sheet metal working used for sale (3,291)

: 220 kNsheet thickness - max.: 8 mmtravel -x axis: 2500 mmtravel -y axis: 1250 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate length: 1250 mmplate thickness: 8 mmPunching capacity: 220 kNNumber of working hours: 51.658 htotal power requirement: kWweight of the machine ca.: 11.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details.

plate thickness: 4 mmroll diameter: 125 mmthroat: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,6 x 0,6 x 1,2 mmExhibition machine, unused.• 5 speeds• Foot control• Brake motor• Emergency stop• Hydraulic roller adjustment• Special tool setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mmpressure: 18 tblade length: 220 mmangle adjustable from - to: 90 Gradtable surface area: 1100 x 950 mmchamfer lenght: 835 mmtotal power requirement: kWweight of the machine ca.: 1,1 tdimensions: 1,2 x 0,8 x 1,4 mCombination machine: edging and notching- foot switch- Emergency stop switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 3 rolls driven- 2 lateral guide rolls- Digital readout for position rolls- Set hardned universal rolls- Set hardned profile rolls

Key data: 6000 mm, 2 mm

to sell on behalf of: Hydr. CNC Long Bending Machine OEMB H200.60 Bending capacity 6000 x 2 mm (aluminium 3 m m) With hydr. Adjustable upper beam (adjustment sheet thickness / radius) With hydr. Roller shears with parallel stop with CNC control approx. 6500 kg

Ref.No. 00909 Name of the plant: Strip steel straightening line Manufacturer: Werner Müller Stanz Umformtechnik Type BRMU- 065 – 01 – 05 With CE mark Year of construction 2010 Machine hours 3500 h Belt width max 120mm Material thickness max 5mm Material thickness min (steel) 0.7mm Speed Max 30m/min Motor power 2.4 kW Straightening roller diameter 65mm Feed roller diameter 97.5mm Feed speed +- 1mm Technical condition Ok Submission date Immediately

Single cylinder punching machine equipped with three separate working stations for different tasks: punching, shearing flat bars, and cutting angles. Punching capacity: 36t. Diameter 28 mm in 10 mm thickness. Flat bar shearing: 350 x 6 mm. 200 x 13 mm. Angle cutting at 90: 80 x 80 x 8 mm. Angle cutting at 45: 50x50x6mm.

Key data: 175 t, 4050 mm, 3600 mm

Capacity: 4050 mm x 175 Ton. Distance between frames: 3600 mm. Stroke: 265 mm. Control: DURMA DT15 (3D Touch Screen). Dimensions: 5200 x 1900 mm. Height: 2930 mm. Weight: 12,750 Kg.

Key data: 4100 mm, 6 mm

Capacity: 4000 x 6 mm. Stroke 120 mm. DURMA DT-7 Control. Serial No. 608922260. Dimensions: 5230 x 3600 mm. Height 2150 mm. Weight 11460 Kg

DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...

Offer 26035 Technical data - Three driven rollers, each roller hydraulically adjustable - For bending and conical rolling, side bracket can be swivelled out - Operation of swivelling control panel with digital actual value displays - Max. working width 3050 mm - Max. sheet thickness at 400 N/mm² without bending 20 mm - Bending at bending diameter min 5 x top rolling. 16 mm - Upper roller diameter 340 mm - Side roller diameter 250 mm - Lower roller diameter 300 mm - Drive 400 V / 9.5 kW - Working speed adjustable - Space requirement approx. W 6200 x H 1650 x D 1650 mm - Weight machine approx. 16000 kg - Total weight machine + support mast + support arm 19500 kg with: - Extended roller ends for attaching profile rollers - Conical bending device - Side support arm hydraulically movable - Upper support mast hydraul ...

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

Key data: 1020 mm

used, small table bending machine incl. frame, clamping is done via crank, bending beam 10mm, machine in its existing state, without function control, i.e. the machine is not overtaken by us Working length: 1020 mm Sheet thickness steel: 0.7 mm Color/: Green Dimensions: 1400 x 500 x 1200 mm Machine weight: 150 kg Opening width: 85 mm Bending Angle (Max): 105 degrees

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details.

Press brake manufactured in 1999. This AMADA HFB 5020 features a maximum pressing force of 500 kN and a maximum stroke of 200 mm. With a robust machine weight of 4700 kg, it is designed for durability and efficiency. If you are looking to get high-quality pressing capabilities, consider the AMADA HFB 5020 machine we have for sale. Contact us for further details.

This 3-axis Bystronic BySpeed 4020 was manufactured in 2012. It features a maximum sheet size of 4000 x 2000 mm and is equipped with a 4.4 kW CO2 resonator. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 4020 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.