saws used for sale (1,296)

Circular sawing machine. Raw bitsun, unfortunately no technical data.

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104

Wespa band saw. Good used condition. see photos. Blade length max. 4450 mm, blade length min. 4250 mm.

saw blade diameter: 300 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 350 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mCold circular saw- Machine light- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel  ...

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-45834-121

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.

Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details.

Metal Band Saw manufactured in 1999. This KASTO HBA 520/620 U features a working area of approximately 520 x 620 mm and includes a roller conveyor for efficient material handling. With a total length of around 350 cm, this machine is designed for precision cutting in metal applications. If you are looking to get high-quality cutting capabilities, consider the KASTO HBA 520/620 U machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2009. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

saw blade diameter: 400 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: flat: mmturning speeds: 1400 / 2800 U/minengine output: 4,0 kWweight of the machine ca.: 180 Kgdimensions: 1,0 x 0,9 x 1,2 mManuell underfloor aluminum circular sawThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 3800 x 27 x 0,9 mmcutting width: 400 x 260 mmcutting speed: 20 - 90 m/mintotal power requirement: 1,85 kWweight of the machine ca.: 0,62 tdimensions of the machine ca.: 1,8 x 1,6 x 1,5 mSemi-automatic miter band saw- Miter cutting +/- 60 degrees- Coolant system- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Plaintiff HBA 220 BJ 2008

Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

Offer 26100 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm

Offer 26101 Technical data: - Cutting range 29 - 119 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 300 kg - 2 roller conveyors 1500 mm

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor

Key data: 530 mm

Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Offer 26102 Technical data: - Cutting range 140 - 330 mm - Wall thicknesses up to 5 mm - 6 cutting speeds 95 - 230 1/min - Central pipe clamping via handwheel - Man. Rotary drive / cutting drive - Height-adjustable sawing unit - Drive 220 V / 1200 Watt - Space requirement approx. W 900 x H 1000 x D 400 mm - Weight approx. 400 kg - 2 x roller conveyor 1500 mm

An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.

Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.