boring mills and machining centers used for sale (3,261)

x-travel: 2000 mmy-travel: 1500 mmz-axis: 3000 mmW-axis (spindle longitudinal): mmspindle diameter: 100 mmtable surface area: 1.400 x 1.300 mmtable load: tspindle turning speed range: U/minpower capacity - milling spindle: kWtool taper: MK |dimensions: 6,4 x 3,2 x 3,4 mweight of the machine ca.: 11,0 tused table borer.- some tool holders- turntable with motor- coolant system- facing plate Ø 660The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 900 mmz-axis: 800 mmW-axis (spindle longitudinal): 500 mmspindle diameter: 90 mmtable surface area: 1.000 x 1.000 mmtable load: 2,5 tspindle turning speed range: 8- 1600 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 |control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 mweight of the machine ca.: 8 tused table borer. retrofitted to CNC Heidenhain TNC 407- some tool holders- turntable with motor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindle speeds: 10.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: 5 spindle diameter: 60 mmfeed: ja m/minweight of the machine ca.: 1,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Matec 40 HV Control: Heidenhain iTNC 530 Year of Make: 2008 Internal machine no. 70 Travels: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm Horizontal Z-axis: 990 mm vertical NC swivel head infinitely variable: +/- 105 degrees Tool magazine: 40-fold Tool holder: SK50 Motor spindle: 8,000 rpm / 68kW Accessories: - Chip conveyors - Partition wall prepared - Electronic handwheel - Internal coolant supply 20 bar (paper belt filter 450 l) - Full work area cladding with roof - Rinsing gun - Oil-central lubrication - Oil mist extraction system - 3D probe with radio (Renishaw RMP60)

drilling machine, year 1990. Used machine in good condition. More info & price on IndustrialBuyer.

A horizontal CNC 5-axis universal machining center from DMG Mori is available. Travel X/Y/Z: 650mm/950mm/700mm, max. rotary table load: 600kg, spindle speed: 15000rpm, tool interface: HSK-A63, power: 21kW/16kW, torque: 111Nm/85Nm, tool positions: 123, coolant tank capacity: 1300l, tool clamping force: 25kN, interference circle diameter: 630mm, max. workpiece height: 700mm, feed rate: 60m/min, rapid traverse: 60m/min, position measuring system resolution: 10nm, accuracy: 0.006mm, operating hours: 6490h. Including Renishaw infrared touch probe and Blum tool measurement. Documentation available. An on-site inspection is possible.

Boring power: 35.0 / 40.0 mmbore capacity in cast iron: 50.0 mmthreading: M 30 bore stroke: 150 mmSize of table plate: 730 x 210 mmCenter of spindle to wall or column: 280 mmSpeed: 80.0 - 1.400 U/mindistance spindle /table: 85 - 755 mmspindle taper MT: 4 MKcolumn diameter: 120 mmfeed: 0.1 / 0.2 / 0.3 mm/Uvoltage: 400 VMotor output: 1.3 / 2.3 KWweight of the machine ca.: 350 kgrange L-W-H: 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features:- Heavy-duty, versatile column drill press- Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots- Automatic spindle feed - Fixed drilling depth stop- Stepless speed adjustment- Pole-changing motor- Thread-cutting device- Quick-release drill chuck with tapered shank - User manual (PDF)The data for this ad was crea ...

spindle diameter: 130 mmx-travel: 9000 mmy-travel: 3000 mmz-travel: 1000 mmw-axis: 700 mmspindle turning speed range: 10 - 2800 U/minrapid traverse: 10000 mm/minfeeds: 1 - 8000 mm/mininner taper of milling spindel: ISO 50 ram: diameter: 360 x 400 mmspindle: 46 / 37 kWTool changer: 40 Tools rotary table:: 30 tsurface area: 2000 x 2500 mmtotal power requirement: 132 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 15500 x 9000 x 5391 mmCNC Floor Type Boring Machine equipped with:- CNC-Control Siemens 840D sl- CNC-Rotary Table 2000x2500mm, 30t - ATC for 40 tools- Cooling through Spindle (20 bar) - 2 pcs Floor Plates 4000 x 2000mm- HUI 50 Boring Head- Facing Head- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9330 Type: MCV 1270 R Producer: MAS Generated: Parameters: Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine height: 3330 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11800 t Equipment: Grips Vise

