saws used for sale (1,296)

Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg

Manual underfloor aluminium circular saw Saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m

Machine number: 693601Blade length: max. 3320 mmBlade length: min. 3120 mmTable dimensions: 500 x 500 mmincl. saw blade welder and grindstone

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including model 9312S, 9312, 9430.

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Condition: never used / new (5)

Stored in working order - after a quick test it was not immediately started.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for  ...

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

Equipped with: cutting range 260mm, variable speed, 4 extra saws Auction-ID: A1-41996-87

Dike 0.9 mm. Equipped with micro dosing system, roller conveyor: 5000 x 800 x 1000 mm. Auction-ID: A1-41996-1

: neu : ca. 4 Monate ab Auftragse : Türkei : 27600 €: 527.16 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 15 - 120 m/min: 460 mm: 460 mm: 520 x 460 mm: 585 mm: 0.55 kW: 4 kW: 0.12 kW: 3000 mm: 1200 mm: 1800 mm: 1650 kgRoller feed with manually adjustable stop with micro switchPiece counterLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceMechanical upper clampingPressure adjustmentInverter for stepless blade speedRoller conveyor 1.2 mChip brushOptical height adjustmentOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Automatic Bandsaw Brand: KASTO Model: SSB 260 VA Year of manufacture: 1989 Application: Automatic metal cutting (bars, profiles, solid materials) Equipment: - Hydraulic clamping system - Automatic feed system - Roller conveyor infeed - Integrated control panel with digital display (Minipos 807) - Coolant system (integrated base tank) Technical Data: Voltage: 380 V Frequency: 50 Hz Power: approx. 6.0 kW Condition: Used Auction-ID: A7-45993-76

Make: Danobat Type: Horizontal Band Saw (2-column) Model: CR 260 A Year: 1996 Manufacturer: Danobat S. Coop. Ltd. Technical data: - Cutting type: Automatic horizontal band saw - Saw design: 2-column construction - Cutting capacity: approx. Ø260 mm (typical for model class) - Drive power: 3 kW (according to plate) Equipment: - Hydraulic clamping vise - Automatic feed system - Control panel with display & keypad - Coolant system - Chip tray / collection area - Safety covers and guards Application: - Cutting of steel bars, profiles and solid materials - Workshop and production use Condition: Used Remarks: Signs of wear, paint damage and contamination; functionality not tested Own mass: approx. 1,200 kg Dimensions (LxWxH): approx. 2,450 x 2,000 x 1,800 mm Auction-ID: A7-45993-43

capacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180x70 mm: 110 mm: 95 mm: 135x60 mm: 120 mm: 100 mm: 135x60 mm: 180 mmdimensions of saw-blade: 350x32x3,4 mmturning speeds: 1700/3400 U/minweight of the machine ca.: 600 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmdimensions of saw-band: 4150x27x0,9 mmtotal power requirement: 1,8 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1600x1700x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mmsaw band length: 4400 x 34 x 1,1 mmtable height: 750 mm: 550 mm: 335 mm: 550 x 335 mm: 330 mmcutting speed: 320 x 335 mmdown speed: 200 mmdimensions of saw-band: 200 x 335 mmworkpiece weight: 15 - 150 m/min: 3,0 kWwork height max.: 1500 kgconnected load: 2400 x 2200 x 1900 mmEquipment:- Automatic feed unit- Material end Light barrier- Clamping pressure regulation for automatic machines- Manual saw blade tension- Laser light for cutting line display/scoring saws- Water spray gunThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 €: 590.19 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 570x560 mm: 590 mm: 1.1 kW: 4 kW: 0.12 kW: 500 mm: 1050 mm: 2050 mm: 2242 kgNC controldouble column band saw3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninverterlinear wayoptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 €: 1158.57 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 2.2 kW: 5.5 kW: 0.12 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 23800 €: 456.96 €: Doppelsäulenführung : 5200x41x1,3 mm: 20-100 m/min: 460 mm: 460 mm: 650x460 mm: rund 380 mm, quadrat 380 : 590 mm: 0.55 kW: 4 kW: 0.12 kW: 3100 mm: 1000 mm: 1800 mm: 1520 kgblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear waymaterial limit shaftheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clamping from aboveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 750x540 mm: rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm: 4 kW: 0.12 kW: 3000 mm: 1300 mm: 2150 mm: 2445 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frame3° inclined saw banduser manual in GERMAN or ENGLISH(the vertical hydraulic clamping shown on the photos ist op ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 54900 €: 1037.61 €: Doppelsäulenführung : 5400x41x1,3 mm: 20-100 m/min: 440 mm: 440 mm: 610x440 mm: rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm: 1.1 kW: 4 kW: 0.12 kW: 2850 mm: 2350 mm: 2000 mm: 3600 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 €: 1 : Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 220 mm: 260x140 mm: rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm: 1200 mm: 1100 mm: 1860 mm: 240 kgdemo machine / mint conditionnet price (price for new machine € 6.730,00)manual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61900 €: 1169.91 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 540 mm: 540 mm: 670x540 mm: rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm: 2.2 kW: 4 kW: 0.12 kW: 3100 mm: 2350 mm: 2150 mm: 3800 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 060077 : prompt, Zwischenverkauf v : Türkei : 14200 €: 272.64 €: 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm: 15 - 120 m/min: 320 mm: 320 mm: 450x320 mm: rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2230 mm: 1150 mm: 2140 mm: 1030 kgDouble mitre cuttingInverterSaw blade 34Hydraulic viceHeavy duty gearboxHydromechanic blade tensionSaw band brushDigital read out for mitre angleCoolant equipmentOperating manual in English or GermanOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 01882Cutting length: 300 mmincl. roller conveyorRoller conveyor width: 380 mmRoller conveyor length: 4000 mm Auction-ID: A7-46287-143

380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object

Holder Metabo for Flex 230 mm Length 0.5m Width 0.5 m Height 1.30 m