other machinery for waste disposal and recycling used for sale (402)

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48") - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - / Contact us at -

Manufacturer: Bonfiglioli Type of Machine : Scrap shear This machine has sustained fire damage. The main structure and the cutting unit remain intact, including the knife, cutting cylinder, and quick-opening function. Find more here - / Contact us at -

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

ANACONDA FTR 200 with CAT 2.8 (55kW) – TIER 5, ANACONDA FTR 200 with JCB Dieselmax (55kW) – Tier 5, ANACONDA FTR 200 with DEUTZ TD 2.9 L4 (50kW) – TIER 5, 20 m long conveyer belt, Bunker standard 6 cm³ with optional increase 10 cm³, Hydraulically foldable rear section, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 4-ply construction., Hopper capacity: max. 10 m³ (with extensions), Variable speeds, Hydraulic support legs for easy setup, Hydraulisch klappbarer Kopfbereich serienmäßig, Easy access to the engine bay, Weight: 14.485 kg – 14.485 tons depending on equipment, Weight with tipping grate: 17,000 kg, Weight with vibrating screen: 18.985 kg, Weight with tipping grate: 17.000 kg, Weight with vibrating screen: 18.985 kg

CAT – 9.3 – STEP 5 (310 kW), FLSMIDTH RAPTOR 250 cone crusher, Direct-drive coupling and pulley, Hydraulic adjustment in closed position and overrunning protection, Maximum suction diameter: 235 mm, Minimal CSS: 6 mm, Hydraulically foldable hopper flap plates, Hopper volume: 6.5 m³, Continuous load and material monitoring, Safety devices as standard, Local lubrication points, Ultraschall level sensor standard, Radio remote control standard, Circulating sieve box 12 ft x 5 ft (3.66 m x 1.52 m), Upper and lower deck, Additional transfer conveyor 500 mm, Maximum intake diameter: 235 mm, Minimal CSS: 6 mm, hopper volume: 6.5 m³

ANACONDA TR100 with CAT 2.8 (55kW) – TIER 5, ANACONDA TR100 with JCB Dieselmax (55kW) – TIER 5, ANACONDA TR100 with DEUTZ TD 2.9 L4 (50kW) – Tier 5, 33 m long conveyor belt, hydraulically foldable inlet and rear area, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 3-ply construction., Weight: 19.000 kg – 19 tons depending on equipment

Series equipment:, ANACONDA DF 514 with CAT 4.4 (110kW) – Tier 5, High-performance screening box 4.27m x 1.52m 2-deck screener, Side tensioned screen deck system (upper and lower deck), Bunker volume of 7.2 m³, Variable speed at bunker belt 4-layer belt conveyor, Screening box angle adjustable between 15–19º, Sieve box paths for maintenance and screen change, Variable speed for main and side conveyors, BUNKER:, Width: 2.7 m, Length: 3.7 m, Maximum volume: 7.2 m³, BUNKER CONVEYOR, Width: 1200 mm, Type: Flat cable, COLLECTION CONVEYOR, Width: 1200 mm, FEED conveyer belt:, Width: 800 mm, Throw height: 3.80 m, MID conveyer belt:, Width: 800 mm, Outlet height: 3.60 m, OVERBONDED TRANSPORT BELT-HECKBAND:, Width: 1200 mm, Outlet height: 3.40 m, length: 3,7 m, Maximum volume: 7,2 m³, width: 1200 mm, Type: Flat ribbon, width: 800 mm, width: 800 mm, Ejection height: 3,80 m

Manufacturer: Paal Model : Konti 275 G Year of Manufacture : 2010 Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

We offer a new unused cable peeling machine from a small German company specializing in recycling machines. The machine is new and unused and can be used for different cable diameters. from 10 - approx. 50 mm the machine is very robustly constructed

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection

Manufacturer: KOMPTECH Model: Crambo 5200 Year of Manufacture: 2015 Type of Machine : slow-speed shredder Operating hours: Approx. 14,000 hours Condition: - Used, good condition consistent with operating hours - Commercially operated - Regularly serviced and maintained (checkbook service) Chassis: - Trailer / 3-axle chassis, transportable - Road approved - TÜV valid until 03/2026 Engine and drive: - 328 kW / 460 hp diesel engine - CAT engine with mechanical drive - Machine weight approx. 27 t Applications: Suitable for roots, green waste, waste wood, stem wood, organic waste Equipment and features: - Overbelt magnet - Remote control - Armored shredding rollers - Rollers in very good condition with low wear - Fixed tools - Roller speed: 22 rpm / 34 rpm - Screen baskets: 220 mm x 140 mm - Standard paint finish - Throughput up to approx. 80 t/h - 3-axle ru ...

Manufacturer: KOMPTECH Model: NEMUS 2700 Year of Manufacture: 2022 Type of Machine : trommel screening machine Operating hours: approx. 3,000 hours Trailer-mounted, 2-axle, transportable Very good condition Used commercially Regularly serviced, maintenance logbook maintained Engine and technical data Engine power: 74 kW / 100 HP Fuel type: Diesel Engine manufacturer: Perkins Drive: Mechanical Operating weight: approx. 17 t TÜV valid until: 12/2025 Road legal approval Applications - Suitable for woody biomass - Organic waste - Commercial and industrial waste Equipment and features - Remote control - Hopper level sensor - Screen drums: 10 mm, 20 mm, 40 mm - Screening area: 30 m² - Standard paint finish - Throughput capacity up to 170 m³/h - 2-axle chassis - Hydraulic support legs - Connect system - Towing device - Hydraulically adjustable hopper pre-sc ...

An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.