boring mills and machining centers used for sale (3,261)

spindle diameter: 130 mmx-travel: 6500 mmy-travel: 2000 mmz-travel: 900 mmW-axis (spindle longitudinal): 800 mmspindle motor: kWspindle turning speed range: 5 - 1000 U/mintotal power requirement: 30 kWweight of the machine ca.: 35,5 tdimensions of the machine ca.: - m- Spindle mount: SK 50- Table size: 1800 x 2000 mm,10t- Angle head- Faceplate with faceplate slide U: 320 mm,- Heidenhain digital Readout,- Counterholder- 2 plate fieldsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Installed power: 0.58 kW Voltage: 380 V Spindle speed: max. 3000 rpm

TyP / Model: BS 40 AIII Djc Hbvm Toiypmxj Sski Drilling capacity steel / cast iron: 50 / 60 mm Spindle mount: MK 5 Speeds: 32 to 1,400 rpm Feed: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total connection: 6.7 kW Accessories/equipment: thread cutting function, right-left barrel; autom. Feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm Availability: immediately Location: Thuringia Arnstadt Loading: by buyer Stacker: is available Total weight: 1500 kg Operating voltage: 360 V Control voltage: 220 V Connected load: 5.73 kW

x-travel: 508 mmy-travel: 508 mmz-travel: 508 mmtotal power requirement: kWweight of the machine ca.: 3650 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 630 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 7700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mmx travel: 3000 mmy travel: 2000 mm- Z-axis travel: 1600 mmtravel -w axis: 700 mmTABLE: table-size: 2000 x 1800 mmtable load: 10 tB-axis (table): 0,001 °MILLING SPINDLE / HEAD: - spindle revolutions (max): 5 - 2000 U/min- spindle diameter: 135 mm- tool fixture: ISO SK 50: BT 50 TOOL MAGAZINE: - number of positions: 40 feed: 1 - 4000 mm/minrapid traverse: 8 m/mincontrol: Fanuc 16i-MB total power requirement: 42 kVAweight of the machine ca.: 37,2 tdimensions of the machine ca.: 6,3 x 6,9 x 4,79 mequipped with:- CNC Control Fanuc 16i-MB- NC-Rotary Table 1800x2000mm- ATC 40-fold (BT 50)- COOLANT THROUGH THE MAIN AXIS- Chip Conveyor- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls HAAS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 3048 mm  Y-axis travel: 1016 mm  Z-axis travel: 762 mmTABLE  table surface (left-right): 3048 mm  table surface (front-back): 711 mmSPINDLE / HEAD  drive power: 15 kW  tool fixture: ISO SK 40 TOOL MAGAZINE  magazin type: disc magazine   number of positions: 24 ELECTRICAL SPECIFICATIONS  total power consumption: 15 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 6528 mm  space requirements -front/back-: 3531 mm  total height: 3105 mm  total weight approx.: 15368 kgATTACHMENTS  autom. tool clamping: yes   chip conveyor: yes   coolant unit: yes   closed cabin: yes   European CE standards: yes Under powerA lot of toolsDelivery to enduser 2008

x-travel: 1250 mmy-travel: 1000 mmz-travel: 1000 mmspindle taper: HSK-A 100 turning speed range: 10.000 U/minspindle drive: 28 kWTorque: 1240 Nmfeed range: 0 - 12.000 mm/minrapid traverse: 60 m/mintable surface area: 800 x 1000 mmworkpiece weight: 1500 kgControl: Siemens 840D total power requirement: 80 kWweight of the machine ca.: 21 tdimensions of the machine ca.: 5,9 x 6,5 x 3,5 m5-axis simultaneous machine equipped with:- CNC control Siemens 840D- 6-fold pallet station- Tool changer (HSK 100)- Coolant system with IKZ 40/80bar- Probe- tool breakage controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle bore: 63 mmspindle diameter: . mmx-travel: 800 mmy-travel: 700 mmz-travel: 1300 mmw-axis: 600 mmb-axis: . °spindle turning speed range: 18-1800(32x) U/mintable surface area: 800x890 mmspindle taper ISO: 40 P.D.B. total power requirement: 11,4 kWweight of the machine ca.: . tdimensions of the machine ca.: . mFacing HeadTailstockThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Tea ...

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: 1500 mmbore capacity in cast iron: 60 mmthreading: . diameter of quill: . mmspindle taper MT: 5 turning speeds: 28-2.500 U/minFeed: mm/Usurface area: mmtotal power requirement: kWweight of the machine ca.: tMax. drilling capacity taper: Diameter: 50 mmMax. spindle-to-table distance: 1500 mmMin. spindle-to-table distance: 320 mmTravel spindle: 310 mmKW: 4Volts: 400Machine number: 869Included:Clamping cube 1000x750x500 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production line ...

x-travel: 9000 mmy-travel: 3200 mmz-travel: 1900 mmw-axis: 1000 mmV-axis: 3000 mmcontrol: Siemens 840 D SL Table: Drehverschiebetisch 2 Stücktable load: max. 20 tturning speeds: U/mincoolant: Tool changer: 120 pos.tool taper: SK 50 size of pallet: 2200x1500 mmspindle power: 46 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWorkpiece interferece circle diameter: 2500 mmOrthotic head power: 46 kWAggregate (pick-up max. 6 positions): Quill diameter 130 mmOrthotic head 1x1 degreeThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machine ...

