saws used for sale (1,275)

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 101 mm  length min.: 150 mm  lenght max.: 3000 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 17200 mm  space requirements -front/back-: 5930 mm  total weight approx.: 13000 kgCutting  + brushing  + automatic measuring  + automatic washing and drying  + automatic drying- Number of hours: 25.833- Automatic loader for master tube bundles up to 8000 mm.- Square tube diameters: 10x10 up to 100x100mmProcess: The mother tube, up to 8 meters long, is automatically loaded into the cutting unit, where it is cut to the specified length. It then automatically passes to the deburring unit, followed by the measuring unit, which rejects pieces outside of tolerance and allows the acceptable pieces to proceed to the washing and  ...

cutting diameter: 1000 mmsaw band length: 11100 mmcutting width: 1100 mmtotal power requirement: 20 kVAweight of the machine ca.: 14 tdimensions of the machine ca.: 5,4 x 3,2 x 3,9 mCutting capacity:Ø 1000 mm,W 1100 x H 1000 mmmin. Ø 400 mm, W 400 x 100 mmFace parallelism monitoring: optical display in mmMotor power – band drive: 11.0 kWHydraulics: 3.7 kWCoolant: 0.36 kWCleaning brush: 0.09 kWBand speed: 15 – 120 m/min (infinitely variable)Tank capacity: 115 l (hydraulics)250 l (coolant)Saw band dimensions: 80 x 1.6 x 11,100 mmSpace requirements: W 5366 x H 3215 x D 3863 mmTable height: 820 mmWeight: 14,000 kg – no foundation requiredColor: Red/blackThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply: 380V, 3 ph, 50-60 Hz Spindle speed: 2810 RPM Total power: 1,5 kW Air pressure: 6-8 bar Air consumption: 41 lt/min Min. processable profile length: 100 mm Saw blade outer diameter: Ø350 mm Maximum saw blade height: 100 mm Saw blade bore diameter: Ø32 Saw blade thickness: 3,8 mm Number of teeth: 120 Conveyor: Length: 4000 mm / Width: 350 mm / Both sides. Auction-ID: A1-50595-42

Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø250 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240. Auction-ID: A1-50595-27

Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø275 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240, Min. processable profile length: 150 mm. Cutting blade not included. Auction-ID: A1-50595-7

Offer 26310 Technical data: - Saw blade diameter 380 mm - Mitre adjustment 45° - 90 - 45 ° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Discharge roller conveyor with stop by handwheel + digital display 3000 mm - Roller conveyor feed 6000 mm

roll diameter: 320 mmthroat: 310 mmworkpiece height: 230 mmtable-size: 505 x 505 mmcutting speed: 12 - 375 m/minturning speeds: 39 - 1230 U/minsaw band length: 2460 - 2620 mmvoltage: 400 Vtotal power requirement: 1,3 kWweight of the machine ca.: 420 kgdimensions of the machine ca.: 0,80 x 0,80 x 1,65 mwelding equipment: IDEAL air blow equipment: - Serial-No.: 22600-77/14- with stepless feed- welding equipment IDEAL- grinding wheel- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Make: Behringer Type: HBP 340-700 G Year of Make: 1991 Weight: approx. 1,700 kg -Clamping width: 340 mm x 700 mm -Saw blade: 5800 x 38 x 1.3 -Chip discharge: small conveyor belt -Micro and minimum quantity lubrication -Rotatable foundation frame via handwheel for mitre cuts up to 45° -Hydraulic saw blade guide -Hydraulic clamping jaws -Cutting pressure control valve -Automatic high-gear shutdown -Feed roller conveyor 6 m -Discharge roller conveyor 4 m -Measuring device with stop No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

CONTROLS  Point-to-point control (NC) SIEMENS S7 TECHNICAL SPECIFICATION  max. diameter of saw blade: 460 mm  cutting capacity round: 146 mm  cutting capacity square: 138 mm  mitre cutting: no   .. oblong: 250 mm  .. .. x: 100 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 1950 mm  total height: 2000 mm  total weight approx.: 2700 kgHigh-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts.With feed conveyor and discharge / vibrating section and extraction system.- max. profile width / height to be processed: 250 / 148 mm- Min. profile width / height to be processed: 10 / 20 mm- Cut-off lengths from 10 mm- Saw blade motor 12/18.5 KW, S6 60%-Saw blade feed rate: 220 mm/s-3 × 2 m infeed roller conveyor, total length 6.2 m  -Light barrier for material detection  -P ...

- Roller conveyor 6000 mm- Coolant spray nivelling- Sawing pressure device- Automat End \/ Back Stop 

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

Mössner Record SM 420 / Vertical Band Saw -Projection approx. 410mm -Workpiece height approx. 265mm -Saw blade length approx. 3150-3260mm -Saw band width approx. 16mm - Table size approx. 605x605mm -Tilting work table -Cutting speed 12 - 750 m/min -4x gear stages -Strip welding device -Belt grinding device -Footswitch -Drive power approx. 2 KW -Various replacement saw blades -Documentation Dimensions: LxWxH 0.9x0.9x2 meters / Weight 500 kg

cutting diameter: 200 mmband length: . mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Behringer VPS60-220A - Industrial Panel Saw Machine The BEHRINGER VPS60-220A is a fully automatic industrial panel saw / vertical band saw. It is designed to saw large metal plates, slabs and blocks crosswise – especially steel, aluminum and other metals. - Chip conveyors - Safety device consisting of barrier grille & light barriers - Stairs - Instruction manual and technical documentation - Year of construction 2015 Technical data - Cutting area (W x H): 2250 x 600 mm - Minimally flat (W x H): 500 x 20 mm - Maximum round: 500 mm - Minimum remnant length in automatic Operation: from 40 mm - Minimum residual piece length in man. Operation: from 30 mm - Saw blade dimensions: 11080 x 54 x 1.6 mm - Cutting speed: 17 – 120 m/min - Material support height: approx. 1650 mm - Amount of cooling lubricant approx.: 250 l - Motor power – saw drive: 7.5 kW - Engine po ...

Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...

Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...

Technical Data (MEP Circular Saw / Cross-Cut Saw - Type C100 / C-Series) Machine type: Manual or semi-automatic metal circular saw / cross-cut saw for precise cuts (steel, non-ferrous metals or profiles depending on the equipment). Saw blade diameter: Typically designed for carbide or HSS saw blades in the range of approx. 250 to 315 mm (for clean, burr-free cuts). Swivel range / mitre: Flexibly adjustable saw head or rotary table for angle cuts (usually 45° left to 45° right or infinitely adjustable). Cutting range (guideline values for this class): Round material at 90°: approx. 85 to 100 mm Square / profiles: approx. 80 x 80 mm to 100 x 70 mm Drive / Power: Robust 400V three-phase motor (often switched in two stages for different cutting speeds depending on material hardness).

Gebr. Band saw Mössner SSF 420, built in 1973 Technical data (Mössner SSF 420) • Impeller/roller diameter: 420 mm • Max. cutting width / projection: approx. 410 mm • Max. cutting height / passage height: approx. 230 mm to 265 mm (depending on year of construction/version) • Work table size: approx. 600 x 600 mm (or 605 x 605 mm) • Table adjustment: can be tilted to the right and left (usually up to 15°–30°) • Cutting speed: Infinitely variable or via gear stages (approx. 12 to 2,000 m/min, ideal for steel, non-ferrous metals and plastics) • Saw blade length: approx. 3,150 mm to 3,260 mm (bandwidth usually from 3 to 16 mm) • Drive power: approx. 2.2 kW (for older models sometimes from 1.7 kW) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 600 kg to 800 kg (solid cast iron construction) • Dimensions (L x W  ...

1 Gebr. Hacksaw Kasto, HBS 1, built in 2002 Technical data (KASTO hbs 1) • Saw type: Hydraulic metal hacksaw (semi-automatic) • Cutting range at 90°: ◦ Round: max. 210 mm ◦ Flat (width x height): 240 x 190 mm ◦ Square: 210 x 210 mm • Cutting range at +45° mitre: ◦ Round: max. 150 mm ◦ Flat: 150 x 100 mm ◦ Square: 145 x 145 mm • Saw blade dimensions: 400 x 30 x 1.5 mm • Cutting speeds: 2 steps (16 and 32 m/min) • Motor power: approx. 0.8 kW • Material support height: 500 mm • Machine weight: approx. 170 kg • Dimensions (L x W x H): approx. 1,190 x 480 x 810 mm (lowered) or up to approx. 1,230 mm in maximum position

Technical data: - Cutting range at 90° around 310 mm - - flat 520 x 310 mm - flat at 45° left 350 x 310 mm - flat at 30° left 230 x 310 mm - flat at 45° right 260 x 310 mm - Mitre adjustment left + right - Smallest material dimensions round / flat 10 / 10 x 8 mm - Smallest section length 40 mm - Digital mitre degree number display - Saw blade dimensions 5000 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Bundle tensioning device - Micro spray coolant device - Total drive power 400 V / 6.0 kW - Space requirement approx. W 3000 x H 1600 x D 1750 mm - Weight approx. 1900 kg - 9 pieces of feed + removal trestles height-adjustable

Hacksaw Raim

2 x Hacksaws Behringer KS 200HY SuperA275PU4

Cross-cut saw Scheef

Band Saw Bauer HS260A

including: infeed and outfeed roller conveyors: dimensions: 1x L4640 mm, 1x 5370mm, 4x L2160 mm, roller length: 495mm. including 1 roller conveyor segment in hall 1 and parts Auction-ID: A1-49889-20

cutting diameter: 420 mmsaw band length: 4570 x 41 x1,3 mmtable height: 800 mmcutting width: 400 mmcapacity 90 degrees: round: 420 mmcapacity 90 degrees: flat: 300 x 200 mmcapacity 90 degrees: square: 300 x 200 mmcutting speed: 15 - 90 m/mintotal power requirement: 7,0 kWweight of the machine ca.: 2200 kgdimensions of the machine ca.: - mStandard Accessories for the HFA Series- Chip conveyor- Feed pressure regulator- Cut length adjustment- Multiple feed- Piece counter- Powered chip brush- Hydraulic belt tensioning- Stepless belt speed control- Jog button- Cutting and guide plates- Automatic zero stop- Cutting accuracy monitoring- NC cut length programming- Error reporting systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 6300 x 41 x 1,3 mmcutting width: mmtable height: mmsize of profile - max.: mmcutting speed: 10 - 130 m/minsaw band length: 4870 x 27 x 0,9 mmtotal power requirement: 9,0 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 3,5 x 2,35 x 2,1 mFully automatic band saw- Control Minipos 807- with chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 x 400 mmsaw band length: mmtable height: mmcutting speed: 20 - 80 m/minControl: konventionell total power requirement: 2,0 kWweight of the machine ca.: kgDimensions (LxWxH): 2,0 x 1,4 x 1,2 mHorizontal band saw, semi-automaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 125 mmcapacity 90 degrees: flat: 170 x 125 mmcapacity 45 degrees: round: 122 mmcapacity 45 degrees: square: 120 mmturning speeds: 3000 U/minengine output: 2,2 kWweight of the machine ca.: 95 Kgdimensions: 0,8 x 0,6 x 1,5 mAluminum circular saw- Pneumatic workpiece clamping system- Micro-spray systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.