boring mills and machining centers used for sale (3,296)

Inv. Num. : 8551 Type: M 1200 Producer: Microcut Created: 2018 Parameters: Control system: Siemens Sinumeric 828D SW4 Work table length: 1400 mm Work table width: 710 mm Maximum table load (even): 1000 kg X-axis travel: 1200 mm Y-axis travel: 730 mm Travel travel Z-axis: 650 mm Number of axles: 30 pieces Machine weight: 10500 kg

Inv. Num. : 8550 Type: VF-3 Producer: HAAS Created: 2017 Parameters: Control system: HAAS Work table length: 1219 mm Work table width: 457 mm Maximum table load (uniform): 1588 kg Spindle drive power: 22.4 kW Speed: 8100 1/min X-axis travel: 1016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Cone: BT 40 Machine weight: 5316 kg

Travel X/Y/Z: 1000mm/600mm/600mm, feed rate: 30m/min, rapid traverse: 30m/min, table dimensions X/Y: approx. 1200mm/600mm, max. table load: 800kg, tool stations: 24, tool holder: SK40, speed: 8000rpm. Machine dimensions X/Y/Z: approx. 3000mm/3500mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10346h, spindle hours: approx. 10346h. Includes a compact filtration system Interlit SUK 200/550, year of manufacture: 2000. The machine is equipped with a new control system. Documentation available. An on-site inspection is possible.

Inv. Num. : 8548 Type: XV 1000 Producer: Hardinge Bridgeport Created: 2007 Parameters: Control system: Siemens 810DE Work table length: 1100 mm Work table width: 500 mm Tool magazine: 20 pieces Maximum spindle speed: 8000 1/min Number of axes: 3 X-axis travel: 1020 mm Y-axis travel: 610 mm Travel Z-axis: 560 mm Machine weight: 6000 kg

5-Axis Vertical Machining Center DMG DMC 75V LINEAR Linear Motors The machine can be viewed in working order in our warehouse in Gussago, Brescia. Mimu Machine Tools Gussago BS Italy Dmg DMC 75 Linear Heidenhain CNC iTNC 530 Tool holder HSK 63 Spindle power 35 kW Spindle speed 18,000 rpm Number of tools 60 X-axis travel 885 mm Y-axis travel 600 mm Z-axis travel 600 mm Rapid feeds X-Y-Z linear axes 90 m/min Roller guides Fourth-axis head yes Fourth-axis head type continuous Fourth-axis head degrees -10° + 110° Rotary table yes Rotary table type continuous Table size 750 mm MACHINE EQUIPMENT Precision package with optical scales on the axes New spindle line The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single setup on Multiple surfaces of the same workpiece. It is generally equipped with multiple m ...

bore capacity in steel (diameter): 60 mmCenter of spindle to wall or column: min./max. 320 - 160 mmspindle turning speed range: 20 - 2.500 U/minquill stroke: 310 mmtotal power requirement: 4 kWweight of the machine ca.: 4.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier

Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

x-travel: 1800 mmy-travel: 700 mmz-travel: 700 mmcontrol: Heidenhain iTNC 530 table surface area: 2100 x 700 mmtable load: 1500 kgturning speeds: 20 - 18000 U/mintaper ISO: SK 40 spindle motor: 35 / 25 kWrapid traverse: 40 m/mintool change unit: 60 -fachdimensions of the machine ca.: 5,5 x 3,5 x 2,7 mtotal power requirement: kWweight of the machine ca.: 14 t- Control Heidenhain iTNC 530- 5-axis- Fixed table with integrated rotary table dia. 750mm (500kg)- IKZ 40 bar- Tool changer 60-fold (SK 40)- Milling head with B-axis- Chip conveyor- Spray gun- 3d Quick Set- BLUM laser measuring system- Direct distance measuring system- 2 Rotary Clean Windows-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 580 mmz-travel: 580 mmcontrol: SEICOS 16M B-axis (table): 360 x 1° mmfeed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/minturning speed range - stepless: 35 - 12.000 Nmspindle drive: 22,00 kWmax. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stücksize of pallet: 2x 400x400 mmmax. workpiece diameter: 630 mmworkpiece height max.: 680 mmworkpiece weight max.: 400 kgtotal power requirement: 30,00 kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 4,00 x 3,50 x H3,00 mWith SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho DMC63V BJ 2009 ( incl. new milling spindle + Y-spindle ) Heidenhain Control

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request

Type: Lid Maho DMU35M Year of Make: 2003 Description: Spindle 20-6300rpm 10kW SK40 Feed speed X,Y,Z 5000mm/min Position tolerance (direct measuring system) 0.010mm Travel: X=350mm, Y=240mm, Z=340mm Other: Tool clamping pneumatic Rotary table with swivel axis manual Weight 1600kg Operating hours approx. 4000h Control Siemens NC810D Unfortunately, the tool spindle has a bearing damage and is therefore only able to run to a limited extent.

