boring mills and machining centers used for sale (3,259)

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

With wooden work table 242x80x100cm LxWxH, to be disassembled

Column drill with: - Feed - Variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 325 mm Drilling stroke 170 mm Mounting MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 2.9 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 m

Gerfa magnet. Fein machine.

Brand: Quantum Maschinen Type: B30 GS Machine: Drill press Drive: gear driven Power: 550 / 750 W Voltage: 400V (3-phase) Speed: 100 – 1450 rpm (multiple positions)

Machine number: 00121330Speed range: 80 - 1400 rpmTable dimensions: 350 x 300 mm

Machine number: 00122457Speed: from 240 to 3800 rpmTable dimensions: 300 x 230 mmwith vise attached, jaw width: 100 mm

Auction-ID: A1-45502-171

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke182,5 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmGeneralUniversal Turning Machines; Control: Siemens 840D SL Main drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ex ...

Key data: 1000 mm, 1100 mm, 750 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1150x900mm Axis X ... 1000mm Axis Y ... 1100mm Axis Z ... 750mm Spindle speed ... 10-18000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A 63 Max. workpiece weight ... 2000kg Magazine spaces ... 60 Machine weight ... 12500kg Total power requirement... 71kVA The machine is in good condition, possible to test under power.

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Control Fanuc Spindle diameter ... 100mm Axis X ... 1270mm Axis Y ... 910mm Spindle speed ... 0-2000 rpm. Axis W ... 730mm Axis Z ... 900mm ISO 50 Max. table load ... 3000kg Clamping table surface ... 1000x1120mm Machine weight ... 11500kg L x W x H ... 5000 x 3000 x 2800mm Main engine power... 18.5kW Total power requirement ... 31kVA More info on request. The machine is ready for the viewings.

Column drilling machine ALZMETALL ALZSTAR 30/S Year of Make: 2012 Drilling capacity in steel 30 mm Threading in ST 60 M16 Clamping surface table 514 mm x 360 mm Guard Drilling depth 140 mm Spindle mount MK 3 Spindle speeds 225 rpm – 4300 rpm infinitely variable with digital display Drill Table Lighting 1 drill chuck up to 13 mm Machine vise

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

x-travel: 1200 mmy-travel: 950 mmz-travel: 1200 mmB-axis travel: 0 – 360°A-axis travel: +45° to -90°Tool holder spindle: HSK 100Torque spindle: 200 mmSpindle speed: 15,000 rpmChain-type tool magazine: 60 positionsPallet changerChip conveyorHigh-pressure coolant through the spindleCoolant filtration systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1016 mm, 610 mm, 710 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 710mm Spindle speed ... 0-10000 rpm controlled axes ... 3 IKZ ISO 40 Magazine spaces ... 24 Machine weight ... 5500kg

Key data: 650 mm, 600 mm, 500 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 630mm Axis X ... 650mm Axis Y ... 600mm Axis Z ... 500mm Spindle speed... 0-18000 rpm controlled axes ... 5 IKZ ... 80bar Spindle holder ... HSK-A63. Magazine spaces ... 32 Axis A ... +30/-115° Axis C ... 0,001° Machine weight ... 9500kg The machine is in good condition, possible to test under power.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

Spare parts (spindles) for Starrag machine ZT 800 / ZT 10002x Ø310x800mm (150mm x Ø128.5mm) 1x Ø310x1000mm (340mm x Ø128.5mm)Various ball screws to Starrag- partly new ground - partly new (unused)

CONTROLS  CNC controls MORI SEIKI MSG-501 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 4   X-axis travel: 1300 mm  Y-axis travel: 1200 mm  Z-axis travel: 1100 mmTABLE  table surface (left-right): 800 mm  table surface (front-back): 800 mm  workpiece load (max): 2000 kgSPINDLE / HEAD  spindle revolutions (max): 0 /min  spindle revolutions (max): 6000 /min  tool fixture: ISO BT 50 AXIS DRIVES  rapid traverse: 42000 mm/minTOOL MAGAZINE  number of positions: 60 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 7400 mm  space requirements -front/back-: 4300 mm  total height: 3750 mm  total weight approx.: 23500 kgATTACHMENTS  chip conveyor: yes   coolant unit: yes   band filtration unit: yes   through spindle coolant attachment: yes   closed c ...

A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible.

Mazak VTC 800 30SRYear of manuf. : 2016 Control : Siemens 840 Dsl Speed : 18000 rpmMovement X/Y/Z : 3000/800/720 mmTool holder : SK 40 ____________Description:In General:Year of manufacture:2016Control system:Siemens 840 DslTravel ranges X/Y/Z:3,000/800/720 mmTable size:3,500 x 820 mmMax. table load:2,500 kgSpindle speed:18,000 rpmTool holder:SK 40Spindle:Technology:Direct drive spindleSpeed:18,000 rpmMax. power:approx. 35 kWMax. torque:approx. 100 NmTool holder:SK 40NC swivel headTechnology:Swivel head with milling spindleB-axis:+/- 110°NC rotary table:Technology:Attachable rotary tableA/C axis:360°Tailstock:For shaft machining (A-axis configuration)Tool magazin:Technology:Travelling chain magazineNumber of stations:48Tool changer:Double gripperMax. tool diameter:80 (130) mmMax. tool length:350 mmEquipment:Chip removal:Chip conveyorCoolant supply:Internal coolant, 70 barPendulum ...

Key data: 762 mm, 630 mm, 610 mm

Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg

Max. machining length: 2,600 mm Y-axis travel: 315 mm Travel Z-axis: 230 mm Speed of milling spindle infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping X and Y-axis CNC controlled, Z-axis infinitely adjustable motorized 4 pneumatic material tensioners Manual tool change Minimum quantity spraying device USB port Instruction manual

Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg

CNC Machining Center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of Make: 2005 Internal machine no. 59 Travels: X-axis 2,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 3,220 x 1,000 mm Table load: approx. 3,000 kg Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 20 - 5,000 rpm Accessories - Coolant filter system 900 l - Internal cooling - Chip conveyors - Electronic handwheel - Partition wall for pendulum machining - Magnetic plate 2x 1,000 x 800 mm - Table switch TS27R - Prepared for touch probes