other wood working machines used for sale (1,349)

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.

Untha RS30 S Motor 2 x 11KW Weight 1.3t 4 Waves Control cabinet Machine is immediately ready for use

Untha RS30 S Year of manufacture 2007 New set of knives with two knives on one disc! Motor 2 x 11KW Weight 1.3t 4 Waves Control cabinet Machine is immediately ready for use

Weima WL 15 Motor 55KW Wavelength 150cm Hydraulic Moving Floor New blades on the shaft and counter blades The machine is immediately ready for use

Vecoplan VAZ 130 M Motor 37KW Shaft length 1300mm Year of construction 2015 Machine is immediately ready for use and in top condition!

Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Rippert, Radial fan, extraction blower, fan type T8-355/2-A -Volume flow: 7100 m³/h -Total pressure: 4300 Pa -Motor: VEM 18.5 kW 2920 rpm -Inlet connection: Ø 300 mm -Output connection: 305 x 305 mm -Fan wheel: Ø600 x 140 mm -Number: 2x extraction fans available -Price: per piece -Overall dimensions: 1760/1030/H1110 mm -Weight: 442 kg/unit

Chipper shredder KLOCKNER 120×500 K-2WV Inlet width 520mm Inlet height 180mm Shaft width 520mm Shaft diameter 400mm Number of knives 2pcs Sieve dimensions 100x100mm Pulling shaft gear from bottom shaft motor 2.2kw Top Gear Pulling Shaft Motor 2.2kw Feeder length 4400mm Feed belt width 500mm Feeder motor power 1.4kW Main Cylinder 55kW

: 800 x 600 mmMotor output: 18,5 kWDiameter of the motor: 252 mmWeight: 1.300 kg: 15 mmnumber of blades: 14 turning speeds: 90 U/minNumber of working hours: ca. 1.244 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 800 x 1.000 mmMotor output: 18,5 kWDiameter of the motor: 368 mmWeight: 1.500 kg: 15 mmNumber of working hours: ca. 4.456 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nestro colour mist column - built in 2003 -Ideal for small and medium-sized businesses 4 swivel castors provide great mobility and easy handling 3 filter mats (will be replaced) ensure optimal filtration and a dust ejection of less than 3 mg/m³, according to TA Luft The built-in double-sided centrifugal fan is low noise, the high-performance impeller with a Efficiency of 82% is enormously economical (LxWxH)- 600x800x1200 mm Filter area - 1.5 m²

Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details.

ALKO ECO-JET 35/3N onderdruk afzuiging, met perslucht reiniging Manufacturer: ALKO Type: ECO-JET 35/3N Year: 2004 M-Nr.: 33184130 Vacuum filtering plant: Diameter dust extraction pipe: ø250 mm Length: 2.925 mm Width: 1.230 mm Height: 3.440 mm Weight: 816 kg Capacity: 3.000 m3 /uur Pressure: 3,050 Pa Power: 4.kW, 380V, 9 Amp Filter surface: ca.23 m2 Cleaning: Inclusive Average noise level: 77 dB(A) Fire safety precaution: Sprinklers – pipe with connected to automatic fire fighting system Scope of supply: Filtering installation, machine control,

Verhagen Industrie high vacuum hoover Type: Comzu F3313 B3 VLSFF313003-B3 Year: 2006-2015 Electrics: 380V / 220V Power: 3 1.1 KW Construction: Stainless steel container, solid subframe for construction site with wheels Capacity: 628 m3/hr Vacuum: 220 mBar Filter cleaning: Manual Container: 45 Liter Diameter: ø90 mm Filtering surface: 0,85 m2, Teflon IP44 Noise: < 70 dBa Wheels: 2 Rubber coated Dimensions: (L W H): Weight: 68 kg Optional: Auto start-stop switchbox

AL-KO MobilJet 140 Manufacturer: AL-KO Type: MobilJet 140 Year: 2001 Machine Number: 140/Spez. M/) 750/400 GH Motor: 0,75 KW Pressure: 2,503 Pa. Filter surface: 3 m² Piping: Ø140mm Capaciteit: 1,650 m³/uur Containers: 1 Plastikbeutel 1 x 200Liter Dimensions: 1,2006001.400 mm Condition: functioneel-gebruikt

Holtrop Jansma-AFS vacuum filtering plant 21.000m3/h with 2 cascade installed exhausters, waste disposal starwheel closure, screw conveyor, transport exhauster, air-recovery system, air-pressure cleaning, etc. Manufacturer: Holtrop Jansma – AFS Type: OSFS 185 Year: 2005 – 2015 M-Nr.: Vacuum filtering plant: Diameter dust extraction pipe: ø700 mm + ø700 mm Length: 3.500 mm Width: 2.300 mm Nett working height: 6.200 mm Capaciteit: 21.000 cbm /hour Power: 2 15 kW, 380V, 56 Amp, 10.500 m3/uur, 3.000 tpm, 3.850 Pa, Typ: RL E 550130 Filter surface: 185 sqm Filter sleeves: 150 pcs Length filtering sleeves: 2.200 mm Diameter filtering sleeves: 180 mm Cleaning: Compressed air cleaning Fire safety precaution: Sprinklers – pipe with connection fire fighting Screw conveyor: HJ STH-380 12 tpm Starwheel closure: HJ ZRS-300, 31 tpm Dimensions closure: 250350 mm Transport ventilator: Diameter D ...

Chipper shredder KLOCKNER 120×500 K-2WV Inlet width 520mm Inlet height 180mm Shaft width 520mm Shaft diameter 400mm Number of knives 2pcs Sieve dimensions 100x100mm Pulling shaft gear from bottom shaft motor 2.2kw Top Gear Pulling Shaft Motor 2.2kw Feeder length 4400mm Feed belt width 500mm Feeder motor power 1.4kW Main Cylinder 55kW Net price

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details.

Panel saw Type: CLASS SI 400 Manufacturer: SCM Year: 2023 panel sizing capacity: 3200 × 3200 mm sliding carriage length: 3200 mm cutting width with parallel fence: 1270 mm maximum main saw blade diameter: 400 mm maximum cutting height at 90°: 140 mm maximum cutting height at 45°: 97 mm blade tilting: up to 45° main saw blade speed: 3000 / 4000 / 5000 rpm scoring saw blade speed: 8500 rpm main motor power: 7 kW scoring motor power: 1.3 kW machine weight: approx. 1070 kg EQUIPMENT independent scoring unit professional 3200 mm SCM sliding carriage eccentric clamp extendable frame for angular cuts parallel fence with micrometric adjustment direct main motor start dust extraction from main unit and overhead guard CE safety equipment Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines