milling machines used for sale (2,498)

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mmControl: Typ Fidia C20/6H-SB total power requirement: 90 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year: 2016 - technically efficient, ready to work - after full service - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: PHILIPS CNC 432 table surface area: 740 x 440 mmspindle taper: SK 40 spindle turning speed range: 20 - 5000 U/minfeeds: 1 - 4000 mm/minrapid traverse: 6 m/minquill stroke: 80 mmtoolpiece magazine: chain magazine: 30 Postool diameter if 2 vacant positions: max. 130 mmtool diametre at full load: 100 mmtool length - max.: 250 mmweight of tools max.: 8 kgtotal power requirement: 15 kVAweight of the machine ca.: 3,8 tAccessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size mm 320×1320 Table turning (left – right) degree 45° Travels, X/Y/Z mm 950/320/460 Spindle taper ISO 50 Number of speeds 18 Spindle speed range rpm 40÷2000 Longitudinal and cross feeds range mm/min 12,5÷630 Vertical feeds range mm/min 5÷262 Main motor power kW 7,5 Overall dimensions mm 1747×2050×1780 Weight kg 2850

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 270 ...

Stock number: 3885 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 14187, Year of manufacture: 2000 Specifications: Table size 1000 x 560 mm Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10,000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 430 Fabr. Operating hours spindle 9318 hours Accessories: Chip conveying. Touch Probe Renishaw Cooling by spindle Spindle Cooling Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Clamping pads, fork clamping iron, tension screws clamping stops, clamping pins; Step claw

Inv. Num. : 6633 Type: RLG 470-2 Producer: LENZ Created: 2006 Parameters: Control System: Screen Meyer Sinudyn Maximum vertical spindle speed: 60000 1/min X-axis travel: 470 mm Y-axis travel: 650 mm Z-axis travel: 50 mm Accuracy: 0.003 mm Machine height: 1550 mm Machine length: 1820 mm Machine width: 1720 mm Machine weight: 2500 kg Equipment: Technical Documentation Temperature Unit

Inv. Num. : 7310 Type: KX3 Producer: Numco Generated:- Parameters: Control system: MACH 3 Maximum bore: 20 mm Work table length: 450 mm Work table width: 160 mm Maximum vertical spindle speed: 5000 1/min X-axis travel: 300 mm Y-axis travel: 150 mm Z-axis travel: 290 mm Cone: MK3 Machine height: 1750 mm Machine length: 800 mm Machine width: 780 mm Machine weight: 220 kg

Inv. Num. : 7298 In good technical condition.

MECOF CUTTER MOD. CR15 NC ECS 2301 4 AXES 1 mt BOARD.

Specifications: Workspace X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working spindle Tool holder: ISO 40 Auto. Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Rigid table: max. load capacity of 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Dimensions: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Rigid table - Milling head swivels +/- 90° - Hydr. Clamping device - Coolant device - Emergency stop push button

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

X axis travel 5000mm Y axis travel 2500mm Z axis travel 1500mm C axis automatic head cnc rotary table CNC Heidenhain 530 machine in excellent conditions.

Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

Key data: 500 mm, 250 mm, 260 mm

quill stroke 480 mm , table 800x320 , max. 300 kg , SF 32 , 100-9.000 rpm , 5kW , 60 Nm , Heidenhain TNC 124 ,

Inv. Num. : 7252 Type: SMX Producer: REXIM Created: 2018 Parameters: Work table length: 1350 mm Work table width: 355 mm Maximum table load (uniform): 600 kg Maximum distance between the spindle and the table: 520 mm