accessories for machine tools used for sale (1,891)

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Compatible machine: up to 350 t - Stroke (Z): 3.000 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Payload: 5 Kg - Driving method: 380 volt async

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Interface: EUROMAP 12 - Compatible machine: up to 350 t - Stroke (X): 900 mm - Stroke (Y): 1.600 mm - Stroke (Z): 3.000 mm - Payload: 5 Kg - Driv

- Tooling rotation: 0 ? -90 ? - X axis: 800 mm pneumatic - Y axis: 1000 mm pneumatic - Z axis: 2000 mm three-phase electric with inverter - Interface: Euromap 67 - Compatible machine: up to 150 t - Payload: 3 Kg

Used machine in good condition. Available for immediate delivery.

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

tool taper: VDI 40 DIN 69880 number: 22 StückA range of tool holders in good condition.Tool holder size: VDI 40, DIN 69880Were used on a Gildemeister CTX 500 E CNC lathe.Quantity:1 driven tool holder, angled design.18 driven tool holders, straight design.3 standard tool holders.Only sold in a package!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mmfeed length: - mmlength: - mmpower capacity: 2 kWWeight: 1300 kgWith control panel HBG 10A guide channel, size of approx. 60 mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: - ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 0,8 x 0,6 x 0,6 mCoolant tank with pump, little used.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 700 250 mmno. of flutes: 5 groove width: 12 mmtotal power requirement: 0 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 700250320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 90 l/mintank contens: 100 lvoltage: 220 / 380 Vtank dimensions ca.: 800 x 380 x 400 mmheight with motor ca.: 900 mmpower capacity: 2,2 kWweight: 57 kgCondition: unchecked: Base: 820 x 390 x 650 mmThe capacity liter is estimated because on the type of the motor is model KMR 90 L 4.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1500 mmplate depth: 1500 mmplate height: 150 mmweight: 1300 kgGERD WOLFF clamping plate 1500 x 1500 x 150 mmIf you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements.T-slots - width: 45 x 22mmT-slot spacing: 250mmNumber of slots: 6x6Edge distance: 125mmCasting quality HT250Flatness less than 0.12 mmSurface machined according to DIN 876/IIIKeywords:Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 4000 mmplate depth: 1500 mmplate height: 310 mmweight: 4930 kgdimensions of the machine ca.: 4000 x 1500 x 310 mmGERD WOLFF clamping plate 4000 x 1500 x 310 mmIf you cannot find the size you need, you can also send us an e-mailwith the completed PDF form (attached). This way, we canmanufacture a clamping plate according to your requirements.T-slot size: 52 x 28T-slot spacing: 300Number of slots: 5Edge distance: 150Weight: 4930 kgCasting quality HT250Flatness less than 0.12 mmSurface treatment according to DIN 876 / IIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate depth: 5000 mmplate width: 1500 mmplate height: 300 mmweight of the machine ca.: 6060 kgrequired space: 5000 x 1500 x 300 mmGERD WOLFF clamping plate 5000 x 1500 x 300 mmIf you cannot find the size you need, you can also send us an e-mailwith the completed PDF form (attached). This way we can manufacture a clamping plate according to your requirements.T-slot size: 52 x 28T-slot spacing: 300Number of slots: 5Edge distance: 150Weight: 6060 kgCasting quality HT250Flatness less than 0.12 mmSurface machined according to DIN 876/IIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 800 x 425 mmno. of flutes: 6 groove width: 14 mmtable length: 800 mmtable width: 425 mmtable load: 0,3 ttotal power requirement: kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 0,80,60,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min: ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces )suitable e.g. for OKUMAbox dimensions approx. 500 x 300 x 200 mmweight approx. 50 kg3 x EPPINGER 4.200.231 drilling and milling head3 x EPPINGER 4.200.289 drilling/milling head1 x Drill- Milling head WTO 4 1 06 1 6006 - 401 x COROMANT 410 1200 72 - 40 drilling and milling head1 x 2-jaw chuck KH 1-40The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm

Various well-preserved face plates Various dimensions

plate depth: 6000 mmplate width: 1250 mmplate height: 200 mmweight of the machine ca.: 4520 kgrequired space: 6000 x 1250 x 200 mmGERD WOLFF clamping plate 6000 x 1250 x 200mmIf you have not found your desired size, you can also send usan e-mail with the completed PDF form. With this, we canhave a plate made for you individually.T-slots - width: 42 x 22 mmT-slot spacing: 200 mmNumber of slots: 6Edge distance: 125 mmCasting quality HT250Flatness less than 0.12 mm.Surface machined according to DIN 876/IIICasting quality HT250Clamping plates - T-slot plates - plate field - milling table - machine tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Leveling shoes L = 220mm W = 140mm H = 80mm gap 30mm width

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley filledContents and equipment see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.range L-W-H: 720 x 580 x 800 mmweight: 100 kg: 100Kg je Lade Stable tool cabinet with 6 drawers, lockable.2 x 75, 4 x 100, 1 x 150 and 1 x 200mmInternal dimensions: 620x450 mm.Maximum load per drawer 100kg!Furnishings:32x boxes 75 x75 mm.16x boxes 75 x 150 mm.8x boxes 150 x 150 mm.12x dividers long32x short dividers1x stacking trayFigure with 8 drawers.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 710 x 510 x 900 mmweight: 52 kg: 5 St.Professional drawer cabinet for workshop equipment.Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm.Inner dimensions of the lower drawer 56 x 43 x 17 cm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.tool trolleywith tool set 272 pieces.See picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

tool clamping area: - mmShipping weight: 22 kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mmtable load: 0,4 ttable height: 160 mmtotal power requirement: 0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,70,80,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 440 x 1000 mmno. of flutes: 5 groove width: 16 mmtotal power requirement: - kWweight of the machine ca.: 210 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.