other wood working machines used for sale (1,522)

plate thickness: 4 mmblade length: 150 mmcutting angle: 30-120 °Table dimensions: 1000x650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feeding device / bunker for logs, friezes etc. Filling of the bunkers with a forklift from the front Bunker capacity: approx. 5 m3 Logs, friezes or the like can be filled in bulk. The application is carried out via a hydraulically swivelling tilting device. Various conveyors are included in the scope of delivery. These are 2 identical lines that are also offered individually. 1 line was in use for about 1/2 year, the 2nd line is as good as new. See photos

I am selling a disassembled Kovos SR 4 dryer without electronics. Without thermal insulation (glass wool) 2x fans, 2x heating coils. Dimensions of the dryer: Exterior height 3.2 m x width 4.1 m x length 4.55 m, interior height 2.1 m x width 3.8 m x length 4.1 m. The dryer is complete, it is possible to visit it partially built. Described parts for assembly. Material aluminum, very good condition. It was stored in the hall for 15 years.

Width rotor 1,300 mm Rotor diameter 370 mm Number of shafts 1 Main motor 22 kW Gate valve hydraulic Single blade interchangeable Loading from above Crushing tool Reversible knife

0: mm0: 2800 m³/h0: 5000 paFilter capacity: 14 m²Motor output: 5,5 kW0: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Adolf multi-purpose machine 1.Saw 2. Planer Width 500mm 4-knife shaft Length of the tops 195cm 3.Slotting and drilling machine Machine weight 750kg

PRIMULTINI sharpening machine for band saw blades, complete with trestles. Machine not CE compliant, for export

RB sharpening machine for band saw blades, complete with stands and additional electrical panel. Machine not CE compliant, for export

: 1100x1000 mm: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: mmWorking width: mmWorking height: mmSchmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1 Pos. 1 - Article 12.01.02.10520------------------------------------------with chain and Slewing CraneFor handling porous large-sized workpieces.VM-MULTI-400/150 H / 90-1EG1000x675Load 400/150 kgDesign: horizontal pivot 90 °Height: 540 mmControl Arm Length: 1025 mmEye diameter: 5 mmSauggreiferanzahl: 1Suction width: 675 mmSuction length: 1000 mmMotor power: 1.5 KWVoltage (50 Hz): 230 / 400V AC3Voltage (60 Hz): 230/460 V-DrehstomColour: RAL 7035 light grayVacuum Lifting Device VacuMaster Multi-------------------------------------------------- -Type VcuMaster Multi 400 / 150-90 ° -1for the transport of plates with a porousbut also with a dense surface such asraw and laminated chipboardraw and laminated MDF / OSB board,Plastic, plasterboard ..consisting of:Spur gear motor with b ...

5-fold combined joinery machine Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, slewing ring, dressing thickness, planing width 300 mm with three-knife shaft, dimensions tables 310 x 1500 mm, passage height 230 mm, circular saw 0-45° swivel, max. cutting height 100 mm, saw table dimensions 350 x 950 mm travel 1200 mm, saw blade diameter. max. 300 mm, tiller with two speeds 3100 / 6200 rpm, milling mandrel 30 mm, height adjustment max. 110 mm, slotted hole drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm

Nailer OLIMPIA NAILERS model AS1500: – alternate trolley type, pallet size 1500x1500mm – 3 nail boxes, of 10 nails each – 14 clamps mounted + others supplied – hydraulic pump system, HP 10 motor Machine not CE compliant, for export

CAPE nailing line, year 2002, CE standards, consisting of: N° 1) hydraulic belt nailer model CP HO 4200 - 7 m long carpet - with n° 24 pliers - max nail height 120mm - hydraulic power unit - installed power 20 kw N° 1) FANUC robot model M-410 HS with suction cup system for loading material to be inserted into the nailer (installed in 2022) N° 1) aligner transfert N° 1) stamping machine with 4 moulds and relative transfers N° 1) rotary swivel for pallets N° 1) stacker stacker N° 1) Warehouse shutter for pallet rows N° 2) electrical panels with line control and programming display Total length of the line about 40 meters Used line visible installed and running

Pallet line, pallet production, Euro pallets Complete production line for Euro pallets From round timber to finished pallets Debarking Band saw Multi-rip saw Cutting saw Length sorting system Stacking system Conveyors Nail Machines (Böhm & Kruse) and so on.

Mobile cultivator Starchl MK50 FEEDER 450/450 engine diesel 190hp Hours 300

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...

SCM C26 genius 4-fold combination machine Planing width 260 Planing shaft: 3-tersa knife shaft Dressing table length: 1040mm Passage height: 3-200mm Format sliding table: 1070mm trimming length Cutting height: 80mm Saw can be swivelled 90°-45° Rigid milling machine 90° Milling machine rpm: speeds of 4200-6300 rpm or 5000-7500 rpm Engine power: 400V 2 hp S1 260mm planing width! G&STÜ-5500027 Fits in any small workshop!

