other machines for plastic used for sale (424)

n°1 Balacchi BR4SSB PVC welding machine Year 2004 -n°1 Balacchi BR12PT PVC welding machine year 199

USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.

Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible.

On behalf of a customer, we are selling an EVO-tech EL-140 3D printer. The device was used as a dealer demo machine. Number of print jobs: 141, material used: approximately 2100m of filament. The machine is in perfect condition., Installation space in mm (x/y/z): 570 x 450 x 570 mm, Print volume: 140 liters, temperature of the print bed: max. 160°C, temperature pressure nozzles: max. 420°C, print volume: 140 liters, Automatic calibration: Yes: XYZ, Closed Loop Axis System: Yes, Temperature build chamber: max. 100°C, temperature of the construction chamber: max. 100°C, Filament sensor: Yes, Material recognition: Yes, Filament drying: Yes, Independent nozzles: Yes, 2 pieces, Size of the filament spools: 1KG to 10KG, Nozzle cleaning station: Yes, webcam: Yes, Copy mode: Yes, water cooling: Yes, filament sensor: Yes, Magnetic positioning: Yes, material recognition: Yes, filament  ...

Used 3D printer: HP Jet Fusion 580 – industrial-grade color multijet technology, Immediately available and ready for use. Installation service, commissioning, and training available., For sale is a used HP Jet Fusion 580 3D printer in very good condition. The machine is fully functional, regularly serviced and is ideal for professional applications in prototyping, design, product development and small series production – especially where Color parts with high strength and precision are required., ---------------------------------------------------------------, Highlights of the HP Jet Fusion 580:, - Color 3D printing: Print functional components in Full color (CMYK) – ideal for illustrative prototypes and visualization., - High level of detail: Finest resolution for delicate geometries and complex structures., - Fast printing process: HP Multi Jet Fusion technology for  ...

Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping

FBM PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-400 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.germanplas ...

COSTARELLI PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-450 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.ger ...

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and mainten ...

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.

Dalex Welding Press

Feeding unit for Dalex welding press

A T-connector assembly fixture Ruchser for precise and time-saving installation of T-connectors in window or door profiles is available. Usable length: 6000mm, max. mullion width: 250mm, profile supports: 6, clamps: 4, positioning stops: 4, working height range: 950mm-1100mm, machine dimensions X/Y/Z: approx. 6450mm/1200mm/1750mm. Documentation available. An on-site inspection is possible.

Conveyor - Wittmann Feedmax S3-NET / New, unused (6 pcs.) Year of manufacture: 2023 Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

Drying container Piovan 2 x 100 L BJ 1998

SALDOFLEX MODULA M-2011 S, for T-shirt bags, open top bags, sealing width 1.100 mm, min/max bag length: 400/1.200 mm, 3 lanes, Unwinder: 1.700 mm, Film speed: 160 m/min, Cycles: 300 cycles/min, Servo drive, Photocell, Gusseting units, control panel, Constructed in 2007, totally refurbished in 2021, availability: immediate, working width: 1100, conditions: very good, type: T.shirt and open top bags 1.100 max sealing width

Vaporetta VDG 1404 delaminator for separating 3 films connected to each other (carrier film, useful film and protective film). Material width max. 400 mm The still connected foils are passed from a roller through 2 sheets, at the rear edge of which they are separated from each other. The separation is achieved by pulling the foils in different directions. The protective film and the carrier film are rolled up on spindles via slip clutches and disposed of later. The usable film runs through a silicone-coated pair of printing rollers and then into the cutter via various deflections and a dancer that coordinates the laminator with the cutter. The machine can also be used as a sheeter for roll stock to produce sheets from roll stock. With documentation.

Age 1995, For sale outside Europe, Automatic Elevator Tray-feeder, Auto-cross conveyor feeder to main Print Unit, Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System, 8-mandrel Indexing Turret, with Mandrel Holders for Tubs, 6 x individually hinged dry-offset Print Heads., Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Ink Washing System on Print Heads, Positive Suction-cup pick & place and Take-off, 2 x Color Base Printer, 6 kW Jumbo UVITERNO UV Curing Tunnel, Counter/ Stacker station, Max. Container dimension 135 x 180 mm, Max. Printing Length 417 mm, Max. Height of Containers 125 mm, Min. height of Containers 30 mm, Max. speed 9000 containe ...

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...

A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.

Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich.

Bundle offer Markforged 3D printer, consisting of 1 Onyx One 3D printer and 1 Mark Two 3D printer from Markforged in good condition considering its age, with the following accessories:, Equipment:, - 2 pieces of onyx material (2024), unopened, - 5 pcs. glass fiber endless material, (2017), unopened, - 2 dry boxes for material storage, Runtimes/number of print jobs:, - Onyx One: 4980h / 779 print jobs, - Mark Two: 6640h / 750 print jobs, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification:  ...

On behalf of our customers, we offer a used 3D scanner bundle:, - 1 piece Leo 3D Scanner built in 2019, - 1 x Space Spider, year of manufacture 2018, - Usual accessories included (carrying case, power supply, cable), The devices are in perfect condition and were used for testing purposes only.

On behalf of a customer, we are offering an HP4200 MultiJetFusion 3D printer system with a post-processing station and build units. The device comes from a medium-sized company and is in good, used condition. The maintenance contract (3DaaS) was active until 2024., - Number of print jobs: < 1000, Scope of delivery:, - 1 x HP4200 MJF 3D printer, - 1 HP Processing Station, - 2 pcs. Build Units, - various spare parts such as filters etc., Optional services performed by certified HP technicians:, - Professional disassembly and packaging. Delivery in an original HP box (packaging not included, deposit required)., - Installation and commissioning, - Instruction in operation, operation, and aftercare (in English). Duration: 3-5 days, depending on the desired scope, printing technology: HP Multi Jet Fusion Technology, Installation space in mm (x/y/z): 380 x 284 x 380 mm (15 x 11.2 x 15 inches),  ...

ProJet 860Pro ColorJet Printer 3D printer used by 3D Systems for sale., Accessories: Depowdering station, All specifications and operating/installation conditions are in accordance with the manufacturers brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Machine dimensions in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Dimensions machine in mm (wxhxd): 1190x1160x1620

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

Age 2000, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens OP25 display with Touch-pad Controls.

OPTICAL VIS+NIR SORTER, increase the quality of your product with a very economical, highly performant solution., Effective separation: Removes impurities, different colors, and other contaminating materials., Sample memory: Learns from samples to separate based on texture and color., Improved quality: Enhances product quality, ideal for the recycled plastics market., Quick assistance: Fast intervention from an Italian company. 24/7 response and quick intervention and assistance from this small, versatile Italian Company., Suitable for various materials: Can sort PET, HDPE, PP, PVC, PC, ABS, PMMA, and more., Customizable: Available with 1-6 channels., NIR technology: Detects stones, glass, soil, and other dense bodies., Polymer detection: Identifies different polymers using short-waved infrared cameras., A.I. software: Learns from previous selections to improve over time., Compact size:  ...