boring mills and machining centers used for sale (3,250)

Technical data: travels X/Y/Z: 700mm/400mm/330mm, clamping surface X/Y: 850mm/410mm, table load max.: 300kg, T-slots: 3 pieces 14mm, speed range: 10000rpm, tool holder: BT30, tool positions: 21, rapid traverse speed X/Y/Z: 54m/min, feed speed: 1-30000mm/min, acceleration: up to 1.5G, installation dimensions X/Y/Z: approx. 2115mm/2040mm/2400mm, machine weight: approx. 2200kg, inspection possible by arrangement.

Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.

Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-s ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94900 €: 1793.61 €: 4100 mm: 13 mm: 8 mm: 350 mm: 8 1/min: 1.75 °: 18 : 62 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 3 Stk.: 818 mm: 550 mm: 4520 mm: 5350 mm: 2250 mm: 3650 mm: 2250 mm: 16300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

Manufacturer: Cincinnati Model: Lamb CFV 1050i Year of Manufacture: 2008 Axis Travel - X-axis: 1,050 mm - Y-axis: 540 mm - Z-axis: 720 mm Control System - Control: Heidenhain iTNC 530 Tool Changer - Automatic tool changer: 30-position Electrical Data - Power supply (3-phase): 208 / 220 / 230 / 240 / 380 / 415 / 460 / 480V - Frequency: 50/60 Hz - Power supply (1-phase): 230V - Frequency: 50/60 Hz - Control voltage: 24V - Capacity: 60 kVA - Current (3-phase): 10 A - Current (1-phase): 17 A Find more here - / Contact us at -

Drilling Ø in St 60/GG 20: 28/32 mm Spindle holder: MK 3 Projection: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Largest distance between table and drilling quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Dimensions: 800 x 420/600 x 1790 mm

The machine is in good technical condition, testing is possible by prior arrangement.

x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain iTNC 530 spindle turning speed range: 10.000 U/mintool taper: ISO 40 table-size: 1150 x 560 mmtable load: 0,7 ttool magazin:: 30 pcs. : total power requirement: 25 KvAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 5,0 x 3,5 x 2,,9m mincluding current geometry protocolIncludes infrared measuring probeIncludes electric handwheelIncludes chip conveyorIncludes coolant systemIncludes internal coolant supply (20 bar)Includes indicator lightIncludes documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 7800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control system[ Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

Scharmann - WB 80 / Heidenhain Digital Display -Travel X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 to. -Spindle holder MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant device -Various accessories / tool holders etc.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg

Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment.

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor

3 pcs double spindle machining centers SW BA422 built 2015/2014/2014 - 4-axis version Workspace x-axis 400 mm y-axis (tool change position) 500 (775) mm z-axis 425 mm Spindle spacing 400 mm Double swivel beam (Q-axis) 0 – 180° with NC rotary axes and counter bearings ----- Number of spindles 2 Spindle speeds up to 17,500 1/min Power 40/ 100% ED 2x 35/26 KW / 80 Nm ----- Feed/rapid traverse x/ y/ z 55/ 70/ 70 m/min Tool magazine 2 x 60 tool positions Tool holder HSK 63 Max. tool diameter 80 / 160 mm Max. tool length 300 mm Max. tool weight 10 kg Installation area L x W x H approx. 7.0 x 4.0 x 4.38 m Machine weight approx. 18,000 kg Transport weight approx.  ...

Key data: 80 mm, 1500 mm

Stock number: 4025 Full boron capasitet 10-80 mm Drilling depth 1500 mm Max. workpiece 500 mm Total power 67 kW Accessories: Tool Holder Pcs Length: 6500 mm, Height: 2000 mm, Width: 2100 mm, Weight: 8500 kg

Pensulum holder for ER25 collets

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

: neu : ca. 4 Monate ab Auftragse : 1530 mm: 12 mm: 9 mm: 8 1/min: 3 °: 8 : 500 mm: 15 kW: 180 l: 950 mm: 2200 mm: 1200 mm: 1800 mm: 3400 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 640 mm  Y-axis travel: 600 mm  Z-axis travel: 500 mmTABLE  table surface (left-right): 850 mm  table surface (front-back): 600 mm  workpiece load (max): 600 kgSPINDLE / HEAD  spindle revolutions (max): 8000 /min  tool fixture: ISO SK 40   drive power: 20 kWAXIS DRIVES  traverse velocity X (max): 4000 mm/min  traverse velocity Y (max): 4000 mm/min  traverse velocity Z (max): 4000 mm/min  rapid traverse X: 7000 mm/min  rapid traverse Y: 4000 mm/min  rapid traverse Z: 4000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 100 mm  - with free nei ...

x-travel: 1.250 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: MillPlus B - axis: -30 - +180 °tool taper: HSK 100 spindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 38,00 KWmax. torque at 40% / 100% load: 288 / 187 Nmfeed X/Y/Z/-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z: 60,00 m/mintable surface area: Ø 1.100 mmtable load: 1,50 ttoolpiece magazine: chain magazine: 120 Stücktool diameter: 110 mmtool diameter with 2 vacant positions: 230 mmtool length - max.: 500 mmweight of tools max.: 30,00 kgrotary table speeds infinitely variable: 10 - 500 U/mintotal power requirement: 85,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 9,50 x 8,50 x H3,50m m5-axis turning/milling machining center withMillPlus IT FD control, dual pallet changer,coolant system, coolant through the spindle,chip conveyor, rotatin ...

x-travel: 1.850 mmy-travel: 1.400 mmz-travel: 720/905 mmControl: SIEMENS SL 840 D spindle turning speed range: 15.000 U/minB - axis: -20 / +120 °Tool bore: HSK-A63 0tool magacine with: 45 Plätzentool length - max.: 365 mmworkpiece diameter at used places besides: 90 mmtool diameter with 2 vacant positions: 130 mmNC rotary table: 1.600 mmT-slots: 12 groove width: 18H12 flute distance: 100 mmtable load capacity: 3.000 KGTable speed max.: 30 1/mintotal power requirement: 89 kWweight of the machine ca.: 26 tdimensions of the machine ca.: 7,00 x 6,20 x 4,15 m5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor.Machine can be inspected under powerThe data for this ad was cr ...

bore capacity in steel St 60: 25 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2x14x224 mmdistance spindle - column min./max.: 132/724 mmfeed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min.engine: 1,0/1,6 kWvoltage: 400 VStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max.6 threads/min (thread cutting capacity depending on spindle speed), thread d ...

x-travel: 600 mmy-travel: 500 mmz-travel: 450 mmControl: Heidenhain TNC 426 PB tool change unit: 22-fach tool taper: SK40 turning speeds: 5-6.300 U/mintable-size: 900 x 530 mmtable load: 400 kgtotal power requirement: 9 kWweight of the machine ca.: 3550 kgdimensions of the machine ca.: 2,2 x 2,7 x 2,05 m3-axis vertical machining centre MIKRON UM 600, built in 1997In excellent technical condition, all guides have been freshly scraped.The spindle has been re-mounted and has since been used for only 262 hours.New power unit for spindle drive installed.Accessories:Heidenhain TS 642 touch probe system2 new vicesSK40 tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mmx-travel: 2200 mmy-travel: 1700 mmz-travel: 1400 mmspindle travel: 900 mmspindle taper ISO: 50 turning speeds: 6-1000 U/mintable surface area: 1120x1800 mmtotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Feed rates m/min: 80/50/50 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø500x380 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe blowing air through spindle center selectable via M-function Laser tool measurement for measuring t ...