used Bending Presses for sale

SPECIAL MODEL: The butt flap is equipped with 2 additional stop fingers as standard / • Stress-relieved welded steel construction •Upper beam with torsion shaft •NC control with touchscreen HMI • Back gauge with X and R axes •European Style Upper Tool

pressure: 185 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 500 mm: 300 mmdayligth: 500 mmwork height max.: 950 mmworking feed: 0-10 mm/secreturn speed: 140 mm/secengine output: 18,5 kWcontrol: DELEM DA-66T weight of the machine ca.: 15000 kgdimensions of the machine ca.: 4000x2600x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

throat: 200 mm, Max. pressing force: 70 to, bending length: 3,000 mm, stroke: 120 mm, rare limit stop: 500 mm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,300 mm

Description: 100 tonnes of power Total bending length 3,050 mm Space between uprights 2550 mm Gooseneck depth 250 mm Programmable stroke 175 mm Approximate tank capacity 80 litres ELGO programmer Manual gauge 500 mm long AMADA/PROMECAM split tool line Serial number: 10933weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,180 x 2,940 mm

pressure: 135 tchamfer lenght: 4050 mmdistance between columns: 3150 mmthroat: 200 mmdayligth: 310 mmpiston stroke: 130 mmajustment speed: 100 mm/secworking feed: 8.0 mm/secreturn speed: 65.0 mm/sectable width: 180 mmtable height: 900 mmControl: ELGO P8822 pressure: 220 bartotal power requirement: 8.5 kWweight: 8700 kgrange L-W-H: 4500 x 1700 x 2640 mm from a maintenance workshop maintained condition ()Furnishing:- simple NC electro-hydraulic press brake- with ELGO digital control unit - model P8822 Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swivel control panel, front right- electro-motorized back gauge (X axis) with digital ELGO position display 2x manually adjustable stop fingers (R+Z axis)- WILA manual table cambering, with analogue actual value display- split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html- 1x rotating univers ...

Description: Capacity x Max. folding length 80 Ton x 2000 mm Control: Cadman 8-axis Graphic Distance between uprights:1600 mm Maximum stroke: 200 mm Distance between apron and scissor: 400 mm Gooseneck depth: 400 mm Table width:120 mm Closing speed:130 mm/s Working speed:10 mm/s Return speed:113 mm/s Motor power:7.5 kW Weight:6200 kgthroat: 400 mm, bending length: 2,000 mm, table surface area l x w : 2000x120 mm, total power requirement: 7.5 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,000 x 2,700 mm

pressure: 320 tchamfer lenght: 4000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mBrand: LVDType: PPEB 320/40CNC brand: MorrisCNC model: Solutions ESA 630Year of make: 1990HydraulicCapacity: 320 TBend length: 4.000 mmMulti V + J-kniveSteered backstop X+RIncl. 1 Set of toolsMachine weight: 25.000 kgMachine is flat on the groundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: clamping top/bottom tools: manualthroat: 300 mm, Max. pressing force: 50 to, Tool clamping type : manueel, bending length: 2,000 mm, control: Mazak Pal B-1, rare limit stop: 1,000 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,350 x 2,650 mm

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

pressure: 50 tchamfer lenght: 3075 mmdistance between columns: 2600 mmControl: Sintesi throat: 250 mmupper clamping stroke: 140 mmdayligth: 295 mmpre-running speed: 90 mm/secpress speed: 1-7 mm/secreturn speed: 62 mm/sectotal power requirement: 4 kWweight of the machine ca.: 4,4 tdimensions of the machine ca.: 3,7 x 2,2 x 2,2 mCondition: ready for operation: Video(s) available on our website.: CE signed: Electric 380 Volt: Foot switch: 2-hand-control panel: Upper tool divided: 3000 mmUpper tool: spitz/gekröpft Matrize: 1 V / geteilt, 3000 mmMatrize 4 V: 3000 mmProtective railing behind, right + left side: Mot. back gauge: 600 mmcrowning system: Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. T ...

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 210 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 490 mmthroat: 350 mmstroke: 215 mmworking feed: 9,8 mm/secreturn speed: 80 mm/secajustment speed: 130 mm/secwork height max.: 845 mmControl: DELEM DA 69 total power requirement: 15 kWweight of the machine ca.: 15 kgdimensions of the machine ca.: 3880 x 1675 x 3880 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmdayligth: 475 mmthroat: 255 mmstroke: 165 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/secControl: DELEM DA 65 total power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1550 x 2470 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: Delem DA-66T throat: 255 mmram stroke: 215 mmdayligth: 530 mmrapid traverse - down: 150 mm/secpress speed: 1 - 9,8 mm/secreturn speed: 80 mm/secpower capacity: 7,5 kWtank contens: 228 lsound - pressure - turn off level ca. max.: >70 dBconnected load: 12 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,9 x 1,6 x 2,8 mCE signed: Electric 400 Volt: Foot switch: Light barrier in front: Matrize: Upper tool: crowning system: Mot. back gauge: 580 mmHydraulic press brake with updated CNC control Delem DA-66T,controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning, cranked upper tool and matrix single V.X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm.R-axis stop vertical 200 mm, 150 mm/sec, accuracy  ...

