boring mills and machining centers used for sale (3,260)

x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Switch-on hours 51800 h Program running hours 15100 h Specifications: Speed, max.: 12,000 rpm Power: 77 kVA Weight, approx.: 18,100 kg

Key data: 435 mm, 465 mm, 560 mm

Matsuura MX-330 - PC10 Vertical 5-axis machining center CNC control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 Max. workpiece diameter x height 330 x 300 mm X-axis travel 435 mm Y-axis travel 465 mm Travel Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15,000 rpm Spindle holder MAS BBT 40 Spindle motor 7.5/5.5 kW Magazine capacity 90 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

x-travel: 1400 mmy-travel: 1050 mmz-travel: 1200 mmControl: Fanuc 31i spindle turning speed - stepless: 6000 U/minspindle taper: ISO 50 spindle motor: 35 / 22 kWpallet table size: 800 x 800 mmworkpiece weight: 2000 kgdistance spindle center to table: 75 - 1125 mmRapid Travel X / Y / Z-Achse: 24 m/mindimension of workpiece: 1450 x 1550 mmtotal power requirement: 71 kVAweight of the machine ca.: 27 tdimensions of the machine ca.: 7,3 x 4,3 x 3,75 mHorizontal 4-axis CNC machining centre- Fanuc 31i CNC control- 60-position tool changer (ISO 50)- Rotary table (1° division) with 2 pallets- High-pressure cooling 70 bar with cyclone filter system- Chip conveyor- Tool loading management- Renishaw RMP 60- TS 27R tool probeSpindle running hours 6000h, running hours: 8050hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.

A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible.

x-travel: 700 mmy-travel: 420 mmz-travel: 610 mmtable-size: 1260 x 490 mmspindle taper: HSK E50 spindle turning speed range: 36000 U/mintool change unit: 42 weight of the machine ca.: 5 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale

bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg

x-travel: 3000 mmy-travel: 2000 mmz-travel: 1600 mmspindle diameter: 150 mmspindle taper ISO: 50 spindle stroke: 700 mmspindle turning speed - stepless: 5 - 2500 U/minrapid traverse: 10000 mm/mintable surface area: 1600 x 2000 mmworkpiece weight: ca. 20 tspindle drive motor: 50 kWfeeds x/y/z -stepless: 1 - 9999 mm/mintable positioning: 360.000 °total power requirement: ca. 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,0 x 8,0 x 4,5 mHorizontal drilling and milling machine / machining centre in cross-table designwith:2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR410 for all axes with V24 interface, punched tape reader, new electrics,new hydraulics, new servo motors, measuring probe for workpiece measurement- 60-position chain tool changer model WM III k02- B-axis (table rotary adjustment) 360,000 °- IKZ - internal spindle cooling, 20  ...

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible.

Union boring mill CBFK 150/2 from 1990 for sale. Is currently still in use,. Technical details / accessories / addition: x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm Spindle diameter 150 mm Spindle holder ISO 50 Spindle stroke 700 mm Spindle speeds - infinitely variable 5 - 2500 rpm Rapid traverses 10000 mm/min Table clamping area 1600 x 2000 mm Workpiece weight approx. 20 t Spindle drive motor 50 kW Feeds x/y/z - infinitely variable 1 - 9999 mm/min Table positioning 360,000 ° Total power requirement approx. 70 kW Machine weight approx. 40 t Dimensions approx. 6.0 x 8.0 x 4.5 m In 2005: new 5-axis CNC control Dr. Heidenhain TNC 430 - electron. Handwheel HR 410 for all axles with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, 60-speed chain tool change magazine model WM III k02 B-axis (round table adjustment) 360,000  ...

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360, tilting head +120 /-30 32 slots, chip conveyor Rpm=12k

Works well.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Key data: 28 mm, 300 mm

SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control

x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.