Vertical Processing Centers used for sale (250)

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

x-travel: 1020 mmy-travel: 540 mmz-travel: 540 mmtable-size: 1120x540 mmspindle taper:: BT40 spindle turning speed range: -8000 U/mintool change unit: 24x weight of the machine ca.: 5.2 tSIEMENS 810D ShopmillWith NC dividing headHEIDENHAIN TS27 Measuring systemHEIDENHAIN MP12 Measuring probeMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtable-size: 1080x580 mmspindle taper: SK40 spindle turning speed range: 10000 U/mintool change unit: 30 weight of the machine ca.: 10 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

CONTROLS  CNC controls ROEDERS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   .. among of them simultaneous CNC axes: 3   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 300 mmSPINDLE / HEAD  spindle revolutions (max): 42000 /min  tool fixture: HSK A40 TOOL MAGAZINE  number of positions: 40 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3500 mm  space requirements -front/back-: 3000 mm  total height: 2750 mm  total weight approx.: 9500 kgATTACHMENTS  zero-point workholding system: yes   central lubrication system: yes   closed cabin: yes   European CE standards: yes Equipment:- Renishauw OMP400- Megatool base clamping plate- Control update 2022Special features:- Hydrostatic X, Y & Z axes- Coordinate grinding package- Kraft&Bauer CO2 ...

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmCNC-control: iTNC530 HEIDENHAINtable-size: 1000 x 560 mmmax. table load: 800 kgspindle taper: SK 40 spindle turning speed range: 20 - 14.000 U/minfeed stepless: 1 - 20.000 mm/minrapid traverse: 20 m/mindrive capacity - spindle motor: 13 / 9 kWtool change unit: 32 Poscoolant: IKZ 25 barvoltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2,25 x 3,20 x 2,30 mchip conveyor: 3,50 x 0,85 x 1,55 mcoolant equipment: 1,40 x 1,60 x 1,80 mspindle oil cooler: 0,40 x 0,50 x 1,00 m- Serial-No.: 15415041384- Machine ON: 72,882 h- Program Run: 25.267 h- control: HEIDENHAIN iTNC 530- Linear scales in all 3 axis- electr. handwheel- Tool changer 30 pos. with double gripper- Chip conveyor- TSC with belt filter system- Coolant unit- new ball screw incl. bearings (X-Axis)The data for this ad was created wi ...

Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System

x-travel: 2134 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 2134 x 914 mmmax. table load: 1814 kgspindle taper: SK 50 spindle turning speed range: 7500 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ voltage: 400 Vtotal power requirement: kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: 4,70 x 2,95 x 2,99 mchip conveyor: - Serial No.:1099476- Year of manufacture 11/2012- Through spindle coolant TSC- 5-Axis pivotable rotary table HAAS TR310 (as new condition)PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar

x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmCNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mmmax. table load: 700 kgspindle taper ISO: BT-40 spindle turning speed range: 10.000 U/minfeed stepless: 24.000 mm/minrapid traverse: 36/36/30 m/mindrive capacity - spindle motor: 15/11 kWtool change unit: 24 coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,35 x 2,20 x 2,67 mchip conveyor: 2,40 x 1,50 x 1,40 mfilter unit: 0,90 x 1,40 x 1,30 mTransformer: 0,60 x 0,55 x 0,55 m- Serial No..:M281361B5N D- Machine ON: 21,011 h- NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command)- control: FANUC Oi-MD- Internal coolant supply through spindle 20 bar- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading

control: FIDIA PCN 775 : . x-travel: 1000 mmy-travel: 620 mmz-travel: 700 mmAxis: 5 Achsen simultan gesteuertweight: 12 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 510 mmz-travel: 610 mmtable surface area: 1.020 x 510 mmcontrol: WINMAX spindle turning speed range: 12.000 U/minspindle drive: 13,5 kW: 24 St.tool adaptor: SK 40 | |internal coolant system feed: 20 bar feed: m/minrapid traverse: 35/35/30 m/mintotal power requirement: kWweight of the machine ca.: 5,0 tdimensions of the machine ca.: mused vertical machinig centre with 4th axis - 4th axis- Dual toolchanger- internal coolant with filter- spindle oil cooling- electric hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 mm, 600 mm, 600 mm

Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 750 mm  Y-axis travel: 500 mm  Z-axis travel: 600 mmTABLE  table surface (left-right): 1000 mmSPINDLE / HEAD  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6000 mm  space requirements -front/back-: 4500 mm  total height: 2800 mm  total weight approx.: 8000 kgPendulum machining unit2 x 750 mmMachine in very good and well-maintained conditionOnly used for machining aluminum or plasticFeatures:- Various tool holders- 3R clamping system on each side (see photo)- Work area light

Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe

CONTROLS  CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 600 mm  Y-axis travel: 560 mm  Z-axis travel: 510 mmTABLE  table surface (left-right): 900 mm  table surface (front-back): 560 mm  workpiece load (max): 600 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 12000 /min  tool fixture: ISO SK 40   drive power S6 40%: 13 kW  drive power S1 100%: 9 kW  spindle torque S6 40%: 82 Nm  spindle torque S1 100%: 54 NmAXIS DRIVES  traverse velocity X (max): 20000 mm/min  traverse velocity Y (max): 20000 mm/min  traverse velocity Z (max): 20000 mm/min  rapid traverse X: 30000 mm/min  rapid traverse Y: 30000 mm/min  rapid traverse Z: 30000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour position ...

Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA

Vertical machining centre HYUNDAI SPT-V550D - corse 570x410x580 mm, CNC SIEMENS 810D - rotopallet, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 650x410 mm (2), Longitudinal travel x axis: 570 mm, Cross travel y axis: 410 mm, Vertical travel z axis: 580 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 24, Spindle speed: 0- 10.000 rpm, Spindle motor power: 18,5 Kw, Cnc: SIEMENS 810D, Approx net weight: 6.000 Kg, accessories: coolant thrugh spindle

Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools

x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8880 Type: MCV 500 QUICK Producer: MAS Created: 2003 Parameters: Control System: FANUC Series 2ti-MB Work table length: 800 mm Work table width: 500 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2550 mm Machine length: 2085 mm Machine width: 1900 mm Machine weight: 3800 kg

Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 860 mmy-travel: 560 mmz-travel: 600 mmtable-size: 1000x560 mmspindle turning speed range: 10000 U/mintool magazin:: 24 weight of the machine ca.: 6.5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul

CONTROLS  CNC continuous-path control 3D MILLPLUS IT V600 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 400 mmTABLE  table surface (left-right): 700 mm  table surface (front-back): 500 mm  workpiece load (max): 500 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40   drive power: 13 kWAXIS DRIVES  traverse velocity X (max): 24000 mm/min  traverse velocity Y (max): 24000 mm/min  traverse velocity Z (max): 24000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour positions: 130 mm  tool length max.: 300 mm  tool weight max.: 6 kg  tool changing time: 8 sATTACHMENTS  European CE standards: yes No cooling system; the machine is connected to a central c ...

Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg

Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe

Inv. Num. : 8848 Type: VX 15 Producer: HURON Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Work table length: 1700 mm Work table width: 810 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1510 mm Y-axis travel: 810 mm Travel Z axis: 810 mm Cone: ISO 40 Number of all tools: 24 pieces Machine height: 4000 mm Machine length: 5400 mm Machine width: 3310 mm Machine weight: 14500 kg Equipment: Conveyor Central air cooling Washing gun Probe Blum Rulers

x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain TNC 620 table surface area: 1150 x 560 mmtool taper: SK 40 spindle turning speed range: 10000 U/minfeed range: mm/minrapid traverse: 24 m/minspindle drive: kWtotal power requirement: 25 kVAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 4,3 x 2,4 x 2,9 mWorking hours (date 10. February 2026):- Control on: 20811 h- Machine on: 13353 h- Programm cycle: 7412 h- Spindle hours : 5184 hEquipment:CNC control Heidenhain TNC 620Electronic handwheel HeidenhainTool measuring systemLinear scales in all axes X/Y/ZPreparation for measuring probe30-station tool changerCoolant equipment with paper band filter systemInternal coolant supply through the spindle 20 barBlown air through the spindleChip conveyorMachine documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8809 Type: V-30i Producer: Leadwell Created: 2012 Parameters: Control System: FANUC Series Oi-MD Switch-on hours: 32488 h Hours: 9273 h Work table length: 890 mm Work table width: 500 mm Maximum table load (even): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 410 mm Travel travel Z-axis: 610 mm Machine weight: 4500 kg

CONTROLS  CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 4   X-axis travel: 550 mm  Y-axis travel: 320 mm  Z-axis travel: 360 mmTABLE  table surface (left-right): 820 mm  workpiece load (max): 500 kgSPINDLE / HEAD  spindle revolutions (max): 24000 /min  tool fixture: HSK A50 AXIS DRIVES  rapid traverse: 75000 mm/minTOOL MAGAZINE  number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT  workpiece manipulator: articulated robot   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 7700 kgATTACHMENTS  guideway covers: yes   central lubrication system: yes   chip conveyor: yes   coolant unit: yes   closed cabin: yes   European CE standards: yes - Shuttle table machine- Knoll (KSS)  ...