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  X-axis travel: 750 mm  Y-axis travel: 500 mm  Z-axis travel: 600 mmTABLE  table surface (left-right): 1000 mmSPINDLE / HEAD  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6000 mm  space requirements -front/back-: 4500 mm  total height: 2800 mm  total weight approx.: 8000 kgPendulum machining unit2 x 750 mmMachine in very good and well-maintained conditionOnly used for machining aluminum or plasticFeatures:- Various tool holders- 3R clamping system on each side (see photo)- Work area light

x-travel: 1050 mmy-travel: 800 mmz-travel: 560 mmControl: HEIDENHAIN iTNC 530 Tools changer: 30 pos.table-size: 950 mmturning speeds: 28000 U/minoutput: 55/43,5 kwtaper: HSK A 63 a-axis: -10º/+110º °c-axis: 360 °Internal cooling system: 10 - 80 bartable load: 800 kgtotal power requirement: 80 kVATotal weight, approx.: 13 tdimensions of the machine ca.: 3,6 x 3,8 x 3,18 m5-axis machining centre DMG-MORI HSC 105 linear- CNC control Heidenhain TNC 530- Tool changer 30-fold (HSK A63)- NC rotary table2606h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 520 mmz-travel: 475 mmControl: 840D sl Operate (CELOS) SiemensMain spindle:: turning speed range - main spindle: 20 - 14.000 min/-1power capacity - main spindel: 20,3 / 14,5 kWmax. Torque: 121 / 84 Nmtool taper: SK 40 DIN69871work table:: table surface area: 1.160 x 570 mmmax. table load: 1.000 kgwork height max.: 800 mmtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 DIN69871max. tool diameter: 80 / (130) mmmax. tool length: 300 mmchange-time chip to chip: 5,9 secfeeds:: rapid traverse ( X / Y / Z ): 42 m/minfeed speeds: max. 36.000 mm/minfeed power: 6,5 kNAccelaration: 5 m/s²total power requirement: 18 kVAweight of the machine ca.: 6,7 tdimensions of the machine ca.: 5,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Coolantsystem: 245 l through spindle coolant: 20 bar direct travel-measuring-system: Spray gun: elektr. hand wheel: Tool Maga ...

bore capacity in steel (diameter): 50 mmthroat: 400 mmbore stroke: 250 mmtaper MK: 4 MKtable-size: 705 x 580 mmfeeds: 0,1 - 0,2 - 0,3 - 0,4 mm/Uturning speeds: 60 - 1205 U/mintotal power requirement: 4,0 KWweight of the machine ca.: 0,85 tdimensions: 1,2 x 0,8 x 2,55 mColumn drilling machine with:- Power feed- Left/right rotation- Coolant pump- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Toyoda CNC horizontal machining center is available. X/Y/Z travel: 750mm/800mm/850mm, table dimensions X/Y: 550mm/550mm, spindle speed: 15000rpm, tool interface: SK40, tool magazine capacity: 60, weight: approx. 16000kg, power-on hours: 133870h, operating hours: 25394h, feed hours: 12802h. Including chip conveyor, 4th and 5th axis, and Knoll KF 400/2250. Documentation available. An on-site inspection is possible.

A DMG Mori CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 20000rpm, rapid traverse: 60m/min, feed rate: 60m/min, feed force: 10kN, tool interface: HSK-A63, number of pallets: 2, max. workpiece weight: 500kg, tool positions: 40, control: Siemens Sinumerik 840D sl Operate, power-on hours: 14948h, operating hours: 5251h. Including chip conveyor, pallet changer and coolant tank. Documentation available. An on-site inspection is possible.

A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible.

A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible.

A DMG MORI CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 15000rpm, torque: 250Nm/104Nm, tool interface: HSK-A63, spindle-to-table distance: 80mm-810mm, spindle nose-to-table distance: 70mm-950mm, pallets: 2, pallet dimensions X/Y: 500mm/500mm, max. workpiece weight: 700kg, max. workpiece diameter: 800mm, max. workpiece height: 1000mm, tool positions: 60, rapid traverse: 60m/min, feed rate: 60m/min. Machine dimensions X/Y/Z: approx. 6000mm/4000mm/2700mm, weight: approx. 12000kg, control: Siemens Sinumerik 840D sl, power-on hours: 33184h, operating hours: 10601h. Including 70bar internal coolant supply and Knoll KF 110/700. Documentation available. An on-site inspection is possible.

Key data: 760 mm, 510 mm, 570 mm

Inv. Num. : 9328 Type: ACE VC 500 Producer: DAEWOO Created: 2005 Parameters: Control System: FANUC Series 21i-MB Work table length: 860 mm Work table width: 560 mm Maximum table load (even): 300 kg Spindle drive power: 15 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 510 mm Travel Z axis: 570 mm

Key data: 735 mm, 650 mm, 630 mm

Inv. Num. : 9327 Type: DMC 65 V Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN TNC 426/430 M Table diameter: 630 mm Maximum table load (uniform): 600 kg X-axis travel: 735 mm Y-axis travel: 650 mm Z-axis travel: 630 mm

vertical machining center, year 2004, CNC TNC 530. Used machine in good condition. More info & price on IndustrialBuyer.

vertical machining center, year 2015, CNC 0i-MD. Used machine in good condition. More info & price on IndustrialBuyer.

A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: Adapter sleeves, reducing sleeve MK6/MK5 -Type: MK6-MK5 -Dimensions/Quantity: see photos -Transport dimensions: 620/250/H63 mm -Weight: 29.8 kg

The machine is in good technical condition; it can be tested by prior arrangement.

x-travel: 1350 mmy-travel: 560 mmz-travel: 510 mmControl: Heidenhain iTNC 530 total power requirement: 13 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure.

Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor