saws used for sale (1,283)

A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible.

A chain-feed multi-rip saw is offered. Cutting width: 230mm, max. passage width: 650mm, max. cutting height: 130mm, saw arbor diameter: 65mm, min. workpiece length: 450mm, saw arbor speed: 3900rpm, working height: 850mm, max. feed speed: 48m/min. Dimensions: approx. 2700mm/1900mm/2000mm, weight: approx. 2500kg. Inspection by prior arrangement is possible.

Offered is an Altendorf sliding table saw. Max. saw blade diameter: 400mm, max. cutting height at 90°: 125mm, max. cutting height at 45°: 87mm, cutting width: 1000mm, double roller carriage length: 3000mm, saw spindle speeds: 3000/4000/5000rpm, lower dust extraction port: 120mm, upper dust extraction port: 80mm, central dust extraction port: 140mm, riving knife guide slot width: 13mm. Weight: approx. 1100kg. Inspection by appointment possible.

CONTROLS  NC controls SIEMENS S7 TECHNICAL SPECIFICATION  max. diameter of saw blade: 460 mm  cutting capacity round: 146 mm  cutting capacity square: 138 mm  mitre cutting: no   .. oblong: 250 mm  .. .. x: 100 mm  .. to: 220 mm/minDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 1950 mm  total height: 2000 mm  total weight approx.: 2700 kgHigh-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts.With feed conveyor and discharge / vibrating section and extraction system.- max. profile width / height to be processed: 250 / 148 mm- Min. profile width / height to be processed: 10 / 20 mm- Cut-off lengths from 10 mm- Saw blade motor 12/18.5 KW, S6 60%

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 0 - 90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 230 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble-miter band saw- Variable speed control- Miter cuts up to 60° left and 45° right- Vise with quick-clamping mechanism- Blade tension monitoring- Automatic electric cooling systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 100 mmsaw blade turning speeds: 40 / 80 U/mincapacity 90 degrees: square: 90 mmcapacity 90 degrees: round: 100 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tCold circular saw- 45-degree miter cut (one-sided)- Material stop up to 1170 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180 x 100 mmWorking height: 925 mmsaw blade turning speeds: 17 - 70 U/mintotal power requirement: 3,0 kWweight of the machine ca.: tdimensions of the machine ca.: 1,8 x 1,1 x 2,0 mAutomatic cold circular saw- CNC control- Micro-lubrication systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2006 - technically efficient, ready to work – after full service - motor: 3 kW - both cutting discs can be tilted +/- 45 degrees - cutting disc: 450 mm (vertical), 400 mm (horizontal) - cooling and lubrication system - compressed air preparation station - electronic angle indicator for two axes

cutting diameter: 360 mmsaw band length: 6.300 mmcutting width: 700 mmtable height: 800 mmtotal power requirement: 14 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mAutomatic Horizontal Band SawCutting Capacity at 90° (Round): Ø 360 mmCutting Capacity at 90° (Rectangular): 700 x 340 mmCutting Capacity at 75° Mitre (Left & Right):Ø 340 mm / 650 x 340 mmCutting Capacity at 60° Mitre (Left & Right):Ø 340 mm / 600 x 340 mmCutting Capacity at 45° Mitre (Left & Right):Ø 340 mm / 400 x 340 mmMaximum Cutting Diameter: 360 mmMaximum Cutting Width: 700 mmMaximum Cutting Height: 340 mmMinimum Cut-Off Length: 35 mmMinimum Workpiece Size: 10 x 10 x 10 mmRemnant Length (Manual): from 10 mmRemnant Length (Automatic): from 160 mmBlade Tension: 85 barCoolant Tank Capacity: 150 lBlade Speed: 19 – 130 m/minMain Drive Motor: 5.5 kWHydraulic Pump Motor: 5.5 kWCoolant Pump Motor ...

work piece width: 1.200 mmworkpiece height: 500 mmbore diameter: 8 - 40 mmNumber of drilling agregates: 3 Stk.spindle speed:: 150 - 1.100 U / mintool changer: 15 Stksaw blade diameter: 1.430 mmcutting speed: 8 - 30 m/mintotal power requirement: 43 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mWorking CapacityAngle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mmChannel sections: 80 × 45 mm to 400 × 110 mmI-beams: 80 × 46 mm to 600 × 220 mmWide flange beams (HE): 100 × 100 mm to 1,008 × 302 mmSpecial wide flange and welded T-beams: up to 1,200 × 500 mmWorkpiece DataMax. workpiece width: 1,200 mmMax. workpiece height: 500 mmDrilling UnitNumber of drilling spindles: 3 (1 vertical, 2 horizontal)Drilling diameter: 8 – 40 mmSpindle speed: 150 – 1,100 rpmDrilling feed: 0 – 500 mm/minRapid approach: 3,850 mm/minRapid return: 8,000 mm/minPositioning speed: 15,00 ...

A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details.

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

This 3-axis SCHÜCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 min⁻¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÜCO PDG E CUT double mitre saw we have for sale. Contact us for further details.

An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026.

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg

Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Feeder – roller conveyor with shelf 4000 mm - Discharge – roller conveyor with dimension stop 4000 mm

Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical hydr. Metal Clamping + 2pcs hydr Horizontal Metal Clamp - Coolant device - Feeder – roller conveyor with tray 5000 mm - Discharge – roller conveyor with dimension stop and positioning control 4000 mm - Space requirement approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

cutting diameter: 420 mmsaw band length: 4870 mmcutting width: 500 x 250 mmtable height: 640 mmsize of profile - max.: 400 x 400 mmcutting speed: 40 - 120 m/minsaw band length: 4870 x 27 x 0,9 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,0 x 1,0 x 1,5 mManual band sawHydraulic saw blade tensioningHydraulic workpiece clampingHydraulic saw frame lift/lowerIncludes 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

Offer 26154 Technical data: - Cutting range at 90° around 260 mm - flat 410 x 200 mm - Mitre adjustable 90 to 30 ° - Schnittb. at 45° Re + Li round 220 mm - flat 230 x 300 mm - Material support height approx. 620 mm - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed 17 - 106 m/min - hydr.– lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Material vise - Saw blade cleaning brush - Total drive power 400 V / 1.9 kW - Space requirement approx. W 1300 x H 1800 x D 2000 mm - Weight approx. 900 kg

saw band length: 2910 x 27 x 0,90 mmControl: Kasto CompactControll capacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 200 mmcapacity 60 degrees: round: 165 mmcutting speed: 20-110 m/minmin. dia.: 10 mmCutting Length min.: 6 mmtotal power requirement: 2,5 kWweight of the machine ca.: 0,86 tdimensions of the machine ca.: 1,8 x 1,8 x 1,7 mFully automatic band saw (CNC)Includes right-hand roller conveyor with programmable stop carriage & digital display:Stop positioning is handled by the integrated measuring system,with the position shown to millimeter precision on the separate display.Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m.Max. measuring length: 2.30 m.Includes hydraulic clamping and feed unitIncludes coolant systemIncludes work lightIncludes small parts and spare partsIncludes 2 band saw blades ...

length: 380 mm max.band length: 430 mmweight of the machine ca.: 0,5 t: : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mmpneumatic clamping: ja : 46893 weight of the machine ca.: 1,3 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 225 x 32 mmcutting diameter: max. 70 mm bei 90° mmmiter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/minMax. round cutting cross-section at 90°: 70 mmMax. rectangular cutting cross-section at 90°: 80 x 50 mmMax. round cutting cross-section at 45°: 64 mmMax. rectangular cutting cross-section at 45°: 60 x 50 mmSaw blade diameter: 225 mmBore diameter: 32 mmIncludes lubrication systemIncludes base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.