accessories for machine tools used for sale (1,891)

diameter: . mmtool adaptor: . length: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mPost boring bars and turning toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mmtable width: 550 mmThickness: 170 mmnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 110 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mtable load: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 900 mmtable width: 600 mmThickness: 100 mmnumber of T-slots: 8 T-slot - width: 12 mmT-slot - distance: 80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mtable load: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport length: 2800 mmband width: 180 mmdayligth: 250 mmwidth: 300 mm0: 1300 mmtotal power requirement: kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 4,6x0,5x1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 610 mmadjustment: 200 +/- mmspindle bore: 102 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 630 mmtotal power requirement: kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 0,63x0,63x0,120 mvery good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: HSK 100The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 5000 mmfloor-plate width: 2000 mmfloor-plate height: 300 mmnumber of T-slots: 8 width of T-slots: 28/48 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6400 mmfloor-plate width: 1875 mmfloor-plate height: 400 mmnumber of T-slots: 6 width of T-slots: 36/64 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 700 mmThickness: 120 mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3500 mmfloor-plate width: 1750 mmfloor-plate height: 400 mmT-slot - width: 340 mmT - slots distance: 250 mmnumber of T-slots: 7 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . lbar: 24 bartotal power requirement: 2,85 kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport length: 4700 mmband width: 450 mmdayligth: 500 mmwidth: 600 mm0: 900 mmtotal power requirement: kWweight of the machine ca.: 2 tdimensions of the machine ca.: 6,7x0,6x1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: . mmweight: . tHeat output capacity: . KWair volumen: m³/hweight of the machine ca.: tdimensions of the machine ca.: mtool taper bore: number: thread pitch: mmtotal power requirement: kWPost mounting screws and threaded rods for T-slot nutsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 630 mmtable width: 630 mmtable load: . ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KNOLL Chip Conveyor + Coolant Tank for DMU 200 TYPE: 375 S-2/100 TOTAL LENGTH (mm): 4350 TOTAL WIDTH (mm): 1180 BELT DIMENSIONS (mm): 1840 x 375

COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Key data: 200 mm

Hydraulics Machine Vise Jaw width 200mm with special jaws Jaw height 67 mm Wingspan 325 mm Wingspan adjustable in three steps Overall height 165 mm Space requirement L - 800 x W - 300 x H - 165 mm Weight approx. 118 kg

Key data: 200 mm

Hydraulics Machine Vise Jaw width 200 mm Jaw height 67 mm Wingspan 325 mm Wingspan adjustable in three steps Overall height 165 mm Space requirement L - 800 x W - 300 x H - 165 mm Weight approx. 116 kg

Key data: 1010 mm, 4000 mm, 1200 mm

Heavy clamping angle Height 4,000 mm Width 1,010 mm Depth 1,200 mm Cheek thickness 90 mm Weight approx. 5,500 kg

Precision wedge shoes BILZ - PKA 4 Payload 7,700 kg screw-on with insulating plate B4 Overall height 63 mm in central position Adjustment range +4 / -6 mm Size 200 x 200 mm Female thread M20 Weight 9.5 kg - New - unused - 6 pieces in stock Unit price

Precision wedge shoes AirLoc Load capacity 25,000 kg detached Insulating plate and anti-slip plate at the bottom Anti-slip plate on the top Overall height 88 mm in central position Adjustment range 13 mm Size 370 x 230 mm Weight 31.8 kg - New - unused - 21 pieces in stock Unit price

Levelling Elements - Machine Stand EFFBE - LevelMount - EFFBE LM 5-55 Maximum static load 4,000 kg Diameter 160 mm Height 35 mm Thread M 16 x 1.5 Leveling height 20 mm Weight 2.2 kg - 95 units in stock - new - Unit price

Levelling Elements - Machine Stand EFFBE - LevelMount - EFFBE LM 6 - 60 Maximum static load 3,200 kg Diameter 185 mm Height 45 mm Thread M 20 x 1.5 Leveling height 20 mm Weight 3.4 kg - 1 piece(s) in stock - new - Unit price

Leveling Elements - Machine Stand AirLoc - AirLoc PRP - 250 Maximum static load 8,000 kg Diameter 260 mm Height 60 mm Thread M 27 x 2 Leveling height 25 mm Weight 8.6 kg - 20 pieces in stock - unit price -

4 Pieces Leveling Elements - Machine Stand AirLoc Maximum static load 4,000 kg Diameter 205 mm Height 54 mm Thread M 24 x 2 Leveling height 25 mm Weight 4.3 kg - 4 pieces total price -

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Linear rail with folding cam Height-adjustable for mounting on hole punches

faceplate diameter: 400 / 450 mmbore: 100 / 120 mmfaceplate - height: 120/165 mmshort taper: Din 55022 7 Gr. 11 Four-jaw face plate.Short taper - design, according to DIN 55022/27, size 11,with 6 studs, reversible top jaws,Baking individually via threaded spindles only individually adjustable.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.