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

CONTROLS  CNC controls HAAS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 3048 mm  Y-axis travel: 1016 mm  Z-axis travel: 762 mmTABLE  table surface (left-right): 3048 mm  table surface (front-back): 711 mmSPINDLE / HEAD  drive power: 15 kW  tool fixture: ISO SK 40 TOOL MAGAZINE  magazin type: disc magazine   number of positions: 24 ELECTRICAL SPECIFICATIONS  total power consumption: 15 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 6528 mm  space requirements -front/back-: 3531 mm  total height: 3105 mm  total weight approx.: 15368 kgATTACHMENTS  autom. tool clamping: yes   chip conveyor: yes   coolant unit: yes   closed cabin: yes   European CE standards: yes Under powerA lot of toolsDelivery to enduser 2008

Inv. Num. : 8573 Type: VC 1810 Producer: TRIMILL Created: 2015 Parameters: Control system: Heidenhain iTNC 530 HSCI Work table length: 2000 mm Work table width: 1370 mm Maximum table load (uniform): 10000 kg Spindle drive power: 25 kW Maximum vertical spindle speed: 14000 1/min X-axis travel: 1800 mm Y-axis travel: 1000 mm Travel Z axis: 700 mm Maximum feed speed axis X: 30000 mm/min Maximum feed speed axis Y: 30000 mm/min Maximum feed speed axis Z: 30000 mm/min Cone: HSK – A80 Number of all tools: 10 pieces Maximum tool diameter: 110/125 mm Max. tool weight: 12 kg Machine weight: 18000 kg Equipment: Tools Thermal clamps

x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain iTNC 530 spindle turning speed range: 10.000 U/mintool taper: ISO 40 table-size: 1150 x 560 mmtable load: 0,7 ttool magazin:: 30 pcs. : total power requirement: 25 KvAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 5,0 x 3,5 x 2,,9m mincluding current geometry protocolIncludes infrared measuring probeIncludes electric handwheelIncludes chip conveyorIncludes coolant systemIncludes internal coolant supply (20 bar)Includes indicator lightIncludes documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8553 Type: VOC 1000 Producer: INTOS Created: 2003 Parameters: Control system: Siemens 810D Work table length: 1100 mm Work table width: 500 mm Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine weight: 4500 kg

travel -x axis: 1.050 mmtravel -y axis: 570 mmtravel -z axis: 510 mmcontrol: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/mintool taper: BT 40 table dimension (L x W): 1300 x 570 mmnumbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor.The machine only has 13.600 spindle hours.The machine is in a well-maintained condition and has exclusively workedon Aluminum and Plastics.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM5700 | DNM-5700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg

Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle

Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg

WORKING RANGE -CUBIC-  X-axis travel: 1270 mm  Y-axis travel: 660 mm  Z-axis travel: 635 mmSPINDLE / HEAD  spindle revolutions (max): 7500 /minBASIC FUNCTIONS  number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS  chip conveyor: yes WORKING RANGE TURNING  swing diameter (max): 635 mm  worpiece length max.: 1372 mm  workpiece weight max.: 1814 kgMAIN SPINDLE  spindle revolutions (min): 0.001 /min  spindle revolutions (max): 7500 /minX/Z SLIDE  Z-axis travel: 635 mm  X-axis travel: 1270 mm  Y-axis travel: 660 mmTOOL MAGAZINE  tool diameter max.: 178 mm  tool length max.: 406 mm  tool weight max.: 13.6 kg

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg

x-travel: 1140 mmy-travel: 710 mmz-travel: 610 mmCNC-control: Heidenhain TNC640 table-size: 1300 x 700 mmmax. table load: 1000 kgspindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/minfeed stepless: max. 10.000 mm/minrapid traverse: 24/24/24 m/mindrive capacity - spindle motor: 7,5 / 11 kWtool change unit: 30 Pos.coolant: IKZ 40 bar chip conveyor: kWvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,25 x 3,08 x 3,00 m- Serial No.: 4P11152J1- TSC 40 bar incl. 600 liter coolant tank with paper band filter unit- Y-Axis with 4 liear guide rails!- X- and Z-Axis with 6 roller supports for each axis!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 10.000 Kg, Accessories: Chip conveyor

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

x-travel: 700 mmy-travel: 420 mmz-travel: 610 mmtable-size: 1260 x 490 mmspindle taper: HSK E50 spindle turning speed range: 36000 U/mintool change unit: 42 weight of the machine ca.: 5 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.