other wood working machines used for sale (1,427)

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Compressor manufactured in 2018. This BOGE S 111-4 features an air flow rate of 17.10 m³/min and a final discharge pressure of 10 bar. It is equipped with a refrigerated dryer model DS220, manufactured in 2017. If you are looking to get high-quality compressed air capabilities, consider the BOGE S 111-4 compressor we have for sale. Contact us for further details.

Dimensions (L/W/H): 2070x800x2500 mmWeight: 450 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2570x1100x2490 mmWeight: 400 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x800x2500 mmWeight: 400 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 100 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details.

Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details.

Hocker Polytechnick MultiStar JP5 was manufactured in 2012. This used dust extraction system features a powerful 30 kW motor and a filter area of 121.3 m². It includes a Briketierpresse BrikStar c-3 18, designed for efficient operation. If you are looking to get high-quality dust extraction capabilities, consider the Hocker Polytechnick MultiStar JP5 machine we have for sale. Contact us for further details.

Dust extraction and filtration system manufactured in 2018. This Nawara RUBIN 2030 is designed for the extraction of dry dust and wood chips, making it suitable for woodworking and industrial dust collection. It features a stationary modular filter system and a warm air recovery system for continuous operation. If you are looking to get high-quality dust collection capabilities, consider the Nawara RUBIN 2030 machine we have for sale. Contact us for further details.

Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.

Wood production line manufactured in 2017. This BURKLE Optima 1428/50 includes a continuous-action stack press with a pressing area of 1400 x 2800 mm and an automatic feeding system. It also features a robust panel rack and two tilting hoppers with a capacity of 1.5 m³. If you are looking to get high-quality door panel production capabilities, consider the BURKLE Optima 1428/50 machine we have for sale. Contact us for further details.

Wood production line manufactured in 2004. This CEFLA Spraybotic MD features an automatic spray arm with 4 spray heads and a pump station equipped with 5 Graco coating pumps. The passage width is approximately 1350 mm, making it suitable for various coating applications. If you are looking to get high-quality coating capabilities, consider the CEFLA Spraybotic MD machine we have for sale. Contact us for further details regarding this machine.

Edgebander manufactured in 1985. This HOMAG FG63 features a lifting table with pusher, roller conveyor, and feeding unit. It includes a double-end profiler, milling station on both sides, and a glue application unit for efficient profiling and folding of trim strips. If you are looking to get high-quality edging capabilities, consider the HOMAG FG63 edgebander we have for sale. Contact us for further details regarding this machine.

Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details.

Extraction system manufactured in 2022. This SCHUKO Solo-160-2323/30/182/BD features an impressive airflow of approximately 15,500 m³/h, designed for handling dry plastic chips. It includes a total filter area of 182 m² and a filter hose diameter of 160 mm. If you are looking to get high-quality extraction capabilities, consider the SCHUKO Solo-160-2323/30/182/BD machine we have for sale. Contact us for further details.

Compressor manufactured in 2021. This Atlas Copco GA 110 VSD+ features a power output of 114 kW and operates at an adjustable pressure range of 6-10 bar. It includes a refrigerated dryer model FD410VSD, ensuring efficient air compression. If you are looking to get high-quality compressed air capabilities, consider the Atlas Copco GA 110 VSD+ machine we have for sale. Contact us for further details.

Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us.

Edgebander manufactured in 2000. This OTT Pacific V6-F features an edge thickness capability of 0.2 - 6 mm and can handle workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and includes various processing units such as joining mills, a gluing unit, and a polishing unit. If you are looking to get high-quality edge banding capabilities, consider the OTT Pacific V6-F machine we have for sale. Contact us for further details.

Edge banding machine Type: EDGETEQ S-300 Manufacturer: Homag Year: 2020 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Cutting center Type: Cut 6120 Manufacturer: Holz-Her Year: 2010 Control: HOLZHER CUTCONTROL 2 Cutting length: 4400 mm Max overhang of the saw blade:82 mm Main motor: 11 kW (for discs Ø 350 mm) Independent pre-cutting motor: 2.2 kW Feed speed: continuously adjustable up to 100 m/min Dimensions: 9730 x 6450 x 1650 mm Integrated label printer Air cushion tables for easy handling of heavy plates Machine in good condition, fully functional Find more here - / Contact us at -

Code: 0355 Brand: AVOLA - GERMANY Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various – CE Standard Technical data: Lower cross-cut saw with rotating table and tilting blade Vidia blade diameter mm 650 Hole 30 Pneumatically operated safety cover Motor 10 Kw Motor speed 3000 rpm Pneumatic clamping cylinders Pneumatic cross-cut device with two-hand control Electric blade tilt adjustment 90–30° with flat digital display 5–175° Cutting height at 90° 245 mm Cutting height at 45° 164 mm Cutting height at 30° 113 mm Laser cutting guide Table dimensions mm 1500 x 1500 Work table height mm 1000 Handling brackets for forklift truck Right Roller conveyor mm 3000 x 600 - Support guide 5000 mm Left Roller conveyor mm 3000 x 600 - Support guide 5000 mm Overall dimensions of  ...

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark