boring mills and machining centers used for sale (3,251)

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 €: 12 mm: 19 mm Weldon : 0.4 kW: 361 mm: 238 mm: 352 mm: 145 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThis special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operatein remote areas, where no power supply is available.The base includes very strong neodymium magnets and does not require any electricity to operate.PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicatethe current status of the drill and provide safety information.The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials.Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ahbattery pack.Features and benefits:• LED interface flashes green wheninadequate adh ...

Drill, pillar drill, column drill, column drill-Manufacturer: Alzmetall, pillar drilling machine type AB5/S-Engine: VKS 3 kW-Speed: 40 - 800 rpm, continuously variable right-left rotation-Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev.-Table size: Ø 500 mm, travel 470 mm-Spindle holder: MK5-Spindle stroke: 240 mm-Projection: 380 mm-Column Ø: 220 mm-Dimensions: 1450/680/H2160 mm-Weight: 1262 kg

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

good working condiiton

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

IXION AUERBACH TL 1004 deep hole drilling machine was built in 2004 in Germany by Ixion Auerbach Maschinenfabrik GmbH. The machine is designed for precision drilling of deep holes with a maximum depth of 1000 mm. Workpieces made of various types of material are machined fully automatically by means of precisely guided tools, which keeps the hole perfectly straight. All machining parameters are programmed in an advanced control system with many useful functions. The offer also includes an extensive equipment, consisting of, among others, a measuring probe, gun drills and a chip conveyor. The IXION TL1004 deep hole drilling machine weighs 3500 kg. Technical specifications of the IXION AUERBACH TL 1004 deep hole drilling machine - maximum drilling depth: 1000 mm - maximum hole diameter: 32 mm - minimum hole diameter: 6 mm - drilling capacity in 1.2312 steel (carbide gun drill): fi 25 ...

x-travel: 780 mmy-travel: 560 mmz-travel: 560 mmtotal power requirement: --- kWweight of the machine ca.: 12,0 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmSpindle Speed: 4.000 U/min.table surface area: 800 x 425 mmtool taper: SK 40 feed: 2.000 mm/mintotal power requirement: 5 kWmachine weight ab.: 2.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine comes with a complete set of equipment, which is also quite valuable, e.g., the heads can also be used on other machines. Auction-ID: A7-40830-4

x-travel: 2200 mmy-travel: 1600 mmz-travel: 1850 mmcontrol: Mazatrol Matrix Smooth G max. workpiece diameter: dia 2400 x 2000 mmmax. table load: 6000 kgsize of pallet: 1250 x 1250 mmB - Axis: 0,0001 °turning speeds: 10000 U/mindrive capacity - spindle motor: 37/30 kWmax. torque on the spindle: 350 Nmno. of tools in magazin: 120 tool adaptor: BT 50 Rapid Travel X / Y / Z-Achse: 43 m/mindimensions of the machine ca.: 11 x 7,1 x 4,5 mdistance spindle /table: 100 - 1700 mmtotal power requirement: 120 kVAweight of the machine ca.: 57,5 tequipped with:- CNC control Mazatrol Smooth G- B-axis (0.0001°)- ATC 80-fold (BT 50)- Chip Conveyor- 2-fold Pallet Changer- High Pressure cooling through Unit- Chip Conveyor- Renishaw Laser Tool Measur.- Thread Cutting Function-Power-On Time: , Automatic Cutting: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FUJII SEIKI Heavy Duty Lathe (Japanese Origin) Technical Specifications: • Turning length: 2,000 x 26,000 mm • Modular bed • Capacity between centers: 60 tons • Drilling attachment included • Drilling tool length capacity: 12,000 mm Condition: Available Location: South America Machine suitable for heavy-duty machining of long shafts and large industrial components.

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2022 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of spindle stylus

Inv. Num. : 8987 Type: WD 130 Producer: TOS Generated: Parameters: Maximum spindle speed: 2000 1/min X-axis travel: 6400 mm Y-axis travel: 2500 mm Z-axis travel: 430 mm Without a table.

BAZ Cover Maho DMU 60 BJ 2001

BAZ Hurco VMX 40 built in 2001

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: Heidenhain iTNC530 total power requirement: --- kWweight of the machine ca.: ca. 5,0 tdimensions of the machine ca.: 5,10 x 6,10 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 €: 325.63 €: 40 mm: MK 4 : 360 mm: 61 - 1.169 (9) U/min: 2.2 kW: M33 : 550 mm: 950 mm: 2363 mm: 610 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 200 mm: 175 mm: 35 - 835 mm: 1240 mm: 550 x 550 mm: 950 x 550 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEautomatic feedgear drivefixed machine tabledisplaceable and rotatable drill headtiltable turntablefront wheel for sensitive fine feedcoolant equipmentlightingOPTION (PRICE ON REQUEST):Manual tapping system ALTERNATIVE:ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 €: 193.73 €: 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: M24 : 665 mm: 640 mm: 2100 mm: 260 kg: Automatisch 0,10 - 0,20 - mm/U: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 665 x 400 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine3 aut. feedsleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMANIncl. following optional equipment:lighting equipmentcoolant equipment and machine base with T-slots(symbol photo)OPTION (PRICE ON REQUEST):reverse for tappingTime of delivery with options: approx. 8 weeksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: EWAG AG Model: Laser Line Ultra Machine type: 5-axis laser processing center Serial number: 7195-0022 Release: 5 Year of Make: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser classification machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating voltage: 3 × 400 VAC/N/PE Frequency: 50 Hz Control voltage: 24 V DC Rated current: 17.3 A Connected load: 12 kVA Max. fuse: 25 A (slow-blow) Electrical diagram number: 100211907 Extraction: ULT LAS 200 extraction system Documentation: fully available Operating hours: 3578802 h Note: Laser unit defective and needs to be replaced Robot is currently being expanded and is being overhauled, optionally available Viewing possible under power

Manufacturer: EWAG AG Model: Laser Line Ultra Machine type: 5-axis laser processing center Serial number: 7195-0022 Release: 5 Year of Make: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser classification machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating voltage: 3 × 400 VAC/N/PE Frequency: 50 Hz Control voltage: 24 V DC Rated current: 17.3 A Connected load: 12 kVA Max. fuse: 25 A (slow-blow) Electrical diagram number: 100211907 Extraction: ULT LAS 200 extraction system Documentation: fully available Operating hours: 3578802 h Note: Laser unit defective and needs to be replaced Robot is currently being expanded and is being overhauled, optionally available Viewing possible under power

Key data: 1067 mm, 610 mm, 610 mm

Hurco VMX 42 with WinMax control Year of construction 11/2006 Only commissioned 05/2007 Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions max. table load: 1100kg, spindle power: 18kW, Feed: 7600mm/min, Rapid traverse: 30m/min, Tool positions: 24, Tool holder: SK40, Speed: 12000rpm, Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, Weight: approx. 6800kg, Good condition and can be viewed by arrangement under power with us in 83558 Maitenbeth, Maschinenservice Thöbert. Price is net plus VAT. Freely loaded onto trucks . Sale as a used machine without warranty

spindle diameter: - mmx-travel: 1600 mmy-travel: - mmtotal power requirement: - kWweight of the machine ca.: 13,7 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- GX- Performance VMCs- Dr HeidenHain iTNC530 with HR 410 Handwheel - Coolant system- Rigid sructure and superior reliability- Central lubrication

GENERAL Project No.: 905821 Quantity: 1 pcs. Manufacturer: SW Schwäbische Werkzeugmaschinen Type: BA 422 Control: Siemens 840 D solutionline Year of Make: 2017 Condition: Used machine Approx (hrs): 18302 Spindle in approx. (hrs.): 4718 DESCRIPTION MILLING 5 axes Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. feed speed in X/Y/Z 55/70/75 m/min Max. acceleration in X/Y/Z 8/8/15 m/s2 Feed force in X/Y/Z 15000/15000/2x8000 N Direct displacement measurement system BLOCK - Milling spindle unit Tool holder HSK A-80 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 2x27 kW Max. torque at ED 10-40/100% 2x200 Nm Spindle diameter in the front bearing 80 mm 2 pcs horizontally arranged milling spindle(s) Spindle spacing 400 mm Pneumatic tool system control Chain tool magazine 2x30 stations Max. tool diameter 80 mm Max. ...

Inv. Num. : 8973 Type: MCFV 1680 Producer: ZPS Created: 2010 Parameters: Work table length: 1800 mm Work table width: 780 mm X-axis travel: 1650 mm Y-axis travel: 810 mm Travel Z axis: 810 mm

Inv. Num. : 8972 Type: WD 130 A Producer: TOS Created: 1996 Parameters: Work table length: 2200 mm Work table width: 2200 mm X-axis travel: 4700 mm Y-axis travel: 1755 mm Travel distances Z-axis: 1100 mm Machine weight: 27 t

Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change