We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (1)
- Calenders (14)
- Caoutchouc processing machines (3)
- Dosing devices (2)
- Interior blenders (77)
- Rolling mills (68)
- Rubber cutting machines (25)
- Rubber extruders (26)
- Rubber injection presses (34)
- Rubber processing machines (16)
- Rubber testing devices (20)
- more
- AGILA (1)
- Alpha (3)
- Alpha Technologies (5)
- ANKELE (1)
- ARBURG (2)
- AUTOGIL (1)
- AZ VMI (1)
- BAINITE (2)
- BAINITE MACHINES PVT LTD (1)
- BAINITE PVT LTD (1)
- BANDERA (1)
- BARTELL (1)
- Barwell (2)
- BASTON (1)
- BATA (1)
- Berstorff (9)
- BERSTORFF ROTOCURE (1)
- Bipel (6)
- BLACKFRIARS (1)
- BOSCH (2)
- BOY (2)
- Bradley + Turton (3)
- Bridge (2)
- Buzuluk (9)
- BUZULUK KALANDER (1)
- BUZULUK KALANDER-LINE (1)
- C.M.P. (1)
- C2 (2)
- CAMI (1)
- CARTER (3)
- Carter UK (2)
- CEMB STATIC BALANCER (1)
- CEVENINI (1)
- COLLIN (1)
- COLLIN KALANDER (1)
- Collmann (3)
- Colmec (3)
- Comerio (2)
- COMERIO ERCOLE (18)
- CONRAD ENGELKE (1)
- COTTA (1)
- CUMBERLAND (1)
- DANIELS (1)
- DAVID BRIDGE (1)
- DIVERSE (1)
- ECO (1)
- Engel (8)
- ERMAFA (1)
- Farrel (13)
- FARREL - TSRD (1)
- Farrel Bridge (5)
- Farrel Pomini (5)
- FARREL-BRIDGE (1)
- FIRBIMATIC - GLA-WEL (1)
- Fogg + Young (2)
- Francis Shaw (23)
- FRENCH OIL (USA) (1)
- FRITZ (1)
- GALLENKAMP (1)
- GALVI (1)
- GBF Potvel (2)
- Genlab (2)
- GERLACH MASCHINENBAU (1)
- Gibitre (2)
- GUILO (1)
- GUMIX (1)
- HEDINAIR (1)
- HERMAN SCHWABE (1)
- HF (1)
- HF MIXING GROUP (1)
- HF/POMINI (1)
- ICS CHILLER (1)
- Iddon (6)
- IDDON 120MM EXTRUDER (1)
- IDDON 1350 CALENDER LINE (1)
- IDDON BROS. UK (1)
- IROP (1)
- ITAL (5)
- ITALMEC (3)
- ITALMECCANICA (1)
- JOHN MARSHALL (1)
- JOOS (1)
- JR Dare (2)
- JRD BIPEL (1)
- K+K (1)
- KLöCKNER DESMA (1)
- KM (2)
- KOBELCO (1)
- KRAUS MAFFEI BERSTORFF (1)
- KRAUSS MAFFEI BERSTORFF (1)
- LAMPERTI (1)
- LBBC (6)
- LEICA (1)
- LWB Steinl (7)
- MACCHINE GOMMA (1)
- Mapelli (3)
- Maplan (5)
- MARANGONI (1)
- MATTEUZZI (1)
- MAX MÜLLER (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 307)
AGILA 1
Alpha 3
ANKELE 1
ARBURG 2
AUTOGIL 1
AZ VMI 1
BAINITE 2
BANDERA 1
BARTELL 1
Barwell 2
BASTON 1
BATA 1
Bipel 6
BOSCH 2
BOY 2
Bridge 2
Buzuluk 9
C.M.P. 1
C2 2
CAMI 1
CARTER 3
CEVENINI 1
COLLIN 1
Collmann 3
Colmec 3
Comerio 2
COTTA 1
DANIELS 1
DIVERSE 1
ECO 1
Engel 8
ERMAFA 1
Farrel 13
Francis Shaw 23
FRITZ 1
GALVI 1
Genlab 2
Gibitre 2
GUILO 1
GUMIX 1
HEDINAIR 1
HF 1
Iddon 6
IROP 1
ITAL 5
ITALMEC 3
JOOS 1
JR Dare 2
K+K 1
KM 2
KOBELCO 1
LAMPERTI 1
LBBC 6
LEICA 1
Mapelli 3
Maplan 5
MEB 2
Merkle 3
METRONIC 1
MEWO 2
MON TECH 1
Monsanto 2
OTT 1
PALAMINE 1
PEKU 1
PELMAR 1
POMINI 20
PRESCOTT 1
PRODICON 1
PUGNO 1
Reed 2
REP 5
REP G9 1
REPIQUET 1
RIUS 1
ROTAKEM 4
RUBICON 1
RUCKS 1
Rutil 3
SAMCO 1
SAT 1
Scholz 2
SCHUBERT 1
SEMPERIT 1
SEVERAL 1
Shaw 2
SIEMENS 1
STARRETT 1
TERENZIO 1
TRM 1
Troester 8
TRUSIOMA 1
TUNG-YU 1
UNTHA 1
vari 8
VMI 1
Wallace 2
Walzwerk 2
Wickert 2
YATO 1
YIZUMI 1
ZDA 1
ZEPPELIN 1
approved
dealer
dealer
Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.
approved
dealer
dealer
Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.
approved
dealer
dealer
1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor
approved
dealer
dealer
Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.
approved
dealer
dealer
Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.
approved
dealer
dealer
item-No.: 223489
New in: 2000
New in: 2000
used
Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.
approved
dealer
dealer
item-No.: 223485
New in: 1988
New in: 1988
used
Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.
approved
dealer
dealer
item-No.: 177122
used
1 x Francis Shaw Model K6 Intermix, Original year of manufacture: 1977, Rebuilt body fitted by Carter serial no. 242.93, Year: 1993, Hydraulic drop door discharge, Mixing chamber volume: Approx 112 litres Pneumatic hopper, 750HP, slip ring motor, 3ph, 50 Hz through Sturdigear 1460/15.7 rpm reduction gearbox (1000HP rating). Complete with hydraulic unit + operator controls etc and in very good condition.
