machines and plants for process engineering used for sale (7,498)

Sell used tubular heat exchanger (stainless steel) in a 40 foot ISO container. Just set it up, plug it in Transportable steel container with good accessibility, two doors. Container is divided into two separate rooms. In one room there is a tube heat exchanger, pneumatic gate valves and piping for substrate distribution, heating distributors, heat pump, expansion tank, etc. and other space can be used as a small office. The waste heat from the CHP plant can be used to heat the substrate via the pipes, e.g. in winter when the temperature drops. Two further connections for external heating, e.g. tank inner tube heating and for external dryer are available! The tubular heat exchanger can also be used only as a central pump distribution station. There are two connections each (supply and return, suction-pressure side) of the fermenter, secondary digester and substrate end bear ...

Two identical VAG diaphragm check valves are available. Nominal size: DN350, pressure rating: PN10, max. operating pressure: 10bar, max. operating temperature: 50°C, medium: water (1st stage filtrate), face-to-face length: 800mm, flange outside diameter: 505mm, flange thickness: 30mm, bolt circle diameter: 460mm, weight: approx. 280kg. Including two flange-to-flange pipe sections. Both items were only in contact with 1st stage filtrate in a drinking water treatment plant. Documentation available. An on-site inspection is possible.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Electronicon, Capacitor MKP 18 µF -Type: E12.D78-401 800 -Number: 2x capacitors present -Price: per piece -Dimensions: Ø 35 x 105 mm -Weight: 0.1 kg/pc.

Level limit switch, level measuring device, sensor, switch, level transmitter, limit level detector, limit switch, level switch, level sensor -Manufacturer: Endress+Hauser, boundary level detector set, unused, original packaging -Type: Liquiphant FTL31-11V0/0 -Quantity: 1 detector available -Cardboard dimensions: 300/120/H115 mm -Weight: 0.5 kg

New 100.000 litre tank, Stock number: T100F6-1, Litre: 100.000, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 10500 mm., Total height: H 10959 mm., Plate type: The tank is made of pickled B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New portable homogenizer with a rotor diameter of 145 mm, made of AISI 316L in all parts in contact with the product and polished finish Ra < 0.80 μm. It withstands vacuum and a working pressure of 16 bar, and its motor has a power of 7.5 kW, which provides a rotational speed of 2,930 rpm. It includes an atmospheric solids suction system, which allows the injection of powdered solids directly into the homogenizer suction. This process solves floating solids inclusion issues and improves processing time if all other ingredients are loaded through the hopper as they are added directly to the homogenizing chamber. The hopper has a capacity of 50 liters and has a butterfly valve, which allows both closing it and regulating the inlet flow. All elements are mounted on a trolley with wheels for easy mobility. Production 5,000 L/h Motor 7.5 kW at 2,930 rpm 50 Hz DN50 suction DN50 ...

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Telemecanique, Schütz Square D Ovp -Type: LC1D65008M5 007302 -Number: 1x contactor available -Cardboard dimensions: 130/90/H135 mm -Weight: 1.4 kg

2,000-liter stainless steel reactor with jacket and heat-insulation, manufactured by GINOX Industries in 2004. Equipped with an anchor-type agitation and 4 electric resistors in the jacket. Year of manufacture 2004 Working Body Pressure ATM Bar Body working temperature 150 ºC Working pressure of half a round/ATM jacket bar Half-round volume/jacket 0.825 L Coil working temperature 150 ºC Agitation Type Ancora In its state.

New COSMOS 250 emulsifier reactor, manufactured by COMQUIMA in 2026. Stainless steel skid, AISI 316 on all parts in contact with the product, and with a useful capacity of 250 liters. It consists of a jacketed reactor and an agitation system with scrapers and homogenization: AGITATION: FULLVISC laminar displacement system with scrapers. Exclusive 3-arm design with scrapers. Rated speed of 40 rpm and power of 4 kW. HOMOGENIZATION: M.X.O.N. 120 High Shear Emulsifier. Mechanical seal with safety seal. Rated speed of 2,900 rpm and power of 5.5 kW. Designed to centralize the manufacture of fine emulsions, suspensions and high viscosity products in a single piece of equipment, easily manageable through pallet truck or toro. It allows products to be processed up to 70,000 cps and a particle size of 10 μm can be achieved. The unit is controlled by an integrated control  ...

Kuijpers pump type 666 – 7.5 kW – 311 rpm – DN100 – stainless steel – very good condition For sale is a used Kuijpers pump type 666 in very good condition. Technical data: Manufacturer: Kuijpers Type: 666 Motor power: 7.5 kW Speed: 311 rpm Flange connections: DN100 Pump housing: stainless steel Thrust piece: stainless steel Impeller: Hard stainless steel The pump is in excellent technical condition and is ready for immediate use. Thanks to the high-quality stainless steel design, it is ideal for demanding applications in industry and agriculture. Viewing possible by appointment

The blower stage has been completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

There are 2 GM 240 S units available. The blowers can be adjusted to your performance data. If you have any questions, please feel free to contact us.

Manufacturer: Hegla Year of manufacture: February 2002 Model: VSG-A 46 MT Type of machine: Cutting system for laminated safety glass (VSG) Running direction: right to left Connected load: 35 kW Dimensions of the system (width x height x length): 13.2 x 6 x 1 meters Maximum glass size (width x height): 4600 x 3210 mm Maximum single glass thickness: 16 mm Condition: Rated 2 out of 6 (good), where 1 is very good and 6 is unsatisfactory Operational status: Operational (yes) Additional equipment: Annual maintenance carried out by Hegla Additional documentation included: Operating manual, wiring diagram, layout drawing Remarks: Stops are worn in line with the age of the machine; mechanical alignment required Find more here - / Contact us at -

Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A

Mixing tanks Manufacturer: Becomix Type M 15 Technical specifications Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display, Additional title: Reverse osmosis for desalination of raw water, Flow rate: 6000 l/h depending on the blending quantity, Max. operating overpressure: 14 bar, Recovery appr.: 82 %, Water: 5 - 7 m³/h; 1 - 10 bar, Operation / ...

Cylindroconical stainless steel tank, most recently used for settling diatomaceous earth. Fitted with drainage connections in the cylindrical section and aeration connections in the conical section., Additional title: KG settling tank, Content: 4450 l, Max. working pressure: 80 °C, Length: 1710 mm, Width: 1710 mm, Height: 3550 mm, Weight: 450 kg, Material: stainless steel 1.4301, Position: vertical cylindro-conical tank, Base construction: on pipe feet, Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel agitator tank, Capacity: 50000 l, Length: ca. 3,2 m, Width: ca. 3,2 m, Material: Stainless steel, Position: Vertical, Features: Agitator

Vertical stainless steel tank with agitator, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical agitator tank from stainless steel, Capacity: 100000 l, Material: Stainless steel, Position: Vertical, Features: Agitator

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel tank, Capacity: 150000 l, Material: Stainless steel, Position: Vertical

Bioreactor with pH, oxygen and temperature measurement. Membrane aerators are also included., Additional title: Vertical stainless steel tank with membrane ventilators and pump system, Capacity: 240 m³, Width: 7,1 m, Material: Stainless steel, Position: vertical, Features: Membrane aerators; pH measurement; oxygen measurement; temperature measurement; pump station inlet

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: vertical stainless steel tank, Capacity: 100000 l, Material: Stainless steel, Position: Vertical

Station for preparing flocculation aids.

Vertical stainless steel tank, most recently part of a microbiological wastewater treatment plant., Additional title: Vertical stainless steel tank with agitator, Capacity: 70000 l, Length: appr. 3,8 m, Width: appr. 3,8 m, Material: Stainless steel, Position: Vertical, Features: Outlet pump 2,2 kW, (flow rate 19m3/h); Agitator

Sewage sludge tank made of stainless steel, with insulation, agitator and side tapping., Additional title: Stainless steel tank with insulation, Capacity: 100000 l, Operating temperature: 80 °C, Material: Stainless steel, Position: Standing on concrete foundation, Base construction: Cylindrical tank with flat bottom, Features: Insulation with stainless steel cladding, feed pump (volume flow 12m3/h); agitator, ladder with back protection, tank top railing,

Decanter centrifuge for thickening municipal, industrial and biological sludge, Additional title: Sludge dewatering system, Capacity: 15000 l/h, Weight: 640 kg, Position: To be mounted on the customers substructure, Features: Operating platform

Kaeser air compressor, Additional title: Screw compressor

Decanter centrifuge for thickening municipal, industrial and biological sludge, Additional title: Sludge dewatering system, Throughput capacity: 15000 l/h, Weight: 545 kg, Position: To be mounted on the customers substructure, Features: Operating platform

Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter