machines and plants for process engineering used for sale (7,498)

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Water degassing module. Suitable for integration into existing control systems., Additional title: cold degassing, Capacity: 5000 l/h, Residual oxygen content: 0,03 mg/l, Column volume approx.: 300 l, Operating temperature: 95 °C, Operation / Control: PLC / visualization by customer, Material: Stainless steel 1.4301 (AISI 304), Base construction: Height-adjustable feet, Features: Two-chamber column; water pump;

Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - / Contact us at -

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - / Contact us at -

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

: mit Magazin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspection is possible.

Stock number: A226, Volumen: 2,813/2,910 litre, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 2,52 m², Working temperature: -10/+150° C, Working pressure: Max 16 bar, Dimensions: L 180 x W 180 x H 630 mm., Connections: 4 pcs. Ø 1½, Manufacturer: Danfoss, Type: XGM032H-1-60, Year: 2017, Other: Specially developed for district heating and district cooling systems

Stock number: PC9240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 0,75 kW - 220/380 Volt - 2900 rpm., Theoretical capacity: 5350 l/h., Stage: 1, Working pressure : Max 3,4 bar, Working temperature: Max 90° C, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Pedrollo, Type: CP 158 - ST6

The PI-LID inspection system, including the camera used, but it doesn´t contain specific pricing information. To find the price of the "Prisma CCD color line camera" or other components (like the LED lighting system or image processing computer), you would need to consult suppliers or manufacturers specializing in industrial inspection cameras. You can search for similar CCD line cameras on s like: - Vision Components - Basler - Teledyne DALSA - Edmund Optics The PI-LID (Print Inspection Lid) system is a high-speed vision inspection system designed for the print quality inspection of lids, cans, cups, and tubes. It is typically integrated into printing machines and helps ensure that printed materials on these surfaces meet quality standards. Here’s a breakdown of the key features and how it works: 1. Purpose and Usage - Application: It inspects the print quality on lids or cylin ...

Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...

Engel ES 2550/500 HL Hours - 119209 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufacture -  ...

Engel Victory 350/1800 Hours - 73686 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.828 Maximum shot volume cm3/g 1039 Injection pressure maximum hydr/spec bar 2199 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 3500 Maximum opening stroke (distance between the platens) mm 1358 Minimum installation height mm 450 Distance between tie bars Horizontal mm not applicable Distance between tie bars vertical mm not applicable Centering ring Diameter nozzle side mm 160 Centering ring Diameter ejector side mm 160 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 1 Core pulls DS Pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes (servo) C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manuf ...

Engel ES 1350/350 HL Hours - 122266 Injection unit Screw diameter mm 55 Screw peripheral speed m/s 0.733 Maximum shot volume cm3/g 618 Injection pressure maximum hydr/spec bar 2183 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 3500 Maximum opening stroke (distance between the platens) mm 1305 Minimum installation height mm 350 Horizontal tie bar spacing mm not applicable Distance between tie bars vertical mm not applicable Centering ring Diameter nozzle side mm 160 Centering ring Diameter ejector side mm 160 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 0 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufacture - 2005 Perip ...

Dissolver Niemann KDV 491-50 Power 37 kW Speed range 300-1400 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Dissolver Niemann KDV 241-25 Power 18 kW Speed range 290-1650 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical a ...

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: Siemens, Sirius Contactor Auxiliary Switch Block Power Contactor -Type: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 -Number: 1x contactor available -Cardboard dimensions: 210/150/H80 mm -Weight: 1.9 kg

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Used decanter centrifuge from GEA Westfalia type UCD 305-00-32. Year of manufacture 2020. Control included. Centrifuge after technical inspection, ready for operation.

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible.

Used disc centrifuge from WSK Kraków type MAPX 309. Centrifuge under renovation. The centrifuge worked on cooking oils. Capacity 10,000 l/h.

Manufacturer: WILD INDAG, now part of the SPX Flow Group Type: INO1 CC 160 VT TS100 Year of Make: 2010 Working Principle: Rotary Lobe Pump Max. pressure: 16 bar Drive: SEW-Eurodrive 5.5 kW geared motor Most recently used in butter production Version for food applications Condition: very good

Drying cabinet vacuum tray dryer, tray dryer, Zschocke 630 liters I offer a vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel (food-safe) on the inside and allows drying under vacuum up to 1 mbar (depending on the drying material and connected pump). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Technical data: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke A ...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible.

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...