grinding machines used for sale (2,377)

total power requirement:10,5 kWweight of the machine ca.:4800 kgdimensions of the machine ca.:3000 x 2100 x 2000 mmcentre distance:1200 mmHeight of centres:200 mmgrinding-table stroke max.:X -Achse 1000 mmtable-size:2060 x350 mmz-axis:Querhub 250 mmFeed speed:0,005 - 5 m/min.grinding head - swivable:360 °taper ISO:50 control:Sinumerik System 8 Documents:vorhanden

grinding length:1000 mmgrinding width:250 mmworkpiece height:400 mmtotal power requirement:12 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3.300 x 1.800 x 2.300 mmhydraulic power unit:400 x1000 x 1500 mmcontrol cabinet:2 Stück, 1000 x 1400 x 1500 mm

grinding length:150 mmtotal power requirement:3 x 380 /220 Vweight of the machine ca.:2100 kgdimensions of the machine ca.:1200 x 1700 x 2000 mmgrinding wheel diameter:280 - 350 mmgrinding wheel width max.:20 mmworkpiece diameter:65 - 120 mmworkpiece turning speeds:1,5 -20 U/minDocuments:vorhanden

working width:880 mmworkpiece height:1- 70 mmwork height max.:1000 mmFeed speed:4- 8 m/min.voltage:50 Hz, 400 Vweight of the machine ca.:2.800 kgdimensions of the machine ca.:2500 x 1715 x1675 mmwidth:min. 350 mmSanding cylinder diameter:420 mmelectr. connected load:20 KWRequired air-pressure:1 x R3/ 8 " pressure:5 bartank:des Bandfilter ca.200 lautomatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mmaccessories::9 Bänder Documents:vorhanden

total power requirement:12 kWweight of the machine ca.:4,6 t

total power requirement:16,5 kWweight of the machine ca.:3,8 t

total power requirement:380V, 50Hz, 7,9A kWweight of the machine ca.:1 tdimensions of the machine ca.:4 x 3 m

grinding length:600 mmgrinding width:200 mmtotal power requirement:5 kWweight of the machine ca.:1,4 tdimensions of the machine ca.:3 x 3 m

grinding diameter:4000 mmcentre height:310 mmweight of the machine ca.:17 tdimensions of the machine ca.:10.5 x 3.6 x 1,9 m

working area:10-200-250 mmBar length:605-625 mmdimensions:6.000 x 2.800 mmweight:13,5 tworkpiece external diameter min/max.:5-175 mmgrinding width:605 mmHydraulics and ball screw overhauled 2 years ago

grinding wheel diameter:300 mmvoltage:380 Vtotal power requirement:1,5 kWweight of the machine ca.:310 kgdimensions of the machine ca.:1100x900x1250 mm

grinding length:1370 mmgrinding width:560 mmworkpiece height:800 mmtotal power requirement:50 kWdimensions of the machine ca.:9 mABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

Valve slide production:2 Lidköping centerless grinding machines: Type 46/G and Type 4B/G 1 Comp-Cleaner 1050 washer 2 Kadia 1EMC-1-35AS brushing machines 2 3-Nines extractors 1 Knoll HF1000/6000 coolant treatment system

Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance.

Equipped with LXT 18 V; Disc diameter 125 mm; No-load speed 8500 min-1; Hold-open switch; Restart protection; Disc Ø maximum 125 mm; Cup disc diameter 125 mm; Cup brush diameter 60 - 80 mm; Cone brush diameter 100 - 115 mm; Diameter round brush 100 - 125 mm; Overload protection; Shaft locking; Connection/mounting M14x2 Axle hole disc 22.23 mm; Volts (voltage) 18 V; Battery charge indicator; Soft start; Soft grip; Battery protection Dimensions. LxWxH 362x140x145 mm; Weight with low LXT 18 V battery 2.3 kg; Weight with high LXT 18 V battery 2.5 kg; Sound pressure level (LpA) 79 dB(A); Vibration ah surface grinding with AV handle 6.0 m/s²; Vibration (K) surface grinding with AV handle 1.5 m/s²; Vibration ah surface grinding 6.5 m/s²; Vibration (K) surface grinding 1.5 m/s²; Vibration ah sanding with AV handle 2.5 m/s²; Vibration (K) sanding with AV handle 1.5 m/s²; Vibration ah sandi ...

