milling machines used for sale (2,403)

x-travel: 720 mmy-travel: 360 mmz-travel: 420 mmtotal power requirement: 8 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,56 x 2,56 x 1,82 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,22,22,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

x-travel: 700 mmy-travel: 800 mmz-travel: 800 mmcontrol: Siemens 840D total power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: 5,2 x 3,8 x 3 mBrand Deckel MahoMachine no F630Type DMC 70 H duo BlockCNC Brand SiemensCNC Type Siemens 840D powerlineYear of make 2006Table length 500 mmTable width 500 mmNumber of pallets 2X 700 mmY 800 mmZ 800 mmSpindle taper SK 40Speed maximum 18.000 RPMMachine size 5.200 x 3.800 x 3.000 mmMachine weight 18.500 kgTool magazine positions: 120The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: Siemens 840D total power requirement: 13/9 kWweight of the machine ca.: 4,7 tdimensions of the machine ca.: 3,4 x 2,5 x 2,2 mBrand DMG Mori SeikiMachine no F652Type DMU 50 EcolineControl Siemens 840DYear of make 2012Table width 500 mmTable diameter 630 mm øTable adjustable in degrees X 500 mmY 450 mmZ 400 mmSpindle taper SK40Speed minimum 20 RPMSpeed maximum 10.000 RPMMaximum table load 200 kgChip transport Machine size 3.400 x 2.500 x 2.200 mmMachine weight 4.700 kgTool magazine positions: 30B-as: -5/+110 °C-as: 360 °Engine power: 13/9 KwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 13000 mm, 4500 mm, 1000 mm

CNC gantry milling machine (for aluminum skin drilling/milling operations) MTorres MGP-51350-TT Year of construction 2003 Siemens Sinumerik 840D CNC Control Travel: X 13,000 mm - Portal longitudinal path Y 4,500 mm - Crossbeam path of the milling support Z 1,000 mm – Milling ram vertical travel Positioning speed / rapid traverse speed 15,000 mm/min. 2-axis rotary/swivel milling head A & C A-bushes simultaneously Positioning speeds / rapid traverse speeds 10 rpm. Spindle drive power 20 kW Spindle speeds up to max. 30,000 rpm (electrospindle) 20-fold tool changer Tool diameter max. 80 mm Tool length max. 125 mm Tool weight max. 10 kg 16 units TorresTool pogo stick clamping system - NC controlled 5-axis gantry milling and drilling machine. Designed for high-speed milling and drilling of aircraft structural compone ...

x-travel: 5.500 mmy-travel: 1.400 mmz-travel: 1.000 mmcontrol: HEIDENHAIN iTNC 530 clamping table: - surface area: 6.000 x 1.200 mmmax. workpiece weight: 13.500 kg/m²Nc rotary table: - position: rechts, bündig integriert in Tischflächesurface area: Ø 1.000 mmpositioning accuracy: 360 x 0,001 mmT-slot number x size: 12 x 22 Abstand 100 mm Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 28 kWSpeed range, stepless: 15 - 5.000 min-1max. torque: 815 Nmtool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 80 Plätze diameter of tools max.: 125/200 mmworkpiece length: 400 mmweight of tools max.: 20 kgchanging positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/minrapid in X/Y/Z: 25.000 m/minmax. feed ...

Fully functional Mikron Milling Machine Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Key data: 4700 mm, 6100 mm, 1470 mm

Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

x-travel: 24000 mmy-travel: 3000 mmz-travel: 1250 mmspindle turning speed - stepless: 4000 U/minspindle taper ISO: 50 spindle motor: 37 kWfeeds longditudinal/cross/vertical: 6000 mm/minrapid motion -longitudinal/cross/vertical: 15 m/minno. of tools in the magazine: 60 Stückcontrol: HEIDENHAIN TNC 426 Mtotal power requirement: - kWweight of the machine ca.: - t- CNC control HEIDENHAIN TNC 426 M- Automatic head 360° x 144 positions. - ISO 50- Spindle extension L600- ATC 60 positions- Spindle cooling (internal) 20 bar- Workpiece probe- Chip conveyor- Hydrostatic in x/y/z/a- Rigid tapping- preparation for horizontal HeadThere are no tablesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4000 mm, 2700 mm, 1250 mm

Year of manufacture: 2024 Steuer / Control: Heidenhain TCN640 inkl. HR520 Handrad - handwheel Arbeitsbereich / Working Ranges X-axis / X-axis: 4,000 mm Y-axis / Y-axis: 2,700 mm Z-axis / Z-axis. 1,250 mm Clamping table: aluminium table with T-slots at a distance of 250 mm Milling Unit / Milling Head Spindle power: 22 / 25 kW Spindle speed / rotation speed: Max. 24,000 min-1 Drehmoment / torque: 18 Nm Tool holder: HSK 63A Drives Linear Axes / Feed & Acceleration Feed speed X/Y-axis / max feedrate X/Y-axis. Up to 60/40 m/min Feed speed Z-axis / max feedrate Z-axis: Up to 35 m/min Electrical Connection Values / Electronic Consumption Spannung / voltage: 400 V Frequenz / frequency: 50 Hz Fuse / current power: 45 A Power requirement / power required: 25 kVA Dimensions & Weight & Dimensions: Required space: approx. 9,100 x 5,100 x 4,400 mm Total weight /  ...

