meat and fish processing machines used for sale (1,892)

Vacuum filler Manufacturer: Handtmann Model: VF 620 Efficiency: up to 6000kg/h Electric power: 8kW Voltage: 400V 50Hz 3N Filling pressure: up to 40bar Portion range: 5-100.000 g Hopper capacity: 90/240 liters Dimensions: 1350x1950x2100mm Weight: 1400 kg

Vacuum tumbler Manufacturer: Henneken Model: B3 Volume: 1200 liters Electric power: 2.8kW Dimensions: 1130x2225x1675mm

Clipping machine Manufacturer: Poly Clip Model: FCA 3462 Production capacity: 90 cycles/min Voltage: 400V (3+N, 50Hz) Electric power: 3kW Compressed air: 0.5 – 0.7 MPa Maximum closing diameter: 120 mm Dimensions: 1580x1440x2050mm Weight: 595 kg

Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Used autoclave PANZER 340 liters with superheated steam -refurbished- - Control, cover seal, safety valve, pressure gauge, etc. all new. - For sterilizing, preserving, pasteurizing, cooking, curing, and aging. - Autoclave compl. made of high-quality stainless steels, lid with quick-release fastener. - The autoclave is equipped with all safety equipment. - The autoclave was manufactured in accordance with the latest requirements of the current pressure vessel regulation. - All safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain valve, safety outlet valve, etc. are of course installed. - The autoclave is subjected to a construction and pressure test by the TÜV. Corresponding certificates are included in the scope of delivery. - Fully automatic control by F-value controller including operating temperature, core temperature, F-value contr ...

Alexanderwerk Colloid Mill Fine Shredder E75-FN Continuous cutter with stainless steel housing Machine runs absolutely smoothly and smoothly Funnel made of stainless steel, easily removable The cutting gap can be infinitely adjusted via funnel, thus individual fineness of the product can be achieved Machine has the usual signs of use and is in good condition, but must still be thoroughly cleaned before use. Video about test run available

Ham press IP 320 Control Siemens

120 ltr. stepless with feeder and ejector

1m x 1m 24 floors 2m high 36 stainless steel gratings with perforated plate 480 x 995 mm

-electrically heated, heat output approx. 70 kW for temperatures up to 200 C -Titanium control

Vacuum packer VAMA Specifications: Type: VB 300 230 Volt / 50 Hz / 10 A / 1.6 kW Weight: 40 kg Chamber size: 320 x 350 x 160 mm Sealing bar length: 310 mm Max. bag size: 300 x 350 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 8 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures. 03423-706493

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 3 saw blades Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 10.1 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of manufacture: 2018 RRP with base: approx. EUR 10,000 General: BAKERTOP MIN. Maps Bakery oven / combi steamer from Unox Stainless steel body Low energy consumption due to high-quality insulation Door with double safety glass Air gap prevents strong heating of the outer pane Inner glass pane hinged for cleaning Door with carbon fiber door lock and long curved door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat Height-adjustable screw feet Baking chamber: completely m ...

Manufacturer: Webomatic Type: CD 110 Machine dimension L x B x H: 1140 x 900 x 1050 mm Two cutting-sealing bars: 500 mm Chamber dimensions L x B x H: 650 x 500 x 220 mm Possibility to work with gas Vacuum pump: 100 m3/h Machine cycle: 15 - 40 sec Voltage: 380 V, 50 Hz Power 2.2 kW

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

The SE60 shrink tank is the perfect addition to your Multivac vacuum machine for shrink packaging of traditional products Max Product sizes (W x D x H): 600 x 400 x 180 mm Max weight: 25 kg Machine dimensions (W x D x H): 720 x 680 x 1250 mm Working height: 820 mm Machine weight: 115 kg

Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Compressed air: not required

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A

Manufacturer: Doleschal Type: Smoking chamber Model: dvoja kolica Productivity: 260 kg/h Height: 3000 mm Width: 1910 mm Length: 2290 mm Voltage: 400V 50Hz 3N Power: 48 kW Main material: Stainlees Steel

Height 2120 mm Width 1580 mm Length 2250 mm Weight 1600 kg Capacity 3600 kg/h Power supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless steel, acid-resistant Hopper capacity 240 l Loading Loading integrated into the machine Sausage wrapper Comes complete with the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

Manufacturer: Kilia Type: Grinders Mincer Mixer Height: 1500 mm Width: 1000 mm Length: 1100 mm Voltage: 400V 50Hz 3N Power: 11/15 kW Throat Diameter: 130 mm Main material: Stainlees Steel

Metos Proveno CoolPro 80E combi kettle Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph

REF-2559 BIZERBA A400 FBLA AUTOMATIC SMOKED SALMON SLICER Automatic slicer for smoked salmon, trout and other similar types of fish. Manufacturer: BIZERBA Type: A400 FBLA Year: 2005 Power supply: 230/400 V, 3-phase / 50 Hz / 2.5-1.4 A Overall dimensions: width 1,170 mm, length 1,850 mm, height 1,500 mm

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

Product number: 2948 Type: sect 200 Serial number: 273-00-129 Year of construction: 2023, NEW! Cutting diameter: max 200 x 180 mm Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Including extra knife