boring mills and machining centers used for sale (3,137)

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/minSpindle power:26/20 kWmax. torque on the spindle:340/262 Nmtool taper:HSK-A 100 tool change unit:120 (2x60) Pos.Pallet changer 2x:630 x 630 mmtable load capacity:800 kgweight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyorCNC controlled U-axis enables radial movement of tool for variable spindling diamenter.twin pallet changer 630 x 630 mm6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axisspecial hydraulic pump for fixturecoolant through spindle (10-80bar), one ...

bore capacity in steel (diameter):100 mmmax. pitch circle:7000 mmnumber of spindles:2 bore spindle turning speed range:1 - 3000 U/minhigh speed spindle taper ISO:50 bore slide stroke:900 mmfeed speeds:1 - 6000 mm/minmax. workpiece weight:18000 kgtotal power requirement:125 kWdimensions of the machine ca.:13 x 11 x 5,1 mwith CNC SIEMENS 840 DWorkpiece clamping up to dia. 7000 mmThe machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 NmChip conveyor and coolant device

x-travel:2200 mmy-travel:2200 mmz-travel:1400 mmspindle taper ISO:50 spindle diameter in front bearing:110 mmspindle turning speed range:45 - 6000 U/minpallet table size:1000 x 1250 mmpallet worktable capacity:6000 kgfeed range:1 - 60000 rapid traverse:60 m/minspindle drive motor:27 kWdimensions of the machine ca.:15 x 8,5 x 5,7 mtotal power requirement:133 kVAweight of the machine ca.:50 tMachine with SIEMENS 840 D control- full B-axis- palette changer for 3 palettes- tool changer for 244 tools- coolant through spindle- max. workpiece swing 2200 mm

x-travel:1800 mmy-travel:1600 mmz-travel:1400 mmB-axis (table):360° size of pallet:1000 x 1250 mmworkpiece swing dia.:2100 mmworkpiece weight:3500 kgspindle taper ISO:50 spindle drive motor:37 kWspindle turning speed range:25 - 10000 U/minfeed range:40/50 m/minrapid power traverse circular:10 U/mintotal power requirement:90 kVAweight of the machine ca.:43 tdimensions of the machine ca.:11 x 9 x 4,5 mMachine with SIemens 840 D control for 4 axis- full B-axis- palette changer- tool changer for 150 tools- coolant device with coolant through spindle- chip conveyor

Pneumatic Tapping Machine Version with an adjustable angle, horizontal tapping possible Tapping machines for M3 - M12 threads, angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5)

x-travel:630 mmy-travel:630 mmz-travel:630 mmpallet size::400 x 500 mmspindle taper::HSK 63spindle turning speed - stepless:10 - 16000 U/mintotal power requirement:55 kWweight of the machine ca.:11 tMachine with SIEMENS 840 D control for 4 axis- digital drives- palette changer 4-fold- tool changer 160-fold - coolant device with coolant through spindle- full B-axis- chip conveyor- hydr. workpiece clamping

Bimak A50 M Industrial Column Drilling Machine Robust Bimak A50 M pillar drilling machine equipped with heavy cast iron construction, gear transmission and adjustable drilling table. The machine has multiple speed settings and is suitable for a variety of drilling tasks in steel, construction materials and machine parts. Thanks to its heavy industrial design, this machine is suitable for workshops, construction companies and maintenance departments. Offered in used condition with normal signs of wear.

spindle diameter:130 mmx-travel:2190 mmy-travel:1520 mmz-axis:1520 mmw-axis:1000 mmtable surface area:2000 x 1800 mmworkpiece weight:8 tspindle motor:18 kWspindle taper ISO:50 spindle turning speed range:4,5 - 900 U/minfaceplate diameter:785 mmrapid traverse:5 m/mintotal power requirement:40 kWdimensions of the machine ca.:5,5 x 6,9 x 5,2 mweight of the machine ca.:35 tMachine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control- inf. variable spindle spped- 4 x 90° table positioning- diverse toolholders- dDust exhauster

spindle diameter:120 mmx-travel:1250 mmy-travel:1250 mmz-travel:800 mmW-axis (spindle longitudinal):600 mmSpeed of boring spindles:1- 2000 U/min.spindle taper ISO:50 table surface area:1000 x 1000 mmtotal power requirement:55 kWweight of the machine ca.:18 twith CNC HEIDENHAIN TNC 426autom. toolchnager 40-pocketscoolant attachment