Key data: 3100 mm, 2100 mm, 1000 mm

First commissioning: 2024 Control: OSAI Arbeitsbereich / Working Ranges X-axis: 3,100 mm Y-axis: 2,100 mm Z-axis: 1,000 mm Clamping table: 3,100 x 2,100 mm T-slot spacing: 250 mm Table load: 1,000 kg Milling unit: Spindle power:10 kW Spindle speed: Max. 24,000 min-1 Torque: 10.9 Nm Tool holder: HSK 63F Drives Linear Axes Feed speed X/Y axis: up to 40 m/min Z-axis feed speed: up to 25m/min Electrical connected loads: Voltage: 400 V Frequency: 50 Hz Fuse: 45 A Power requirement: 35 kVA Dimensions & Weights: Machine space requirements: approx. 4,800 x 5,000 x 4,300 mm Total weight: approx. 6.5 tons Colour: light grey Auxiliary: - 15-fold tool changer - Mobile control panel Machine Condition: New Availability: Immediate - subject to prior sale

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...

CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.

Inv. Num. : 7816 Type: FGS 130 Producer: Droop Created: 1983 Parameters: Work table length: 4200 mm Work table width: 1200 mm Maximum workpiece weight: 10000 kg Spindle drive power: 22 kW X-axis travel: 3000 mm Y-axis travel: 650 mm Travel travel Z-axis: 350 mm Machine length: 7000 mm Machine width: 4000 mm Machine weight: 39500 kg

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

x-travel: 1000 mmy-travel: 380 mmz-travel: 430 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 4471Universal milling machine IBERIMEX U 1000Working area: 1000 x 540 x 430Drive: 5.5 kWControl: Visulesta 4 digital displayTable clamping surface 1500 x 360 mmdocumentationSpindle holder ISO 50Speed range 40 - 1750 min-1Space requirement approx. 2 (3) x 2 x 2 mWeight approx. 3 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.

Key data: 1000 mm, 750 mm, 750 mm

Travel X/Y/Z: 1000/750/750 mm Tool changer: ISO 40, 30 places Spindle speed: 12000 rpm Control: Heidenhain TNC 426 Machine is still under power... If you have any questions, just call or write.

Offer 24309 Specifications: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mech./ hand 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance between milling spindle and table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds regulated horizontally in 16 steps. 56 - 1800 rpm - Spindle speeds regulated vertically in 16 steps. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

x-travel: ca. 900 mmy-travel: ca. 280 mmz-travel: ca. 400 mmtotal power requirement: 5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,52,52,5 mNo. 5100:1 used vertical milling machineFRITZ WERNER, type FV 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 350 mmz-travel: 500 mmtotal power requirement: 3 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 3701Vertical console milling machineHESSAPP HC 50 etWorking area: 600 x 350 x 500Drive: 2,3Control: Heidenhain TNC 135 / IndramatTable surface 1180 x 330 mmSpeed range 70 - 6000 rpmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heynumill 2700-PF from the manufacturer Heyligenstaedt. The machine is also energized and can be viewed at any time. Please refer to the photos for the data If you have any questions or need more information, please feel free to contact me.

The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

FEELER VMP 32 CNC vertical machining center was built in 2012 in Taiwan. This versatile machine with extensive machining capabilities is specially designed for precision machining of heavy workpieces weighing up to 800 kg. To achieve excellent precision and accuracy in machining process, reliable components in the form of the spindle and cutting tools taken from the 22-position tool magazine are utilised. In addition, movement of the X,Y,Z axes is performed on ground rolling guideways, resulting in excellent dynamics and feed repeatability. All machining parameters are programmed in an intuitive CNC control from the renowned company FANUC. The FEELER milling center weighs 5800 kg. Technical data of the FEELER VMP 32 CNC milling machine - CNC controller: FANUC Series 0i-MD - feed in the X/Y/Z axis: 820/520/505 mm - rapid traverse in the X/Y/Z axis: 40/40/30 m/min - work table surfa ...