boring mills and machining centers used for sale (3,251)

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmspindle taper: MT:5 table surface area:750 x 1380 mmsurface area:1450 x 920 mmtotal power requirement:5 kWweight of the machine ca.:3000 kgdimensions of the machine ca.:2060× 930 × 2760 mm

Boring power:10 mmweight:590 kgconnected load:2 kWdimensions::1500 x 1300 x 2300 mm

Drilling and milling machine withpowerful 2-speed motor.Recording MC 3 - B16. Drill chuck 3 - 16 mm.Left / right switch.Spindle protection. Fine tuning. Ejection wedge. Threaded Rod for Tool ClampingRelated Tools.Drilling capacity in steel 32 mmProjection 200 mmDrilling stroke 70 mmCapacity finger milling machine 16 mmSpindle holder MK3 Spindle speeds 50 - 3000 rpmTable adjustment transverse 220 mmTable adjustment longitudinal 425 mmTable clamping surface 700 x 210 mmConnection voltage Vmax. Distance between work table and spindle nose 470 mmTotal power requirement 1.5 kWMachine weight approx. 230 kgDimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5)

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:100 mmtotal power requirement:0,7 kWweight of the machine ca.:302 kgdimensions of the machine ca.: 620 x 800 x 1950 mmTable dimensions:350 x 250 mmspindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

bore capacity in steel (diameter):10 mmthroat:210 mmbore stroke:80 mmtotal power requirement:1,1 kWweight of the machine ca.:195 kgdimensions of the machine ca.:530 x 650 x 1850 mmspindle speeds::355, 710, 1400, 2800 U/minTable dimensions:340 x 280 mm

Coolant system with belt filter, chip conveyor, control Heidenhain

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

bore capacity in steel (diameter):50 mmtotal power requirement:7,8 kWweight of the machine ca.:1720 kgdimensions of the machine ca.:1200 x 770 x 2700 mmnumber of spindle speeds:45 - 1000 mmsurface area:630 x 500 mm

bore capacity in steel (diameter):45 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mmELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total we ...

throat:640 mmtotal power requirement:1,6 kWweight of the machine ca.:450 kgdimensions of the machine ca.:1000 x 600 x 2100 mtable-size:455 x 380 mmchuck::MK 3 working area:355 x 280 mm

bore capacity in steel (diameter):55 mmarm length:1600 mmtotal power requirement:4 kWweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mmweight of the machine ca.:5,5 tdimensions of the machine ca.:2800 x 980 x 3000 mm

x-travel:1000 mmy-travel:800 mmz-travel:800 mmweight of the machine ca.:24000 tdimensions of the machine ca.:ca. 7,8 x 6,1 x 3,4 m m

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 €: 3647.7 €: 6080 mm: 13 mm: 10 mm: 350 mm: 10 1/min: 0.5 - 2.5 °: 29 : 58 to: 1000 mm: 200 mm/s: 37 kW: 400 l: 6 Stk.: 950 mm: 650 mm: 6375 mm: 7400 mm: 2200 mm: 3700 mm: 2900 mm: 33820 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale6 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drilling machine with: automatic feedtapping function.Digital depth display2 stage motorSpindle protectionSwivel tableLED lightingCoolant systemDrilling capacity in steel 40 mmProjection 350 mmDrilling stroke 180 mmSpindle holder MK 4 MKTable: 560 x 560 mmColumn diameter 140 mmSpeed 50 - 1450 rpmFeeds 0.1 - 0.2 mm/revTotal power requirement 1.5 kWMachine weight approx. 580 kg Condition: never used / new (5)

: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 €: 348.48 €: 50 mm: MK 4 : 400 mm: 54 - 1032 (9) U/min: 2.9 kW: M36 : 600 mm: 1200 mm: 2500 mm: 710 kg: 0,1 / 0,2 / 0,3 / 0,4 mm/U: 230 mm: 200 mm: 50 - 850 mm: 1290 mm: 550 x 550 mm: 1060 x 600 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality gear drilling machinecooling equipmentVDE electricchuck protectionleft right drillinglightingfront handwheel for sensitive feedtable turn and tiltableuser manual in GERMANOPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBCALTERNATIVE:ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUESTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:630 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:6,5 tNumber of axles:5 St.spindle turning speed range:18.000 U/minnumbers of tools in magazin:24 tool taper:SK 40 Round TableB-Axis

Unused, handbook available

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

x-travel:800 mmy-travel:400 mmz-travel:350 mmtotal power requirement:44 kWweight of the machine ca.:8,8 tdimensions of the machine ca.:6,1 x 4,1 x 3,3 mtool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St.rotary table diameter:1340 mm

Column drill with: ARBO/CE approved protective cover.Quick-release chuck with pin. Tilting work table. Deep stop. Ejection wedge. Drilling capacity in steel 32 mmThroat depth 200 mmDrilling stroke 120 mmSpindle holder MK 4 MKTable: 290 x 270 mmColumn diameter 92 mmSpeed 150 - 2450 rpmTotal power requirement 1.1 kWMachine weight approx. 95 kgDimensions L-W-H 0.66 x 0.8 x 1.7 m Condition: never used / new (5)

Pneumatic tapping machinedesign with an adjustable angle, horizontal tapping possibleTapping machines for M3 - M12 threads, angle adjustable.6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metricSpeed infinitely variable 400 rpm.Working pressure 6 - 8 barWorking range max. 1100 mmWeight 20 kgSuitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drilling machine type SB 32 ST-FB -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

Tapping machine, drilling and tapping

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 €: 12 mm: 19 mm Weldon : 0.1 kW: 175 mm: 250 mm: 312 mm: 10 kg: 12 mm: 36 mm: 51 mm: 70 mm: 350 U/minThe PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameterby means of twist drill bits with Weldon shank 19mm (3/4’’).Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers.Features &, benefits:• Dual bars guide system ensures extraordinary stiffnessand adjustment free operation• Compact size and ultra-lightweight - ideal for site work• Rugged one piece slide and gear box for extra stability• Purpose designed motor with heavy duty gear box• Maintenance-friendly design makes it easy to use• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials• Magnetic Power Adhesion Con ...

Column drilling machine with- left/right rotation- Machine light- Coolant- Emergency stop deviceDrilling capacity in steel 50 mmProjection 365 mmDrilling stroke 230 mmSpindle diameter 60 mmSpindle holder MK 4Spindle speeds 54 - 1032 rpmNumber of speeds 9 stepsTable clamping area 620 x 520 mmTotal power requirement 3.5 kWMachine weight approx. 0.9 tDimensions approx. 1.2 x 0.8 x 2.45 mCondition: untested (6)