machines and plants for process engineering used for sale (7,467)

Dissolver Niemann KDV 1500-136 Explosion-proof design Power 100 kW Speed range 270-800 1/min Niemann Speed controll electric container collet Complete with control cabinet Documentation available Very good condition, straight from production

issolver Niemann KDV 790-79 Explosion-proof design Power 58 kW Speed range 290-1000 1/min Complete with control cabinet Very good condition, straight from production

Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible.

Spirax Sarco PHS Easiheat Heat exchanger system 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

Designed for the treatment and removal of Volatile Organic Compounds VOCs. Nominal capacity: 18,000 Nm3 per hour. Three-tower regenerative configuration, Honeywell Eclipse natural gas burner rated up to 586 kW, 30 kW ATEX main fan, Siemens PLC control and 10 m stack. The supply includes two stripping columns for the pretreatment of process water. The second Tecnium column, with a capacity of 8 to 10 m3 per hour, is currently dismantled and requires localized repair at the base. The equipment is available in El Prat, Barcelona, Spain. Dismantling, loading, transport, and commissioning are not included.

ARTPOL THERM brand pressure tank model ZT-122, with a capacity of 8 liters, manufactured in 2022 and intended for industrial facilities. The equipment has a vertical cylindrical construction with domed bottoms and has several process connections, auxiliary valves and a side circuit. It has a maximum operating pressure of 10 bar and a test pressure of 15 bar, with a working temperature range of -30 to +120 °C. Equipment weight: 5.5 kg. Total capacity 8 L Material: Stainless Steel Technical characteristics Model ZT-122 Working body pressure 10 bar Body working temperature -30 +120 ºC Working Conditions: Pressure Transportation Information Weight 5.5 Kg No documentation Unused

Vertical stainless steel tank with a capacity of 1200 litres, manufactured by OLIVER Y BATLLE, model DIL-1200, year 2000. The equipment is equipped with a stirring system by means of an agitator driven by an 11 kW motor at 1460 rpm, 50 Hz and 400 V, with PL 125/2 EO gearbox and a reduction ratio of 20.96 i. The tank is built on legs and has a Klopper-type upper and lower bottom, as well as a 450 mm diameter manhole at the upper bottom. It has top connections of 2 x DN50, 2 x DN25 and 2 x 1" connections. The discharge is DN80. The body has an inner diameter of 1190 mm, a height of 1100 mm and a thickness of 4 mm. Both the upper and lower depths are 4 mm thick. The equipment has transport dimensions of 1450 x 1450 x 3950 mm and a weight of approximately 1000 kg. Total capacity 1200 L Material: Stainless Steel Technical characteristics Model DIL-1200 Year of manufacture  ...

Vertical stainless steel tank of the APV BAKER IBERICA brand, 4,800 liters., manufactured in 1989, the equipment has a configuration on legs, with upper and lower bottoms of conical geometry and agitation system by means of a three-blade propeller. The tank is equipped with a Ø450 mm upper manhole, two Ø180 mm sight glasses and different connections for process integration. It has a side socket for sampling, DIN20 and 3/4" side connections and DIN32 and DIN50 top connections. The body and both bottoms are 3 mm thick. The discharge is 240 mm high with a 2" junction Volume Total capacity 4800 L Material: Stainless Steel Technical characteristics Year of manufacture 1989 Vertical Orientation and Installation Tripala helix agitation On legs Tapered bottom Tapered top bottom Manhole on top bottom Equipment dimensions Body height 1000 mm Body thickness 3 mm Bott ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

M.T.A. TAE 502 – Industrial Chiller / Process Water Chiller / Chiller For sale is a used industrial refrigeration unit M.T.A. TAE 502, built in 2003. The cooling unit was used as part of an industrial TRUMPF laser system and was used to cool the laser system. Technical data according to the nameplate: Manufacturer: M.T.A. SRL Model No.: TAE 502 Year of Make: 2003 Serial number: 2200 018 351 Voltage: 400 V Phases: 3 Frequency: 50 Hz Max. current consumption: 100 A Installed capacity: 59.0 kW Degree of protection: IP54 Max. operating pressure water circuit: 6.0 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant charge: 2 × 15.0 kg Max. refrigerant pressure: 22.6 bar LP / 28.0 bar HP Permissible ambient temperature: 5–40 °C Weight: approx. 1,430 kg The device is currently in storage and is not connected. An up-to-date functional test or demonstra ...

Used juice belt press made by AMOS, model AEP 20 , with a grinding system and a pallet generator. Belt with a capacity of 1 meter per hour, i.e. about 3 tons.

Almost unused 6-ribbon industrial mixer made by MLYNPOL, model MP-3000 . Designed for food and industrial applications. Key technical specifications: · Capacity: 3,000 L · Main motor: 22 kW · Mixing time: 4–5 minutes · Discharge time: 30–60 seconds · Discharge accuracy: 99.5% · Grinder speed: 920 RPM · Operating temperature: –5°C to +45°C · Dimensions: 5,100 × 1,340 × 1,950 mm (L × W × H) Features and Equipment: · Main agitator + 2 high-speed side grinders · Top loading, central bottom discharge · Frequency converter and electrically controlled discharge gate · Robust construction ensuring a long service life Applications: The mixer is ideally suited for mixing, among other things, sugar, starch, coffee, salt, powdered concentrates, powdered sugar, tea, grains, dried fruit, powdered milk, chemical and pharm ...

Becker VTLF2.500/0-79 Vacuum pump 2021, speed 950 min -1, Power 11Kw, Inlet capacity 490 m3/h, Max vacuum 250 mbar, 3Ph

3-stage evaporator made by Manzini. Juice flow rate: 5000 L/h Ira 7 aroma catcher, juice flow rate: 7000 L/h Manufacturer: Manzini New: 1979 Type: 3-stage falling film Aroma recovery: none Evaporation capacity: approx. 6 t H₂O/h Steam consumption: approx. 2.8 t/h Specific steam loss: approx. 0.43 kg/kg of evaporated water Electrical power consumption: approx. 80 kW Operating power: approx. 120 kW

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: ETI, Motor protection switch, original packaging -Type: MS25-10 004600100 -Triggering range: 6.3 - 10 A -Number: 1x switch available -Cardboard dimensions: 85/45/H90 mm -Weight: 0.3 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: ABB, Contactor Schütz -Type: A9-30-10 -Number: 2x contactors available -Price: per piece -Dimensions: 75/45/H75 mm -Weight: 0.3 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: ABB, Motor protection switch -Type: MS116-6.3 -Triggering range: 4.0 - 6.3 A -Number: 2x switches available -Price: per piece -Dimensions: 90/45/H90 mm -Weight: 0.3 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, time-delay relay, motor contactor, auxiliary contactor -Manufacturer: ABB, Electronic time relay -Type: CT-VWE -Time range: 0.1 - 10 s -Quantity: 1 piece available -Dimensions: 80/20/H80 mm -Weight: 0.1 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Moeller, circuit breaker, load break switch 80 A -Type: NZM7-80 -Quantity: 1x load break switch available -Dimensions: 110/105/H190 mm -Weight: 2.1 kg

Rotary lobe blowers / Roots blowers without drive or attachments from Aerzen.

Rotary lobe blowers / Roots blowers without drive or attachments from Aerzen.

GRP - fan for conveying corrosive or aggressive gases. Due to the size the fan housing is dismantled at the moment.

PE-storage tank with centrifugal pump and UV-unit for germinating fresh water.

closed double-walled insulated stainless steel container (without agitator) with hinged cover. Bath heater / temperature sensor / temperature limiter / level probe and temperature display device.