milling machines used for sale (2,402)

Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631

x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,22,22,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale good working CNC milling machine Deckel FP4 AT with two vices and several tools.

Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

Crankshaft milling machine GFM FKP-60 CNC Mfg. 1984. Very good condition. Very low working hours Max. work piece length: 6000mm Max. working length: 5800mm Center height (without retaining wedge): 2100mm Max. stroke of clamping head: 5800mm Max. stroke of longitudinal carriage: 5995mm Max. stroke of portal: -X axes (horizontal): 910mm (2x 442+13) mm Max. stroke of milling carriage -Y axes (vertical): 910mm (2x 442+13)mm Rapid Speed of longitudinal carriage: 3975mm/minute Rapid Speed of portal: 2982mm/minute Rapid Speed of milling carriage: 2982mm/minute Portal feeds:0...2000mm/minute Milling carriage feeds: 0...2000mm/minute Power: 200kW Cutting head diameter: 720mm Outer diameter of cutting head:1680mm Cutting head RPM: 41.5-48-54.4 Cutting speed: 95-110-125m/minute Cutting head diameter: 1050mm Outer diameter of cutting head:1680mm Cutting ...

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T (We have a second machine for spare parts)

x-travel: 19000 mmy-travel: 7600 mmz-travel: 2000 mmw-axis: 5000 mmtable surface area: 18500 x 5000 mmtable load: max. 500 tdistance between columns: 5500 mmpower capacity - milling spindle: 110 kWtool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kWweight of the machine ca.: 650 tOverhauled & modernized in 2007equipped with:- CNC control FANUC 15i MB- 5 headsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

Stock number: 3914 PROCESSING Manufacturer: FEELER, Type: FV 800A Machines NO.: VG806, Year of manufacture: 1999 Specifications: Table size 950x425 mm Large table load 500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 450 mm Vertical movement (Z) 505 mm Spindle Taper 40 ISO Spindle speeds 6000 rpm Total power 5.5 kW Tool changer 24 places Rapid traverse X/Y/Z 18/18/15 m/min Control Mitsubishi Meldas 500 Fabr. Controlled in axes 3 Accessories: Cooling water system. Machinery vise. Tool holders pcs Operating instructions Length: 3060mm, Height: 2735mm, Width: 2300mm, Weight: 4100Kg

Milling machine Aciera F4 Travel XYZ: 400-175-450mm Spindle holder: ISO 30 Spindle speeds: 50-3400. Table size: 900x350mm. · Automatic feed on X and Z axis 10-600mm/min · Rapid traverse on both axes 1500mm/min . Drill quill · With some tools · Cleaned and maintained and now ready to use

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

bore capacity in steel (diameter): 110 mmx-travel: 2.100 mmy-travel: 1.500 mmz-travel: 1.000 mmw-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVAWorking Spindle: - boring quill diameter: 110 mmspindle taper: DIN 69871 ISO 50 spindle power: 22 kWtransmission ratio: 2 turning speed range: 2.000 U/minclamping table: - max. workpiece weight: 4.000 kgsurface area: 1.100 x 1.300 mmfeeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/minfeed range W-axis: 0 - 10.000 mm/minrapid motion - x-axis: 10.000 mm/minrapid feed Y, Z, W-axis: 10.000 mm/minControl: total power requirement: 22 kWweight of the machine ca.: 23.000 kgdimensions of the machine ca.: 7,1 x 6,5 x 3,7 mEquipment.• CNC-control HEIDENHAIN 430• support bearing• manual milling head• coolant tank with pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.000 mmy-travel: 1.600 mmz-travel: 1.200 mmcontrol: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 °C-axis (milling head rotation axis): +/- 240 °feed and rapid traverse: : Rapid traverse B- and C-Axis: 50 rpmrapid feed Y,X,Z: 40.000 m/minAccelerations (X, Y and Z): 4 m/s²Machine table:: : Clamping surface: 3.500 x 1.750 mmT-slots: 27 x 22 mm H12 T-slot - distance: 125 mmmax. workpiece load: 7.000 kg/m2Max. distance table to spindle nose: 1.356 mm2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1Drive power (S1/S6):: 42/50 KWTorque (S1/S6):: 67/84 NmTool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mmmax. tool-Ø adjacent slots free : 125 mmmax. tool length: 300 mmmax. tool weight: 12 kgcoolant equipment: : tank capacity: 1.400 lconnected load: voltage: 3x 40 V 50 Hz power requirement:  ...

Key data: 500 mm, 400 mm, 300 mm

Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

x-travel: 1500 mmy-travel: 1500 / 1000 mmz-travel: 975 mmControl: Fidia total power requirement: 20 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 5 x 6 x 4 mNo. 30875-axis milling machine BOHNER & KÖHLE VH 2 / 10 KWorking area: 1500 x 1500 (1000) x 975Drive: 14 kWControl: Control Fidia V 7.2Table 2500 x 1000 mm16-fold tool changer KelchSpindle holder SK 50Spindle speeds 40-5600 min-1Projection of milling spindle 1030 mmWeight 12500 kgGewicht 12500 kg13,5 LademeterGrößte Transportbreite 3 mGrößte Transporthöhe 3,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Contour - 3 / Dialog 4 total power requirement: 5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 5267:Universal tool milling machinesMake DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unitWorking area: 300 x 300 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 430 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 3999Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400Drive: 3Control: Heidenhain TNC 135Fixed table 800 x 390 mmchip traydocumentationSpindle SK 40Speed range 50 - 2500 min-1Space requirement approx. 3 x 3 x 2 mWeight approx. 1400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmControl: Contour 3 / Dialog 4 total power requirement: 5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 5268:Universal tool milling machineMake DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unitWorking area: 300 x 300 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 500 mmControl: Sinumerik 880 total power requirement: 9 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 x 3 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 560 mmz-travel: 450 mmtotal power requirement: 3 kWweight of the machine ca.: je 2,5 tdimensions of the machine ca.: je 332,5 mBundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 2456Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Drive: 4 kWDigital display MitutojoUniversal built-in rotary table 1050 x 627 mmQuill feed gear 0.02 - 2 mm/revSpindle ISO 40,Speed range 32 - 1600 1/min,feeds 5-500 mm/min,rapid traverse 1.4 (0.7) m/minCross table movement by hand 225 mm,Table top rotation 360 °Table swivel/tilting +- 30 ° eachSpace requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 to.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.