grinding length:1500 mmweight of the machine ca.:12 tKarstens EMAG H310 Universal Grinding MachineYear of manufacture: 2004Center distance: 1500 mmCenter height: 325 mmReinforced workpiece spindle, load capacity up to 250 kgDriven C-axis for polygon, thread, and eccentric grinding.3 individually mounted grinding spindles.Siemens 840D control system

grinding length:3150 mmgrinding width:800 mmworkpiece height:650 mmtable surface area:3.150 x 600 mmmagnetic clamping plate:3.000 x 600 mmtable load:max. 6 tdimensions of grinding wheel:450 x 100 x 127 mm:22 kWtotal power requirement:70,6 kWweight of the machine ca.:15 tdimensions of the machine ca.:11 x 3 x 2,4 msurface grinding machine,CNC Flachschleifmaschine,coolant device 2.500l,magnetical adhesive force control,semi automatic balancing system,

weight of the machine ca.:6,5 t3 identical machines available from OEM productionThe Junker Jucam 1S 51 is designed for grinding bearings and camshaft bushings (exhaust and intake).Parts are automatically fed and removed via an external loading cell.

Flat deburring machine-Vobhag-MFS-10-0/1-RT-r/2

:FSM 2550 | FSM 3060 | FSM 4080 grinding length:500 | 600 | 800 mmgrinding width:250 | 300 | 400 mmDistance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mmtable-size:250x500 | 300x600 | 400x800 mmmax. table load:250 | 300 | 400 kgtable speed -stepless-:5-25 m/minrapid traverse cross:900 mm/mincross feed:0,1-20 mmcross feed on handwheel:5 mm/Uvertical feed on handwheel:5 mm/Uautom. vertical feed:0,005 | 0,01 | 0,01 mmvertical rapid traverse:450 mm/minvertical infeed, min.:0,001 mmdimensions of grinding wheel:200x20x31,75 | 355x38x127 | 406x50x127 mmspindle speed:2900 | 1450 | 1450 1/minspindle drive:1,5 | 3,7 | 3,7 kWhydraulic motor:0,75 | 0,75 | 1,5 kWweight of the machine ca.:1350 | 1700 | 3250 kgmachine length:2250 | 2650 | 3000 mmmachine width:2250 | 2650 | 2000 mm

:FS 2550 ADP | FS 3060 ADP | FS 4080 ADP grinding length:500 | 600 | 800 mmgrinding width:250 | 300 | 400 mmDistance table/spindle center:500 (Option 600) | 500 (Option 600) | 550 (Option 650) mmtable-size:250x500 | 300x600 | 400x800 mmmax. table load:250 | 300 | 400 kgtable speed -stepless-:5-25 m/minrapid traverse cross:900 mm/mincross feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical feed on handwheel:0,1/0,5/1 mm/U; 0,001/0,005/0,01 mm/° vertical rapid traverse:450 mm/minvertical infeed, min.:0,001 mmdimensions of grinding wheel:180x13x31,75 | 355x38x127 | 405x50x127 mmspindle speed:2900 | 1450 | 1450 1/minspindle drive:1,5 | 3,7 | 3,7 kWhydraulic motor:0,75 | 1,5 | 1,5 kWweight of the machine ca.:2350 | 2500 | 3700 kgmachine length:2680 | 3000 | 3300 mmmachine width:2350 | 2350 | 2650 mmOptimized Structure ? The major parts of KRAFT grinders are manufactured from h ...

:FS-D-NC 120200 | FS-D-NC 120300 | FS-D-NC 120400 | FS-D-NC 120500 grinding length:2000 | 3000 | 4000 | 5000 mmgrinding width:1200/1600 mmdistance spindle nose and table:1000 (Option 1200) | 1000 (Option 1200) | 900 (Option 1100) | 900 (Option 1100) mmmax. table load:5200 | 6340 | 7600 | 8700 kgtable-size:1200 (1600) x 2000 | 1200 (1600) x 3000 | 1200 (1600) x 4000 | 1200 (1600) x 5000 mmtable speeds:1~25 m/mintable guideways:V-Führung automatic cross feed adjustable:0.1 - 40 mm/Hubrapid traverse cross:900 mm/mincross feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mmcross feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mmrapid traverse vertical:300 mm/minautom. vertical feed:0.001 ? 0.1 mmvertical feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mmvertical feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mmspindle speed:1100 1/mindimensions of  ...