SCM lab 300p 5-speed station wagon Universal multiple combination Aluminium sliding carriage 3 Tesa planer blade shaft Trimming length 1600mm max. saw blade diameter 315mm with scorer swivelling saw blade Dressing width 300mm Dressing table length 1300mm Thickness table dimensions 300 x 450mm Min./Max. Thickness Height: 3/220mm Motor 50Hz 4kW 400V max. milling tool diameter 160mm Spindle speed: 3600/7500/10,000 rpm Spindle diameter: 30mm Weight 430kg G&STÜ-5500314

0: 300 mm0: max./nom: 6.000/5.085 m³/h0: v.V./nom: 2.950/2.400 Pa paFilter capacity: 36,2 m² m²weight: ca. 1.300 kgDimensions (L/W/H): 3.880 x 1.020 x 2.250 mmDust extractor NE-J 300 3 ton. m. Jet filter regeneration--------------------------------------------------Includin g a new type of extinguishing device with a drop flap and oxygen extraction,5 m cable for junction box, high-efficiency reluctance motor IE5, FU control,Wired 7 color touch panel, automatic start/stop start controland monitoring of up to 10 woodworking machines includedautomatic slide control, integrated emergency stop function and isof course H3 tested.The newly designed model fits into any standard shipping container. The suction nozzlewith injection box and non-return flap is located in the middle of the frontdust extractor. The highly efficient JET filter regeneration guarantees highFilter service life, low fil ...

Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

Remote Mayrhofer SPW-F quick-release car

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Wooden flooring line consisting of: Motorized loading roller conveyor Suction cup loader Sliding table saw/panel saw Multi-blade panel saw Tipper Dry or glue-fitted slats Stackers Packaging machines Parcel loader Packaging Automatic pallet unloading strapping machine Camera-guided movements The loading roller conveyor, the stack (max 50 sheets, thickness 8mm) is transported under the suction cup loader, where the panels are picked up and placed on the hopper of the panel saw. Model:TSA 360A The sectioned sheets go on a 90° sideshift and are conveyed by belts over a suction cup feeder. Here, by means of a camera, by means of the black line, they are centered and introduced into the Paul K34G multi-blade panel saw/multi-blade Paul The sectioned slats (n°10 size 130 size 1300x2x20202) go on a 90° sideshift that transports them to an octagonal tilte ...

Rudnick&Enners Drum Chipper Type: RE-TH 250/650/5 Main motor: 75 kW Inlet width: 700 mm Inlet height 300 mm Feed rollers: 3 bottom, 2 top with control cabinet and metal detector

0: 160 mm0: max./nom.: 1.780/1.447 m³/h0: v.V./nom.: 3.160/2.450 paFilter capacity: 12,3 m²weight: 430 kgDimensions (L/W/H): 1.970 x 910 x 2.070 mmDust extractor NE 160, J pneum. Filter regeneration------------------------------------------------For the extraction and filtering of wood dust and wood chips.GS and H3 testing according to GS-HO-07 (BGHM), vacuum filterwith 2 swivel and 2 fixed castors including suction nozzle, with pneumaticCleaning, 5 m cable with plug and reversing switch, fan includedIntegrated electric motor IE3 400V / 50Hz, with mobile bin and chipcollection bag.Standard is intake manifold on the right / fan on the left. Suitable forstandard Sea containers.Technical data / manufacturer description------------------------------------------------• Volume flow max./nom.: 1,780 / 1,447 m³/h• Operating volume flow: 2,300 m³/h• Negative pressure v.V./nom.: 3,160 /  ...

Polishing machine - brush with 2 rollers used GMB mod. ROLL 1400 CE compliant machine Brush outer diameter mm. 350 Brush length mm. 1400 max Brush rotation speed 970 rpm/1' Worktop length mm. 6000 Useful working length mm. 5500 width of the worktop mm. 1400 Useful working width mm. 1400 total power used HP 33 - Nr. 2 motors each KW 11 (HP 15) with automatic star/delta start -The machine is fingered with two brushes; one is positioned at 90° with respect to the sliding of the table and the other is inclined. The cross-brushing system allows for excellent finishes. - The bench translation speed adjustment is variable, with inverter - Nr. 2 stops placed on the bench that adjust the stroke of the bench - Oscillation of the brushes with nr. 2 gearmotors (possible exclusion from the control panel) - Possibility to start the translation of the plane to the right and left in aut ...

chuck for 25 mm shafts total height 170 mm

Harvester, wood harvester, forest harvester, crane harvester used Manufacturer: FMG Type: 1870 SUPER MASTER Year: 1998 Operating hours approx. 7500 Engine: Volvo Diesel 220 hp Boom: Logolift 200 V 9 m Head: TIMBERJACK 762B Machine drives but we can't test all functions. Repairs to the cutting head may be necessary. Control would have to be reviewed. Dimensions approx. 11 x 3 x 3.7 m

Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new