Gear Drilling Machine Tapping device Left / Right Run Tilt work table. Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging Dimensions: 2100 x 400 x 710mm Weight 260Kg Drilling capacity in steel 30 mm Projection 250 mm Drilling stroke 130 mm Spindle mount MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Feeds mm/U Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5)

x-travel:600 mmy-travel:580 mmz-travel:530 mmdistance spindle center to column:630 mmdistance spindle center to table:100-600 mmmilling feed range:1-10.000 mm/minmax. table load:200/100 kgmax. tool weight:8 kgpositioning accuracy:+/- 0,01 mm:8000/15000 1/minspindle drive:7,5/11,5 /5,5 kWrepeating accuracy:+/- 0,008 mmweight of the machine ca.:7,4 / 7,65 tBrand-new CNC vertical machining center with CNC control FANUC or HEIDENHAINWarranty: 12 monthsMore information can be found in the Appendix.

spindle diameter:200 mmx-travel:10000 mmy-travel:4000 mmz-axis:1500 mmW-axis (spindle longitudinal):1000 mmbore spindle turning speed range:1 - 2000 U/mindimension of the ram:600 x 530 mmhigh speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/minrapid motion - y-axis:8000 mm/minrapid traverse Z-axis:5 m/mintotal power requirement:120 kWweight of the machine ca.:135 tdimensions of the machine ca.:16,0 x 5,0 x 10,0 mwith CNC Steuerung HEIDENHAIN iTNC 530hydrostatic guideways x and Y- axisautom. toolchanger 40-pocketsautom. Pickup Station for angular milling head, universal milling head and facing headrotary table 3000 x 3000 mm , max load 60 to.v-axis 2500 mmchip conveyor and coolant attachment

x-travel:1100 mmy-travel:900 mmz-travel:1250 mmb-axis:360 000 x 0,001 °milling head speed:1 - 10000 U/minspindle taper: ISO:50 rapid traverse:60 m/minpallet size::630 x 630 total power requirement:37 kWweight of the machine ca.:25 twith CNC control SIEMENS 840 Dautom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kgthrough spindle coolantchip conveyor and coolant attachment make KNOLL

x-travel:800/945 mmy-travel:800 mmz-travel:600 mmspindle motor:27 kWspindle turning speed range:10 - 8000 U/minspindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kgtable clamping surface::800 630 mmtotal power requirement:55 kWweight of the machine ca.:16 tMachine with Heidenhain iTNC 530 CNC control for 5 axis- pendulum operation with turn- swivil table left and fixed table right- tool changer for 30 tools- coolant device, chip conveyor- complete splash housing

Unused, handbook available

spindle diameter:130 mmspindle diameter:130 mmx-travel:2190 mmy-travel:1520 mmz-travel:1000 mmw-axis:1075 mmtable surface area:2000 x 1800 mmworkpiece weight max.:8000 kgspindle turning speed range:4,5 x 900 U/minspindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/minfaceplate diameter:785 mmrapid traverse::5000 mm/mintotal power requirement:40 kWweight of the machine ca.:35 tdimensions of the machine ca.:5,5 x 6,9 x 5,2 mMachine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds- table indexing 4 x 90°- facing head 785 mm- exhauster- various arbors and tooling

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 €: 257.84 €: 1 : 30 mm: MK 3 : 280 mm: Stufe 1: 125 - 4000, Stuf U/min: 0,9 / 1,45 kW kW: M20 : 820 mm: 520 mm: 1900 mm: 320 kg: 0 - 300 mm/U: 240 - 790 mm: 420 x 340 mm: 125 mmDrilling capacity / normal drilling performance25/30 (in E335/ST60)Automatic feedDigital speed-, drilling depth and feed displayDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlTable height adjustment via toothed rackConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protectionElectronically infinitely variable feed incl. Spindle monitoringFree cutting deviceThread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth displayDrilling depth shut-off, programmable, easy operationDrilling ...