A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible.

A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible.

A bench drilling and tapping machine Ixion including automatic rapid traverse is available. Drilling capacity steel/cast iron: 15mm/14mm, tapping capacity: M3-M10, spindle mount: MK2, quill stroke: 90mm, reach: 215mm, column diameter: 75mm, speed: 1600rpm, table dimensions X/Y: approx. 220mm/285mm, weight: approx. 100kg. An on-site inspection is possible.

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.

arm length: 1450 mmtaper MK: 4 Cube: ja weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 345 mmbore stroke: 200 mmtable surface area: 720 x 560 mm0: 60 - 765 U/minfeed: 0,15 - 0,2 - 0,3 - 0,36 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,4 tDrill with:Feed2 gearsLeft/right rotationFoot switchCoolant pumpMachine lightnew quick-release chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmarm length: 1600 mmbore capacity in cast iron: 60 mmspindle diameter: 85 mmquill stroke: mmtool taper: MK 5 speeds: 24 - 1050 U/minfeeds: 0,06 - 1,0 mm/Ucolumn diameter: 345 mmvertical adjustment of the arm: 900 mmthread cutting attachment: ja Boring motor: 5,5 kwtotal power requirement: 7,5 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: 2,5 x 1,0 x 2,99 mRadial drilling machine- Mounting cube 750 x 500 x 500 mm- Digital display for boom travel- Coolant system- Good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 4000 mmtable load: 80 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 11500 mmy-travel: 4500 mmw-axis: 1600 mmz-axis: 2000 mmspindle diameter: 200 mmRotary table: E25OB23941 2.000x 2.000 mmbed length turntable: 4600 mmtool taper: SK50 : 80 tPlate field size: 10.000 x 15.000 mmtool taper: SK 50 total power requirement: 83 kWweight of the machine ca.: tincl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power:  ...

Lealde Valvecenter-5V CNC turning and drilling center Year 1997 designed specifically for valve bodies (oil & gas valves, pipeline valves, etc.). It performs turning, drilling, and machining of valve components in one setup.  Used mainly in valve manufacturing plants and heavy machining shops. Maximum swing over longitudinal guides: 1000 mm Maximum swing over cross guides: 700 mm Main spindle nose: DIN 55021 – Form B Spindle through-hole diameter: 139 mm Front spindle bearing diameter: 200 mm Maximum spindle speed: 1000 rpm Maximum spindle torque: 3434 Nm Axis Rapid Traverse • W axis: 20,000 mm/min • X / X1 / X2 axes: 17,400 mm/min • Z axis: 15,000 mm/min Travels Turning slide – transverse travel: 1250 mm Drilling slide – longitudinal travel: 1350 mm Drilling slide – transverse travel: 135 + 135 mm Motors Main spindle motor power:  ...

Key data: 3850 mm, 350 mm, 280 mm

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB ports Speed infinitely variable up to 22,000 rpm Boc Hqjyqyaqoa R H Towi Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 light barrier areas and 2 material stops, thus pendulum operation possible A total of 8 material tensioners Spindle in good condition, spindle pull-in force: 12 kN Weight: approx. 2,000 kg

Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine ru ...

Year of construction: 2006 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Ri ...

Key data: 900 mm, 850 mm, 700 mm

5 Axis Machining Center Manufacturer: Hedelius Type Acura 85 Control Heidenhain iTNC640 Year of construction 2022 Clamping area 850 x 750 Max. table load 1000kg Travel X/Y/Z 900/850/700 max speed 18,000rpm Tool holder HSK63 80 Compartment Tool Changer IKZ 70bar Chip conveyor Electronic handwheel Hydraulic zero point clamping system pssend also a magnetic plate 600 x 800mm adapted to the NP clamping system. Hydraulic Vise Schunk 2 x Schunk center clamps 60 HSK 63 Recordings Machine comes from a company liquidation and is in perfect TOP condition. All information without guarantee

CHIRON FZ 08K S Magnum HSP High-Speed CNC Machining Center TECHNICAL FEATURES: Year: 2007 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Installed power: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW probe type TS27R x1 Spindle Cooling Unit x1 watering tray x1 unit for 6th side machining x1SCHUNK gripping system x84 HSK40 Type Tool Holder x14 Collet Type F35 x1 Electrical Cabinet Air C ...

1 gebr. DMG DMU 50 M machining centre, built in 2001 X-axis travel: approx. 500 mm Y-axis travel: approx. 400 mm Z-axis travel: approx. 400 mm Table diameter approx. 630 mm T-slots 6 pieces B-axis can be swivelled manually (-5° to +95°) C-axis manually rotatable 360° Max. workpiece weight approx. 200 kg Tool holder SK40 (DIN 69871) Speed range up to approx. 8,000 rpm Spindle power approx. 7.5 – 10 kW Torque approx. 40 – 60 Nm Control: HH 124 Weight approx. 3.8 t.