BAZ Wagner Eumach EBM 3200 BJ2009

4-axis CNC horizontal milling machine Hüller Hille BlueStar5 built in 2007 automatic pallet changer with 2 interchangeable pallets with 4 vices each (125), 4 additional interchangeable pallets (one with mineral casting clamping tower), Renishaw measuring system, high-pressure coolant system with additional filter device, coolant and air through the spindle, 40-fold tool magazine BT40, Operating hours and control see photo

BAZ Heckert H55 (4 axle) BJ 2019

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 2,3 kW: 350 kg: 800 x 1000 x 2000 mmAccesories:-Machine light (built-in)-Coolant device in the foot (built-in)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

max. workpiece diameter: . mmmin. workpiece diameter: . mmworkpiece length: . mmclamping diameter max.: 550 mmVertikal stroke: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 6000 mmy-travel: 2500 mmz-travel: 800 mmw- away: 600 mmrapid traverse: 10 m/minspindle speed:: 1600 UPM chip conveyor: vorne control: Seit 1998 Heidenhain Plate area: 6000x4000 mmpower capacity: 45 kWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

Inv. Num. : 8525 Type: LG 1000 Producer: Hartford Created: 2017 Parameters: Control system: FANUC AI 100 Hours: 9285 h Number of axes: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Travel Z axis: 500 mm

Travel X/Y/Z: 500mm/400mm/500mm, table dimensions X/Y/Z: 750mm/500mm, max. table load: 900kg, tool holder: CAT40, spindle speed: 7500rpm, spindle power: 11kW, tool positions: 21, feed: 5m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: 2100mm/2300mm/2650mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 160 mmno. of turning speeds: stufenlos Stufenspindle turning speed range: 65 - 460 / 460 - 3250 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MK 4 table surface area: 500 x 420 mmbase plate: 650 x 450 mmDistance spindle/table max.: 500 mmcolumn diameter: 120 mmdistance spindle/base plate: 1100 mmTotal height: 2200 mmvoltage: 400 V / 50 Hzdrive motor: 1,5 kWcoolant pump drive: 0,2 kWtotal power requirement: 1,7 kWweight of the machine ca.: 0,550 tdimensions of the machine ca.: 0,6 x 0,8 x 2,2 mIndustrial, gear-driven drilling machine,with coolant device,adjustable drilling depth,left-hand and right-hand rotation of the spindle,motor with 2 speeds,work light,table can be rotated and tilted,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8113 Type: M 1050 Producer: Microcut Created: 2021 Parameters: Control system: Heidenhain TNC 620 Switch-on hours: 4727 h Operating hours: 2942 h Work table length: 1200 mm Work table width: 600 mm Number of stacking positions: 30 Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of T-slots in the table: 6 pieces

x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmcontrol: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/minpower capacity at 40 % load: 28,00 kWpower capacity at 100 % load: 19,00 kWmax. torque on the spindle: 121 / 82 Nmspindle taper: HSK-A63 B-axis: -10 - +180 °c-axis: 360 x 0,001 °feed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z: 60,00 m/minfeed B-axis: 1 - 10.800 °/minrapid traverse B-axis: 30,00 U/minsize of pallet: 800 x 630 mmmax. workpiece diameter: 800 mmworkpiece height max.: 1.330 mmtable load: 1,20 ttoolpiece magazine: chain magazine: 180 Stücktool diameter: 80 mmtool diameter with 2 vacant positions: 160 mmtool length - max.: 450 mmweight of tools max.: 15,00 kgtotal power requirement: 57,00 kWweight of the machine ca.: 22,00 tdimensions of the machine ca.: 8,50 x 5,50 x H3,80 m5-axis-machining center with SIEMENS Sinumerik 840D powerline control,  ...

Inv. Num. : 8506 Type: VCE 1600 PRO Producer: MIKRON Created: 2012, GO 2023 Parameters: Control system: Heidenhein iTNC530 Switch-on hours: 67342 h Hours: 32684 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1600 mm Y-axis travel: 900 mm Z-axis travel: 800 mm GO 2023: New Linears Screws on the X and Y axes and new ruler on the Y axis