: neu : 2025 : 00774 : prompt, Zwischenverkauf v : Deutschland : 523.41 €: 1 : 100 mm: 32 mm: 12 kgVice [felix] 2.0 100Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm)Taper mandrel B18/MK IIReducing sleeve MK II/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 €: 1 : 150 mm: 40 mm: 33 kgVice [felix] 2.0 150Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm)Taper mandrel B18/MK IVReducing sleeve MK III/MK IIReducing sleeve MK III/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 257.02 €: 80 mm: 28 mm: 120 mm: 12 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Speed: 810 rpm Voltage: 230V Frequency: 50Hz Power: 1600W Maximum diameter: 35 mm Maximum Attraction: 16000 N

Vertical machining centre HYUNDAI SPT-V550D - corse 570x410x580 mm, CNC SIEMENS 810D - rotopallet, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 650x410 mm (2), Longitudinal travel x axis: 570 mm, Cross travel y axis: 410 mm, Vertical travel z axis: 580 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 24, Spindle speed: 0- 10.000 rpm, Spindle motor power: 18,5 Kw, Cnc: SIEMENS 810D, Approx net weight: 6.000 Kg, accessories: coolant thrugh spindle

Max. drilling diameter: 13 mm (steel) and 40 mm (wood), power: 710 W, laser positioning system, with machine vice and drill bit set

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

distance spindle /table:min /max 190 / 570 mmdistance spindle /table:190 - 570 mmsurface area:650 x 300 mmBoring power:in GG 20 40 mmbore capacity in steel:ST 60 32 mmturning speed range::50 - 5000 UpMtotal power requirement:2,2 kWthreading:GG 20 M30 threading::ST 60 M 24 weight of the machine ca.:1400 kgtable load:max. 150 kgtable height:770 mmtraversing speed:max X-, Y- u. W-Achse 5 m/min max.traversing speed:Z-Achse 3 m/minw-axis:380 mmworkpiece height max.:495 mmtool changing time:ca. 3 secx-travel:450 mmy-travel:300 mmz-travel:180 mmworkpiece weight:1,5 kg

x-travel:800 mmy-travel:690 mmz-travel:630 mmtotal power requirement:76 kWweight of the machine ca.:25,5 tb-axis:630 Rundeinheit control:Siemens 840 D workpiece weight:max . 1.100 kgspindle turning speed range:15000 U/minBoring power:30 mmplate size:630 x 630 mmDimension:6000 x 2900 x 2400 mmspindle taper::HSK 63 Documents:vorhanden

x-travel:630 mmy-travel:560 mmz-travel:560 mmtotal power requirement:10 /15 kWweight of the machine ca.:6500 kgdimensions of the machine ca.: 4,4 x 5,4 x 2,9 mTable dimensions:1000 x 610 mmLoading:400 kgrapid traverse::X 26, Y 26, Z 20 m/minspeeds::20 - 12.000 min -1tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St.control:CNC MillPlus/TNC430 Documents:vorhanden

bore capacity in steel (diameter):63 mmarm length:2000 mmworkpiece height max.:135 mmspindle stroke:400 mmreus:16 Stufentable-size:630 x 800 mmtool taper:MK 5 speeds:20 - 1600 U/minspindle feeds::0,04- 32 mm/Uwork table::800 x 630 x 550 mmtotal power requirement:5,5 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:3100 x 1250 x 2500 mmYear:ca. 1990

bore capacity in steel (diameter):63 mmarm length:2000 mmworkpiece height max.:135 mmspindle stroke:400 mmreus:16 Stufentable-size:630 x 800 mmtool taper:MK 5 speeds:20 - 1600 U/minspindle feeds::0,04- 32 mm/Uwork table::800 x 630 x 550 mmtotal power requirement:5,5 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:3100 x 1250 x 2500 mmYear:ca. 1990