Its configuration, combined with a vertical cylindrical design on a steel skirt, a conical bottom and an off-centre chimney with hatch, makes it a robust second-hand solution that can be used immediately to supplement an existing storage capacity. Technical characteristicsVertical cylindrical on steel skirtBrand: BIGNIER SCHMID-LAURENTTotal capacity: 18,000 litresYear: 1956Material: 316 stainless steelRoof2 lifting rings1 offset chimney with hatch Ø 500 mm - 6 tapsBottomConical bottom on 1380 mm steel skirt1 total drain valveDimensionsDiameter: 2650 mmFerrule height: 3530 mmHeight: 5310 mmLocation: Monteux (84)Equipment sold loaded on  ...

610 hL (260 + 200 + 150 hL) – Martinez Sole – Temperature-controlled 304 stainless steel tank with sloping bottom on legsTechnical characteristicsVertical cylindrical tank on legsMartinez Sole BrandFlat bottom inclined tank on superimposed legsCapacity: 260 hl + 200 hl + 150 HLMaterial: 304Interior finish: cold rolled rawExterior finish: BLAF2Byear 2003SOLD without accessories, valves or doorsRoofCentral chimneyHatch Ø 500 with clamping studs1 winding pipeGangway support FerruleDoor 1000 x 800 stainless steel door with guillotine opening, with mud flapIn clear draft, stainless steel ball valve Ø 70Stainless steel tasterChannel thermoregulation circuit 8 m21 level with stripBottomSelf-emptying spoon bottomIn total emptying, stainless steel ball valve Ø 70RoofOff-centre chimneyHatch Ø 500FerruleDoor 310 x 420 oval stainless steel autoclave with internal openingIn clear, stainless s ...

120 hL – Ruralinox – 304 stainless steel tank conical bottom on legsThis RURALINOX stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a conical bottom on legs, a closed conical roof and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristicsVertical cylindrical tank closed on legsBrand: RURALINOXCapacity: 12.000 litresMaterial: stainless steelRoofConical roof1 chimney chimney DN 500 mm with stainless steel hatch and 1 chimney tap LiftingringsFerrule1 door bar1 rectangular door 530 x 420 mm external opening1 tap and level strip1 taster tap1 stainless steel partial drain valve on square flange with DN 40 Mâcon valveBottomConical bottom ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirtThis 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristicsBrand: VAUTIERTank with sloping bottom on skirtCapacity: 28,900 litresMaterial: stainless steel 304Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18RoofCentral chimney height 500 mmFerruleDoor 600×800 with mud flap 850 mm from the ground with winch systemValve in 702 Valves in 50Winding pipes in 70 and 50 12regulation rings1 taster1 dial thermometerBottomSloping bottom 22°DimensionsDiameter: 340 ...