other wood working machines used for sale (1,510)

This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine.

This Barberan MER-P-1400 was manufactured in 2012. It features metering and smoothing rollers, equipped with scrapers and doctor blades, and has less than 100 hours of operating time. Contact us for more information about this machine.

This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine.

This CASADEI Bordatrice E350PM was manufactured in 2022. It features a panel height range of 10-45 mm and supports edge band thickness from 0.4 to 2 mm. The machine operates at a feed belt speed of 7 m/min, with a glue pot heating power of 1490 W. Consider the opportunity to buy this CASADEI Bordatrice E350PM edgebander. Contact us for more information.

This FURNIMATE SAT-660-F its a Finger Jointing line Machine which was manufactured in 2018. It features a machine length of 32,183 mm and a width of 9,294.05 mm. The machine operates with a SAR-1 control system, achieving a carriage forward speed of 40 m/min and a backward speed of 90 m/min. The spindle speed reaches up to 1,795 RPM. Consider the opportunity to buy this FURNIMATE SAT-660-F Finger Jointing line Machine. Contact us for more information.

This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us.

This LINCK VZM & CSMA was manufactured in 2018. It includes a CSMA pull-out device and a VZM centering device, both designed for high-performance in automated production lines. The CSMA offers flexible material guidance with a feed speed of 85 m/min, while the VZM provides precise centering at 84 m/min. Both units feature robust designs for demanding conditions and minimal use, ensuring excellent condition. Contact us for more information about this machine.

This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information.

This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine.

This IMA Novimat Contour I/G80/790/L20 edgebander was manufactured in 2009. It is designed for efficient edge banding applications, ensuring precise and consistent results. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information.

This Wehrmann Combima /K/I/R80/1260/V was manufactured in 2018. A robust single-sided throughfeed postforming machine, ideal for shaping wood and wood materials with laminates in caravan construction and furniture parts. Features include a precision roller chain for reliable workpiece transport and motorized top pressure adjustment. A great opportunity to buy this Wehrmann Combima /K/I/R80/1260/V Wood machine. Contact us for further details regarding this Wood machine.

This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine.

This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15 SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine.

This Giardina RICHFRUITS / NEOMEC / KREMLIN Painting Line was manufactured in 2019. It features a comprehensive system for MDF or HDF boards, including dual circuit spray booths for clear and colored lacquers, designed for water-based UV lacquers. The line includes various elements like spray coating machines, drying tunnels with IR lamps, UV tunnels, and roller conveyors, all driven by KREMLIN pumps and spray guns. Contact us for more information about this machine.

This SCM STEFANI MD edgebander was manufactured in 2021. It features a versatile automatic edge banding capability for solid wood up to 15 mm, with an option for 22 mm. The machine includes an SGP glue pot for both EVA and PUR glues, ensuring a perfect joint line. The Startouch control system offers a 12” touch-screen display, customizable working programs, and graphic simulation of machining. Ideal for high productivity with speeds up to 25 m/min. Contact us for more information.

This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine.

This RENNER RS132D was manufactured in 2018. It features a direct drive compressor, RENNERtronic control system, and an integrated parking heater. Key components include an oil-injected compressor stage, oil filter/thermostat unit, and fine oil separation with sight glasses. Ideal for efficient compressed air generation and management. Contact us for more information about this machine.

This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. Its equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine.

This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine.

This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.

This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information.

This Lange B 85 K edgebander was manufactured in 2013. It features an automatic edge feed, gluing unit, pre-cutting shears suitable for roll material up to 2 mm edge thickness, a pressure zone, cutting unit, and a combination milling station. A surface scraper is also included. Consider the opportunity to buy this Lange B 85 K edgebander. Contact us for more information.

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us.

This SAC F300 was manufactured in 2006. A robust woodworking machine, its ideal for various wood processing tasks. Contact us for more information.

This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine.

This Priess & Horstmann BMA-DLS-CNC was manufactured in 2000. Ideal for woodworking applications, it offers reliable performance for a variety of tasks. Consider the opportunity to buy this Priess & Horstmann BMA-DLS-CNC woodworking machine. Contact us for more information.

This Priess & Horstmann PBA-52M was manufactured in 2000. It is designed for woodworking applications, providing reliable performance for various wood processing tasks. If you are looking to get high quality woodworking capabilities consider the Priess & Horstmann PBA-52M machine we have for sale. Contact us for more information.

This IMA Novimat Systems I/R75/1000 edgebander was manufactured in 2005. It features a robust ICOS OPEN control system, a jointing milling unit with powerful motors, and a versatile multi-functional processing unit for detailed edge finishing. The machine includes a 32-position edge magazine and an advanced gluing unit with an automatic PU melting system. Consider the opportunity to buy this IMA Novimat Systems I/R75/1000 edgebander. Contact us for more information about this machine.

This HOMAG KAL 210 AMBITION 2264 edgebander was manufactured in 2010. It features a max glued edge thickness of 20 mm, edge gluing height up to 60 mm, and a max feed speed of 25 m/min. Equipped with a granulate glue system, preheating zone, and various processing units including a joint trimming and corner rounding unit. Consider the opportunity to buy this HOMAG KAL 210 AMBITION 2264 edgebander. Contact us for more information about this machine.