Machine Type: Press Brake Manufacturer: Promecam Type: 50x2 Condition: used / functional Offer will only be sent if a complete imprint is provided! Price 5.650 Euro incl. 19% VAT ex stock Warstein Location Warstein , Germany Reference M-PRO-0923 DESCRIPTION We offer you a used press brake from the manufacturer Promecam. Specifications Bending force 50t Bending length 2m Weight approx. 3.2t No tools required Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Description: Nominal force: 750 kN Beam width: 3050mm Table width: 60mm Work surface height: 900mm Inlet: 350mm Actuator travel: 100mm Goose neck: 400mm Distance between end plates: 2600mm Max. pressure: 280 Bar Oil content: 60Lthroat: 400 mm, Max. pressing force: 75 to, bending length: 3,050 mm, stroke: 100 mm, table surface area l x w : 3050x60 mm, weight approx.: 4,800 kg, Approx. Onsite Dimension. (l x w x h): 3,640 x 1,550 x 2,200 mm

- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools

Description: Manual Press Break Working lenght: 1000 mm Internal reference: CBT-112X weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 500 x 1,000 mm

pressure: 63 tchamfer lenght: 3200 mmdistance between columns: 2500 mmControl: E21 stroke - max.: 320 mmstroke: 120 mmthroat: 250 mmback stop - adjustable: 500 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,0 tdimensions of the machine ca.: LBH 3,20 x 1,30 x 2,21 mincluding upper toolincluding dieBending capacity steel: 2.5 mm to 3,200 mmMachine may not comply with current UVV guidelinesWe expressly point out that we assume no responsibility for thisMachine is sold as isThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms

pressure: 1200 kNchamfer lenght: 3110 mmdistance between columns: 2690 mmdayligth: 347 mmtiltable up to: +/- 3 Gradthroat: 420 mmtable width: 100 mmwork height max.: 1000 mmrapid traverse y-axis: 200 mm/minspeed: working cycle y-axis: 10 mm/sreturn travel y-axis: 180 mm/sx-axis: 500 mm/sr-axis: 200 mm/sz-axis: 1000 mm/s0: y-axis: +/- 0,01 mmx-axis: +/- 0,05 mmr-axis: +/- 0,01 mmmovement: y-axis: 200 mmx-axis: 600 mmr-axis: 340 mmControl: total power requirement: 18,5 kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: 3,60 x 1,75 x 2,33 mcontrol: 2D-colour-graphic control DELEM T 3000inclusive toolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tchamfer lenght: 1275 mmdistance between columns: 1040 mmstroke: 215 mmthroat: 420 mmwork height max.: 1085 mmweight of the machine ca.: 4900 kgdimensions of the machine ca.: 2200x1800x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 4250 mmcolumn daylight: 3680 mmthroat: 420 mmstroke of ram: 445 mmcontrol: TASC 6000 weight of the machine ca.: 19500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tstroke: 365 mmdistance between columns: 2690 mmchamfer lenght: 3060 mmsafety distance: 104 mmvoltage: 3 x 400 Vrated current: 47 Afrequency: 50 HzPower connection: 18,8 kVAcontrol voltage: 24 kWRequired air-pressure: 6 bar: 65 msoperating pressure: 340 barweight of the machine ca.: 12950 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

pressure: 230 tchamfer lenght: 3060 mmdistance between columns: 2690 mmStroke: 365 mmdistance between columns: 2690 mmdimensions: 3660 x 2310 x 3100 mmmachine weight ab.: 17.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4080 mmdistance between columns: 3680 mmthroat: 410 mmajustment speed: 150 mm/secreturn speed: 135 mm/secbending speed: 10 mm/secheight of stroke: 365 mmdayligth: 535 mmtotal power requirement: kWweight of the machine ca.: ca. 24 tdimensions of the machine ca.: 4,65 x 2,31 x 3,10 m• 2D graphics control Delem DA• pneumatic matrices displacement• 2 movable support arms• Hydraulic tool clamping at the top and bottom• CNC controlled crowning• controlled axes: Y1, Y2, X, R1, R2, Z1, Z2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23435 Specifications: - Max. working length 1270 mm - Column passage 1040 mm - Max. pressing force 500 kN - Distance table / ram 410 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed rapid traverse 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 10 mm/sec - Total drive power 8 kVA - Pneumatic connection 6 bar - Space requirement approx. W 2000 x H 2400 x D 2100 mm - Weight approx. 4800 kg - with: - CNC control DELEM , DA 65 - Y1 + 2 ; X ; R ; Z - Footswitch - Controlled back gauge with height adjustment 5 - 500 mm - 2 support arms - hydr. Tool clamping - Matrix table displacement pneumatically supported

pressure: 85 tchamfer lenght: 2550 mmdistance between columns: 2050 mmstroke: 365 mmcontrol: DELEM weight of the machine ca.: 10000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TTMC ABKANTPRESSE TYP 1300 x 30 Sound -Capaciteit 1300 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

pressure: 250 tchamfer lenght: mmthroat: mmstroke of ram: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending length: 1250 mm Pressing force: 800 kN ram stroke 160 mm Hydraulic pressure: 255 bar Stop time: 110 ms Safety distance: 176 mm Input device (screen): Cybelec DNC 74 PS b Documentation available Max. pressing force: 82 to, bending length: 1,250 mm, stroke: 160 mm, weight approx.: 7,300 kg, Approx. Onsite Dimension. (l x w x h): 1,820 x 1,950 x 2,900 mm

pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 300 mmweight: 14000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 524 mmweight of the machine ca.: 17.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training