sheet metal working used for sale (3,351)

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

pressure: 11 tpunching cross-cut in cmm: diverse stroke: 50 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic punching pressWith 3 punching tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

30 ton 1250 x 2500mm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

4000 x 2000mm 4000w LOW HOURS

sheet width: 2020 mmplate thickness: 2 mmdistance between columns: 2030 mmbending angle max.: 135 °total power requirement: - kWweight of the machine ca.: 1,22 tdimensions of the machine ca.: 2,5 x 1,0 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3000x1500mm

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

sheet width: 3000 mmplate thickness: 10 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: 4,15 x 3,55 x 2 mBrand: DurmaType: DHGM 3010Year of make: 2002Knife length: 3.000 mmPlate thickness: 10 mmElectric backstopMachine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mmMachine weight: 9.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

round bar steel: 45 mmsquare edge steel: 42 mmL-beam: 140 x 13 mmflat steel: 350 x 20 mmpressure: 550 kNthroat: 305 mmnotching: rectangle tool: mmtotal power requirement: 5,5 kWweight of the machine ca.: 1260 kgdimensions of the machine ca.: 1360 x 750 x 1565 mm2 working cylinder with 2 separated electric foot switch for 2-people-handlingNew notching table, new knife for the rectangle notcher and new punching table includedFor further information please see brochure.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: siehe TD mmpressure: siehe TD ttotal power requirement: 4 kWweight of the machine ca.: 0,950 tdimensions of the machine ca.: 900 x 1050 x 1300mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1500 kNchamfer lenght: 3550 mmdistance between columns: 3044 mmControl: Cybelec 34 PS-CN column arm: 350 mmmax. ram stroke: 220 mmdimensions of the machine ca.: 3200 x 4200 x 2100 msheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: siehe TD total power requirement: 11 kWweight of the machine ca.: 4,450 tdimensions of the machine ca.: 3830 x 1160 x 1180 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 24mm total power requirement: 45+22 kWweight of the machine ca.: 43 tdimensions of the machine ca.: 6684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 25mm total power requirement: 37 kWweight of the machine ca.: 20,5 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mmdouble T-iron on the x-axis: unbkt. mmU-iron on the x-axis: unbkt. mmtotal power requirement: 37 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 2900x2300x2150 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mmdouble T-iron on the x-axis: siehe TD mmU-iron on the x-axis: siehe TD mmtotal power requirement: 15 kWweight of the machine ca.: 4,6 tdimensions of the machine ca.: 1850 x 1550 x 1685mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 35mm total power requirement: 45+22 kWweight of the machine ca.: 35 tdimensions of the machine ca.: 5684 x 2280 x 2375mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 40mm total power requirement: 2x37+30 kWweight of the machine ca.: 45 tdimensions of the machine ca.: 6085 x 2630 x 2787mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 50mm total power requirement: 45+45 kWweight of the machine ca.: 72 tdimensions of the machine ca.: 6370 x 3240 x 3660mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 16mm total power requirement: 22 kWweight of the machine ca.: 16,65 tdimensions of the machine ca.: 5560 x 2060 x 2050mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 10mm total power requirement: 15 kWweight of the machine ca.: 10,6 tdimensions of the machine ca.: 5310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.