other wood working machines used for sale (1,509)

BOSCH GBM 10 RE Drill

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Commercial vacuum cleaner KÄRCHER Professional NT 35/1 Tact, max. 2,200 W

Dowel sewn MAFELL DD 40 P

Commercial Vacuum Cleaner MAFELL S 35 M 2020, 1,400 W, S/N 1303511

Folding ladder aluminium 5 steps

Frame saws 5 pcs.

Work and assembly area: wood, self-made, angular approx. 200x200 cm, attached storage area, on the opposite side another workstation approx. 200b cm, both workstations are screwed together, with small contents consumables, drills, etc.

Jigsaw MAKITA 4351 FCT Year 2014

Orbital sander FESTOOL ETS 150/5 EQ built in 2024, max. 150 mm, S/N 41373101

Commercial vacuum cleaner FESTOOL CTL MIDI I, nameplate not visible

Cordless impact wrench MAKITA DHP 459, built in 2009, 1 battery 18V/4.0 Ah

Battery Charger MAKITA DC18RC

Machine vise 130 mm

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark

Sliding Table Saw Milling Machine Planing Machine Slotted Hole Drilling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: BF6-31 YOC 1990 Format sliding carriage 1.6 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Boom table Miter stop Motor power main motor 3 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 3 KW Milling fence with fine adjustment Dressing thickness planing machine Planing width 31  ...

Scrap wood chippers, wood shredders, wood shredders, chippers, slow-speed moving floor chippers overhauled WEIMA Type: WL10 Year of Make: 1993 Rotor diameter 250 mm Motor power 22 KW Rotor length 98 cm Filling funnel approx. 120 x 100 cm Number of blades: 24 pcs. Knife size 30 x 30 mm Sieve 30 mm incl. 2nd sieve 40 mm Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2500 Kg Machine has been overhauled - Rotor shaft remounted. - Paintwork renewed - Sliding rails moving floor renewed - Oils changed - Rotor shaft overhauled (partly new blades and holders) Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the e ...

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -

Edge banding machine Type: Top 2000 Manufacturer: Hebrock Year: 2007 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Italpresse Model: BG/660 Year of Manufacture: 2002 Technical Specifications - Control Voltage: 220 V - Operating Voltage: 400 V - Frequency: 50 Hz - Phases: 3+MP+PE - Maximum Power: 108 kW - Maximum Current: 160 A - Cable Cross-Section (Supply): 70 mm2 - Static Load Capacity: 27,500 daN - Dynamic Load Capacity (with tooling): 36,000 daN Find more here - / Contact us at -

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

JOULIN vacuum lifter, type N1200 4P50

CORDEC automatic outfeed with bundling and stacking, Manufacture year 2025, Automatic ouffeed system for:, - outfeed for single pieces with automatic stacking, - outfeed for manual bundling with automatic stacking, Consisting of:, - Outfeed system with cross transport, - Event end rollers, - Cross transport (liftable), - Bundling station for manual bundling, - Roller conveyor, - Strapping machine, - Roller conveyor, - Paternoster stacking system, - Hydraulic lifting table with cross chain transport, - Cross chain transport for packages

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003