:TH-1000 | TH-1250 | TH-1600 grinding diameter:1000 | 1250 | 1600 mmgrinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mmswing diameter:1000 | 1250 | 1600 mmworkpiece weight max.:20 t zwischen Spitzen max. workpiece weight:25 t mit Lünetten | 25-60 t mit Lünetten | 25-60 t mit Lünetten grinding diameter min/max:75-1000 | 150-1250 | 250-1600 mmdimensions of grinding wheel:915x100x304.8 (Option1060x150x508) mmtraverse- head stock:quer: 550 | quer: 780 | quer: 910 mmfeeding of spindle:0.001 mmcross feed autom.:3000 mm/mingrinding spindle speed:500~1500 U/mintraverse- head stock:längs: Spitzenweite + 200mm mmgrinding spindle slide rapid travel:25~6000 mm/mintailstock quill stroke:170 mmtailstock movement:1800 mm/minrotation speed of workhead :5~50 1/mindrive capacity - spindle motor:SIEMENS:40-60 PS x 4 Stück power capacity - workpiece power:SIEMENS:75-100 PS x 6 Stück CN ...

:TH-200 | TH-250| TH-300 grinding diameter:2000 | 2500 | 3000 mmgrinding length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mmswing diameter:2000 | 2500 | 3000 mmworkpiece weight max.:25 t zwischen Spitzen max. workpiece weight:120 t mit Lünetten grinding diameter min/max:250-2000 | 300-2500 | 350-3000 mmdimensions of grinding wheel:915x100x304.8 (Option1060x150x508) mmtraverse- head stock:quer: 910 mmfeeding of spindle:0.001 mmcross feed autom.:3000 mm/mingrinding spindle speed:500~1500 U/mintraverse- head stock:längs: Spitzenweite + 200mm mmgrinding spindle slide rapid travel:25~6000 mm/mintailstock quill stroke:170 mmtailstock movement:1800 mm/minrotation speed of workhead :5~50 1/mindrive capacity - spindle motor:SIEMENS:40-60 PS x 4 Stück power capacity - workpiece power:SIEMENS:75-100 PS x 6 Stück CNC controller:Siemens/Fanuc Brand new CNC roll grinders (with movable grind ...

:HR-400 | HR-600 | HR-800 | HR-1000 grinding diameter max.:450|650|850|1050 mmrotary table dia.:400 | 600 | 800 | 1000 mmdistance horizontal spindle / table:450 | 480 | 500 | 700 mmtable speed -stepless-:20-250 | 10-150 | 10-80 | 10-60 1/minspindle drive:3,7 (5,5 opt.) | 7,5 | 7,5 (11 opt.) | 15 kWspindle speed:1450 1/minvertical feed on handwheel:x1 x5 x10 (MPG)/0.1, 0.5, 1 mm/Uvertical feed on handwheel:x1 x5 x10 (MPG)/0.001, 0.005, 0.01 mm/Udimensions of grinding wheel:355×38×127 | 355x38x127 | 405x50x127 | 500x50x203 mmweight of the machine ca.:2300 | 4200 | 5000 | 12500 kgMachine size (LxWxH):2400x1900x2100 | 2600x1800x2500 | 2800x2100x2500 | 5100x2950x3000 mm:mit Zyklenunterstützung CNC controls from:Siemens/Fanuc/Mitsubishi

:HR-1200 grinding diameter max.:1250 mmrotary table dia.:1200 mmdistance horizontal spindle / table:700 mmtable load:1200 kgtable speed -stepless-:10-50 1/minspindle speed:1450 1/minfeed range - vertical:1000 mm/minvertical feed on handwheel:x1 x5 x10 (MPG)/0.1, 0.5, 1 mm/Uvertical feed on handwheel:x1 x5 x10 (MPG)/0.001, 0.005, 0.01 mm/Udimensions of grinding wheel:500x50x203 mmspindle drive:15 kw Siemens kwtable drive:11 kWweight of the machine ca.:14000 kgMachine size (LxWxH):5300x3150x3200 mm:mit Zyklenunterstützung