boring mills and machining centers used for sale (3,260)

Key data: 630 mm, 400 mm, 500 mm

Chiron FZ 18 W, NC machine: 5-axis machine Interference circle diameter [mm]: 630 with variaber Wz alternating plane Plate size: Workpiece changing device 0 / 180° weight-dependent, Self-regulating thanks to self-learning speed control Transport load per side Ø - max. 400Kg with stainless steel centre partition Clamping area 2 x 940 x 470mm² with threaded and fitting hole grid: M16x Ø 15H7x50mm Workpiece change time: approx. 3.7sec. weight-dependent, Self-regulating thanks to self-learning speed control Workbench: Two-axis NC rotary table Type ATU 200/AWU 160, Fabr. PEISELER Face plates Ø 180mm with centering hole A50 + Ø 012 Fixing pin Ø 16H7 and 4x M10 in bolt circle 104.8 Center height 174mm with horizontal axis of rotation Dimension to upper edge of face plate with vertical axis of rotation 263mm Sub-range 5, axis 360° continuous, 4th axis 0-90° S ...

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08K S Magnum Work table: length 770mm, width 290mm (clamping surface) Rigid table with chip tray for optimum chip fall during wet and dry machining. With raster drilling pattern: M16 x diameter 15 H7 x 50mm Rapid traverse: 75m/min in X, Y and Z axis Max. speed [rpm]: 3000 Dimensions/Weight: Length [m]: 2.308, Width [m]: 1.405, Height [m]: 2.447 Total weight [Kg]: 3400 Electronics: Control type: Siemens CNC control 840D (PCU 50 / NCU 572.3, 6 measuring circuits, 1 channel) incl. 10.4" TFT color screen/full keyboard OP010S Control Panel Logic Windows NT/XP Machine connection: Voltage [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frequency [Hz]: 50/60Hz Type of current: three-phase current Power: 14kVA

spindle diameter: 200 mmx-travel: 16200 mmy-travel: 5250 mmz-axis: 1600 mmw-axis: 1990 mmspindle turning speed range: 0,9 - 930 U/minfeeds: 6000 mm/minrapid traverse: 6000 mm/mindimension of the ram: 520 x 520 mmmain drive motor: 77 kWControl: Heidenhain TNC 530 tool taper: ISO 60 total power requirement: 180 kVAweight of the machine ca.: - tdimensions of the machine ca.: 20 x 12 x 8 m2008 modernised with new electrics, motors and controlsequipped with:- Control Heidenhain TNC 530- Rotary Table SEA60 3500 x 4000mm, 60t- coolant system- chip conveyor- angular milling head- without floor platesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1520 mmy-travel: 700 mmz-travel: 800 mmcontrol: Siemens 828 D Shop Milltable surface area: 1600 x 700 mmrapid traverse: 30 m/mintable load: 1,4 tturning speed range: 8000 U/minmax. torque on the spindle: 300 Nmpower capacity - milling spindle: 19,5 kWno. of tools in the magazine: 30 Stücktool taper: SK 40 | |weight of the machine ca.: 10,0 tdimensions: 4,4 x 2,3 x 2,9 mEquipment: - Coolant through the spindel - Rigid tapping - Dialog programming Shop Mill - Chip conveyor - external elect. hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Key data: 2 mm, 425 mm, 400 mm

Machining Center (Vertical) CNC TYPE: SW BA25 Control: Siemens 840 C Travel X/Y/Z: 2 x 600 or 1 x 1,800 / 425 / 400mm Main spindle: SK40 / 7,500 rpm /106 Nm / 14kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 KG Equipment: Single or two-station with shuttle operation Left side with controlled 4th axle and hydraulic double clamp Right side 2x hydraulic double clamp Separate hydraulic unit for increased clamping pressures under manual clamping Can be reclamped to program-controlled voltage via central hydraulics Conveyor Coolant device with gap filter and high-pressure pump for internal coolant supply Prepared for Renishaw touch probes

bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtaper MK: 5 MKtable-size: 660 mmfeeds: 0,1-0,14-0,2-0,28-0,4 . mm/Uturning speeds: 40 - 800 U/mintotal power requirement: 4,0 KWweight of the machine ca.: 1,4 tdimensions: 1,2 x 0,8 x 2,59 mPillar drill with:- Feed- Left/right rotation- Variable spindle speed- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 325 mmbore stroke: 170 mmtaper MK: 3 MKtable-size: 560 x 480 mmfeeds: 0,1 - 0,16 - 0,25 mm/Uturning speeds: 60 - 1400 U/mintotal power requirement: 1,8 KWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 2,1 mPillar drill with:- Feed- Variable spindle speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

The machine is in good technical condition, after prior agreement it is possible to test it. X 750mm, Y 500mm, Z 600mm. Spindle speed 10 thousand, tool magazine 22 positions, chip conveyor, cutting fluid filtration, iTNC 530 control system.. double machining center (3 axes and 5 workplace axes) AXA DBZ with rotary table SRTA2-300

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fo ...

Key data: 762 mm, 406 mm, 506 mm

CNC Vertical Machining Center CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x X-axis travel 762 mm Y-axis travel 406 mm Travel Z-axis 508 mm Spindle holder DIN 68971A Spindle speed 12,000 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

x-travel: 2900 mmy-travel: 1000 mmz-travel: 700 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

Offer 25248 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting

Inv. Num. : 8620 Type: DBZ Producer: AXA Created: 2012 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 28279 h Number of stacking positions: 22 pieces Number of axles: 5 pieces Maximum spindle speed: 10000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Equipment: Rotary work table

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(55)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(60)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(46)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(47)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(61)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(52)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!