milling machines used for sale (2,493)

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg

x-travel: 4000 mmy-travel: 1000 mmz-travel: 1000 mmtotal power requirement: 22 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 10.000 x 6.000 x 4.250 mBrand: SoraluceType: Soramill 4 TF4CNC brand: HeidenhainCNC model: TNC 415 BYear of make: 1995Table length: 4.000 mmTable width: 1.000 mmX: 4.000 mmY: 1.000 mmZ: 1.500 mmSpindle taper: ISO50Speed: 3.000 RPMHuron milling headMotor: 22 kWMachine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mmMachine weight: 25.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mmy-travel: 1.500 mmz-travel: 3.000 mmControl: SIEMENS 840 D milling head -swivable: 0,001/0,001 Gradmilling head: Universalfräskopf 45° Internal cooling system: 20 barChip coveyor: ja Tools changer: 30 pos.coolant: 1.100 lTool taper: DIN 69871A ISO 50total power requirement: 45 kWweight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with !urning Speeds 6.000 r.p.m.AutoIndex Head 45 º Head 360.000 Pos.Elbow 360.000 Pos.Main Motor Power 37 Kw.Nº Change Range 2 RangesAutomatic Tool Charger INCLUDEDTools at ATC 30Coolant Through Tool 20 Bar INCLUDEDSoluble Oil Tank with filter paper INCLUDEDHead Coolant System + CF Box INCLUDEDLongitudinal Chip Conveyor INCLUDEDOperator?s Platformd with 2000 mm Vertical movement. INCLUDEDReady for Rotor Translating Table(Regulator + Wires)  ...

x-travel: 1100 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mmtable face - lower: 1870 x 300 mmspindle speed:: 3000 Upmspindle motor: ca. 9 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHorizontal and vertical millingPosition change of the head is done manuallyVertical head with drilling quill, drilling depth 100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mmgear width: 55 mmmax. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mmspiral angle: 0/60 °max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mmblade head turning speeds: 20-110 1/mintotal power requirement: 100 kWweight of the machine ca.: 16700 kgdimensions of the machine ca.: 5200x2300x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kWtool adaptor: 0 total power requirement: 0 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

x-travel: 1000 mmy-travel: 300 mmz-travel: 400 mmtable-size: 1320 x 360 mmspindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/mintotal power requirement: 4 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,1 x 2,1 x 1,95 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmspindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/mintransmission ratio: 18 feed range: 0,1 - 2000 mm/minrapid traverse: x = 4 / y = 3 / z = 5 m/mintable load capacity: 250 kpvoltage: 380 V / 50 Hzspindle drive: 5,5 kWtotal power requirement: 16 kVAweight of the machine ca.: 2,6 tdimensions of the machine ca.: 3,8 x 4,3 x 2,0 m• CNC-control system 432 E• Operating hours: 37719The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mmy-travel: 300 mmz-travel: 350 mmtable surface area: 350 x 200 mmspindle turning speed range: 475 - 20000 U/mintotal power requirement: 0,4 kWweight of the machine ca.: 0,46 tdimensions of the machine ca.: 1,2 x 1 x 1,4 m• without templatesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 350 mmz-travel: 140 mmtable surface area: 700 x 300 mmspindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/mindistance spindle center to column: 395 mmdistance spindle nose and table: min. 170 -max. 550 mmcontrol: TNC 407 milling feeds: 3 + 2000 mm/minrapid traverse: 5000 mm/minspindle drive: 5,5 kWtotal power requirement: 9 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,5 x 1,8 x 2,2 m• control HEIDENHAIN TNC 407,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mmy-travel: 900 mmz-travel: 1000 mmControl: heidenhain tnc 415B total power requirement: 22 /spindel kWweight of the machine ca.: 16.5 tdimensions of the machine ca.: 7.2x3.9x3.2 mMake SORALUCEType Soramill SL 5000Built in 1995Control type HEIDENHAIN TNC 415 BTable size (mm) 5000 x 800 mmX out (mm) 3500Y-off (mm) 900Z-off (mm) 1000Maximum table load 12,5 tonSpeed (RPM) 20-. 2,000Tool holder ISO 50Feed along (mm/Rev) 5 - 10000 mm / min.Rapid traverse 12 mtr/min.Gesamtleistung(kW) 22Length (mm) 7250Width (mm) 3900Height (mm) 3200Weight 16500 kg Additional informationAutomatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmableCooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mmy-travel: 3100 mmz-travel: 1200 mmControl: total power requirement: 20/27 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15x6,2x6 mStock number 1110051Machine type CNC Portal milling machineMake CORREARapid type 50Year of manufacture 2004Control type HEIDENHAINTable size (mm) 5000 x 2000 mmX out (mm) 5000 mmY-off (mm) 3100 mmZ-off (mm) 1200 mmTable load Max 15 tonSpeed (RPM) Max 18,000Tool holder HSK 63Gesamtleistung(kW) 20/27Length (mm) 15000Width (mm) 6200Height (mm) 6000Weight 65 ton Additional informationTool changer for 24 tools5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mmy-travel: 2000 mmz-travel: 3000 mmControl: heidenhain TNC 415 total power requirement: 34 kWweight of the machine ca.: 31 tdimensions of the machine ca.: 7000 mm mStocknumber 1110055Type of machine CNC Floortype milling machineMake ZAYERType KCU6000Build in 1992Type of control Heidenhain TNC 415X-stroke (mm) 6.000Y-stroke (mm) 2.000Z-stroke (mm) 3.000Speeds (Rpm) 20 - 1.800Admission in spindlehead BT50Feeds X (mm/R) 5 - 5000 mm/minFeeds Y (mm/R) 5- 5000 mm/min.Feeds Z (mm/R) 5- 5000 mm/min.Rapid feeds 10.000 mm/min.Total Power (KW) 34Lenght (mm) 11.000Width (mm) 2.500Height (mm) 7.000Weight 31.000 Kg Additional informationJuaristi MG6 turntable: 1500 x 1200 mmCooling system: 2.5 BarTool cooling: 15 BarThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 14.000 mmy-travel: 1.500 mmz-travel: 3.000 mmControl: Heidenhain Itnc 530 total power requirement: 50 kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1110049Type of machine CNC floortype milling machineMake FPTType Spirit 130Build in 2012Type of control HEIDENHAIN TNC Itnc 530X-stroke (mm) 14.000Y-stroke (mm) 1.500Z-stroke (mm) 3.000Speeds (Rpm) max. 4.000Admission in spindlehead Iso 50Rapid feeds max 25.000 mm/min Additional informationProgram run 9655 hourThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: mmControl: Heidenhain tool taper: SK 40 : 13,5 kwturning speeds: 3150 U/mintotal power requirement: kWweight of the machine ca.: 3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 420 mmControl: Heidenhain Tnc table-size: 900 x 460 mmturning speeds: 4000 U/mintotal power requirement: kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/mindrive motor: 15 kWweight of the machine ca.: 0,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mmgear width: 55 mmmax. module: 6 min. module: 1 Control: 840 C Siemenstotal power requirement: 100 kWweight of the machine ca.: 16,7 tdimensions of the machine ca.: 5,2 x 2,3 x 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/mindrive motor: kWdistance spindle - column: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition